ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ต่อไป
เล่นอัตโนมัติ
#181 ATTiny13 (and ATTiny85) Development Board, amazingly usefulRalph S Bacon
มุมมอง 11K
Everything You Need to Know about MOSFETsElectrArc240
มุมมอง 23K
I run untested, viewer-submitted code on my 500-LED christmas tree.Matt_Parker_2
มุมมอง 10M
Send this to an artist to make them… 🫢✨🎨 #artistomgArtistomg
มุมมอง 14M
ขวดน้ำนำโชค #ตู้ซ่อนหมีตู้ซ่อนหมี
มุมมอง 298K
Top Fifteen Mistakes People Make When Designing Prototype PCBsCosplay Light and Sound
มุมมอง 143K
Bare-Metal MCU #9 - Review; ATTiny85 from scratchMitch Davis
มุมมอง 66K
How to Program an attiny with an Arduino Uno (With Serial Printing)Make it for less
มุมมอง 3.2K
Program the ATTINY85 with Arduino 1.8.18 (2022)DIY TECH BROS
มุมมอง 71K
Make your own DigiSpark USB!Mr.T's Design Graveyard
มุมมอง 42K
My First ATTINY85 Project!upir
มุมมอง 82K
ATtiny85 MicrocontrollerMark Gunnison
มุมมอง 7K
สุดดยอดการ์ตูนช่อง 9 ที่พลาดไม่ได้ของ ชาโม่คุงOnline Station
มุมมอง 184K
กินจนอิ่ม แล้วโวยขอเงินคืน ก่อนขอโทษวอนลบคลิป l ตลาดข่าว - ข่าวเช้าเวิร์คพอยท์ l 13 ส.ค.67ข่าวเวิร์คพอยท์ 23
มุมมอง 568K
The Joker was dragged away by Harley Quinn!?#joker #shortsUntitled Joker
มุมมอง 1.9M
@ Zhindong Da Fei Xin (O2546321517)# Old Iron Alopecia Rescue PlanWang's Funny Videos
มุมมอง 450K
มติศาล รธน. ฟัน "เศรษฐา" พ้นเก้าอี้นายกฯ | ข่าวเย็นช่องวัน | สำนักข่าววันนิวส์ข่าวช่องวัน
มุมมอง 512K
Should I make a tutorial on programming the Atmega328p or the ATtiny13a?
Of all the videos I have looked at, this is the 'Holy Grail'. Top marks. I had built a shield for my Uno based on the instructions from another video. Got the PCB made and inserted the relevant components, Attempted to program an ATTiny85 - Nothing!! Tried all combinations of settings. Nothing. Programmer required!! Looked at other videos. Still no joy!
Came across your video an noticed the words 'Complete in-depth tutorial' and thought, Okay. try this one to see what happens. Wired up the breadboard as per your instructions and set the test program up. THEN CAME THE CRITICAL BIT at 12:20 in the video!!
None of the other tutorials mentioned using the 'Upload using Programmer' command in the sketch menu. WHAT!!! OKAY!!. Hmm!! Do as the man says!! It uploaded to the breadboard setup and I had no errors. OKAY!! Try the Blink sketch. Uploaded it and Hey Presto! the LED started blinking!! One happy guy so, curiosity then kicked in.
I installed the PCB header I got made. and uploaded the same sketch. Boom!! LED started blinking on the PCB.
BRILLIANT!! And all because of one small command - A KEY STEP!! - that every other video seems to have missed out.
Thank You!!
Awesome! I'm so glad the video helped you with your project! 😊
Reading comments like this makes me so happy! I'll be making more videos like this for programming all the components that I can't find proper tutorials for. :)
Future Edit: I liked your comment so much that I’m actually going to save it to my phone notes and read it every time I don’t feel motivated to record/edit a video. Thank you ❤️
Hi, I was getting so frustrated, then I found your tutorial. It worked right away. THANK YOU so much!
Oh you’re very welcome!
