I finally found a use for the fluid splitter, lol. I have all of my water sources going up to a single water barrel as primary storage then to a fluid splitter that connects to 3 more barrels. I have 3 separate areas in the farm and each barrel supports each single area because they are different sizes and get different usage. So the primary barrel can keep all 3 topped off.
I've always found Genetics to be one of the most confusing things, however after watching this video, it's clear to me that it actually isn't all, that I make it out to be.
Amazing guide thank you so much! Very concise and useful information presented very clearly! The one detail you missed (along with every tutorial out there), is whether we need seeds to be crossbred or if we can crossbreed clones too. And if the position in the planter has any importance for which plant gives genes and which is crossbred, or is it only based on weight no matter the position and seed or clone?
Something that was not mentioned was how to go about actually farming the crops. How many to clone vs how many to harvest. I find my self running out of seeds and clone, especially while feeding horses.
This gets even more complicated and interesting, you'll be surprised how redundant the cannabis plant is for so many scientific ways in multiplication offspring.
Ok so I seem to be dumb and can't understand this. If I have the gene YYYWGG, and I want to replace the W, how would I replace it without changing my Y and G genes?
@@SamaelHellscrem If you already have YYYYGG or YYYGGG, then why bother crossbreeding at that point. Just clone either of those two instead. You would need something like your YYYWGG along with something like a YXYYGG, YYYYXG to get a YYYYGG.
Great video.. but I'm still confused on when to plant the clone vs when to plant the other seeds in the planter. Assuming I want all other plants to take on the genetics of the clone, do I wait until the other plants have hit the crossbreeding stage before planting the clone? Do I plant the clone when the other plants hit the sapling stage?
Could someone please explain what am i doing wrong? i combined those plants: XYYYGH, YYYYYX, YGWGHH, I expected to get YYYY(random)H but instead i got XYYWGX, what do i do wrong?
Beautiful video, great explanation, sadly i don't know why i can't use the ''planttick'' command in the console, only the ''planttickscale'' one. With "planttick" i receive a message: "Cannot set replicated convars from the client" and i don't know what to do
Hey, i tried this with potatoes, it don't work. Any changes for weightage to potatoes? Even online calcs gave me the genes I calculated, but the game gave me different
You should make a video on fertilizer I dont understand how much fertilizer I need per large planter for like a day with all 9 slots tooken up with hemp seeds @Game Guides
Each plant uses only 1 fertilizer throughout it's entire life cycle. So 9 per full planter, per cycle. The fertilizer is consumed instantly when a seed is planted.
I don't anderstand perfectly. the plan i want to cross breding, for exemple i have a YYYGGX and i want to replace my X by a G. So i plant this clone, wait the sappling stage and after i plant some other clone with /////G at the end ?
When you want to replace X in this scenario you would need to mix and match clones that don't impact other stats which is the tricky part and typically takes a fair amount of clones. I would use your base clone to help with the weighting and then look for other clones that have a mix of Y's and G's e.g. YYYGGX WXHGXG XYYHGG YHWGGW Ideally, your aim is to ensure you have at least 1 duplicate set of genes for what gene you want in that column and no other duplicates, this way you know you've always retained the dominant gene. It all sounds simple in practice, but trust me it's not. A little tip would be to use your base clone to make "broken" clones e.g. crossbreed YYYGGX with something that gives you the G at the end, but then corrupts other genes and turning it into something like YYWHGG, then crossbreed this with the original clone and then other clones to help you get your weightings.
What's the issue? Does the command register and display the new value correct? Or are you wondering why the value keeps getting reverted when you quit then start up the server again?
@@DD-mc9bt Take a look inside your server.cfg or serverauto.cfg for it. If it's not there, add it yourself. (server.planttickscale "2"). I've never had an issue where a convar says it "can't be changed". It does not need to be modded.
Something thats been confusing me until just now, as i watch this video, is thw plant you set first dosen't matter, when crossbreeding occurs, only the surrounding plants genes are considered, not its own, noone says this, not even you, just realized it myself, and thoughti should mention it here, cheers!
I only pick out the smallest plant in the box, and clone the bigger plants.. That's given me a great result every time, and I dont have to put that much time into it.. And water is on 24/7, ground quality is always around 65/70% even with fertilizer from horse dung, as that produces the most fertilizer.. Just have 2 horses, hit them with the jackhammer once in a while, and they never stop pooping 💩 Fertilizer for days 😀
Dude, why are informative and important things on everything get no popularity nor support? So the stupid and toxic things get all the credit? I'm going crazy in this mad world...