It’s only happened a couple times so far but it makes me so happy when someone says that they got something to work after seeing one of my videos! 💚
I had similar frustration i will try it. Only diffrence for me is i did not use capacitor .
I had frustration also since I got invalid signature error when uploading i will try this. Only diffrence for me is i did not use capacitor .
So the capacitor made it work properly right? Or was it the other way around and removing the capacitor made it work?
@@KeonsLab no dear no it did not. I feel it csnnot be connections
Perfect video lesson.
I have damaged an Attiny85 tried in other ways. Your explanation is accurate and it works, it works very well.
Thank you very much.
You’re very welcome!! 😁
Nice👍, very interesting.
Now learned something new, thanks to you.
Keep doing such interesting videos.
Aw that’s awesome! When I read comments like this it makes me so happy 😊 I’m so glad you found it interesting and I’ll definitely keep making cool videos!
Thanks buddy, good video 🎉🎉
You’re so welcome :)
Such a clean and well explained tutorial! I suppose this will work the same for other Attiny85 variants such as the ATTINY85-20SU model? I also noticed this smaller version is used in Digispark Attiny85 boards. I have a few 20SU that i need to program and then i will have to solder them to the ready PCB i ordered. Since this model is smaller, i will have to connect it to the breadboard using a OTS-20-1.27-01 SOP8 adapter socket.
I’ve never tried the ATTINY85-20SU but I’d imagine it should also work if it’s got the same overall specs as the ATTINY85-20PU.
I glanced over the specs and it seems like the 20SU is just the surface mount version, and since you said it’s also used on those digispark boards, I think it’s got a pretty good chance of working the same.
@@KeonsLab thanks! I will update if i successfuly program the 20SU using your clean method! 👍
Sounds good, I wish you luck!
@@KeonsLab update. Worked perfectly using your method! Used the adapter i was talking about and everything went smooth. Code upload success! Thanks to your well informed and clean tutorial! Thanks mate! Cheers!
Awesome!!😄
Always wanted to use these little guys but the documentation isnt as easy to understand for me. Maybe now I can give it a go. Thanks for the video.
Definitely! It’s really straightforward too, just make sure you get the ATtiny45 or 85, not the ATtiny13 because that programming that one needs some extra steps.
Why do we need to insert a 10 uf cap ??
(If I remember correctly) It’s to stop the Arduino from self-resetting when uploading (I hope I’m getting that right but it’s just for stability when the ArduinoISP is uploading to the ATMEGA)
Excellent, thank you!
Btw 8192 bytes is exactly 8 kB.
Right!
Hi im getting theerror invalid signature failed to erase chip. Wiring correct.please help.
I’ll try my best here with a comment but if you still end up needing help, feel free to send an email to the channel’s email address accessible on the ‘About’ tab of the channel page.
Ok so let’s try and solve the issue, that error is one I usually get when something’s wrong with the physical integrity of my connections, so everything may be wired up correctly but it may be something like the breadboard or wires themselves that’s causing the issue.
Since I can’t really tell you how to fix it without any context, I’ll leave a few questions below to get a better idea of what may be causing your error:
- Have you burned the Bootloader successfully?
- Is the programmer set to “Arduino as ISP”?
- Are the jumper wires you’re using new or have they been used a lot or with currents over 1 Amp?
- When you insert a resistor lead into the breadboard, does it seem to make a snug fit or does it just barely grab on?
- Not a question but try rewiring everything with different or unused jumper wires on either the other side of the breadboard or on a different breadboard if possible.
- What is the CPU frequency for the attiny set to? If not already, try 1 MHz instead of 8 MHz.
@@KeonsLab ok
Cannot find an email in About section please
I have the error invalid signature and failed to erase the chip. Somehow first time worked then I wanted to amen program . Then continuely error there. Similar errorcthere for ATTiny13 also. I refrred help lines in Arduino community website. But was not successful .
Downloaded library using your link.