Mostly due to youtube's algorithms and my overall content. As I do a lot of other Games I'm only releasing future Rust videos on my new channel The Science of Rust th-cam.com/channels/4vsL5V8snt21G99Qm2M9ew.htmlvideos my next video has so far had about 30 hours of research and experimenting in and still have some ways to go.
ty for explaining this but i will never understand how on earth I will get this ever right during my lifetime!!!!! Lord have mercy!!!! This is soooooo not funny anymore! I have had it with this... :(
Finally! A video I can follow easily!
Thanks, glad it helped!
its 3 am and im watching rust plant genetics videos
“Too much water can have a negative effect on plants” damn, he got me.
Nice to have timestamps! Clear and concise explanations!
I finally found a use for the fluid splitter, lol. I have all of my water sources going up to a single water barrel as primary storage then to a fluid splitter that connects to 3 more barrels. I have 3 separate areas in the farm and each barrel supports each single area because they are different sizes and get different usage. So the primary barrel can keep all 3 topped off.
I don't understand the crossbreeding stage where you had the plants at different parts of there cycle
Watched many tutorial vids, this one was the BEST.
I've always found Genetics to be one of the most confusing things, however after watching this video, it's clear to me that it actually isn't all, that I make it out to be.
Clear explanation, thank you !
Amazing guide thank you so much! Very concise and useful information presented very clearly!
The one detail you missed (along with every tutorial out there), is whether we need seeds to be crossbred or if we can crossbreed clones too. And if the position in the planter has any importance for which plant gives genes and which is crossbred, or is it only based on weight no matter the position and seed or clone?
Dude you did a great job! TY
Something that was not mentioned was how to go about actually farming the crops. How many to clone vs how many to harvest. I find my self running out of seeds and clone, especially while feeding horses.
This gets even more complicated and interesting, you'll be surprised how redundant the cannabis plant is for so many scientific ways in multiplication offspring.
Clear explanation, Great Video !!!
Thank you!
So I’m guessing you have to plant your seed first and once it reach sapling stage you plant the clones to crossbreed?
Ok so I seem to be dumb and can't understand this. If I have the gene YYYWGG, and I want to replace the W, how would I replace it without changing my Y and G genes?
You would need 2 neigboring plants with an YYYYGG or YYYGGG.
Otherwise you would be worsening your plant or swap genes
@@SamaelHellscrem If you already have YYYYGG or YYYGGG, then why bother crossbreeding at that point. Just clone either of those two instead. You would need something like your YYYWGG along with something like a YXYYGG, YYYYXG to get a YYYYGG.
Great quality video!
Thanks!
how do i make a lot of copys of my clone thats the right one.
Knowledge is power
How much cloth per planterbox with 6 G’s
he dident explain wether they need to be placed east or west from the center plant ?
THANK YOU!
You're welcome!
Great video.. but I'm still confused on when to plant the clone vs when to plant the other seeds in the planter. Assuming I want all other plants to take on the genetics of the clone, do I wait until the other plants have hit the crossbreeding stage before planting the clone? Do I plant the clone when the other plants hit the sapling stage?
nevermind...i rewatched and you explicitly state that the clones should be planted during the sapling stage. THANKS!
this is exactly why I came to this video. lol
Great video, thanks so much
Could someone please explain what am i doing wrong? i combined those plants: XYYYGH, YYYYYX, YGWGHH, I expected to get YYYY(random)H but instead i got XYYWGX, what do i do wrong?
Luv the video man!
I remember in school when I was trying to focus and learn, I use to think to myself what I really need right now, is background music..
Thank you. Very helpful
Beautiful video, great explanation, sadly i don't know why i can't use the ''planttick'' command in the console, only the ''planttickscale'' one. With "planttick" i receive a message: "Cannot set replicated convars from the client" and i don't know what to do
Thanks for vidio, I am wondering how to get the desired result in the minimum amount of actions using ginetics, can you please tell me
"1 square away" = ???? I plant 8 seeds around the edge and then 1 in the middle(in 1 planter)... That works yes? What about the planter next to it?
Hey, i tried this with potatoes, it don't work. Any changes for weightage to potatoes? Even online calcs gave me the genes I calculated, but the game gave me different
You may have hindered the crossbreed process. He explains how to ensure the correct crossbreed at 5:40
how much of a difference between 3y 3g to 2g 4y?
I think more g's means it grows faster. Somewhere n the videos he says I think 3 gs growth time is abt 2.5 hrs vs more y's having a 3hr time.. I think
What do i do when i have the perfect gene? İ Plant the clone and clone again and again ?Or just wait and harvest and duplicate the seed by planting?
always clone, because harvesting doesn’t give u seeds
i get lost completely when videos show colums. i dont get which plants the rows are representing
So does the genetics of the plant being bred have any effect on the outcome or is it just the surrounding plants
Nope, it doesnt count its own genetics
You should make a video on fertilizer I dont understand how much fertilizer I need per large planter for like a day
with all 9 slots tooken up with hemp seeds @Game Guides
Each plant uses only 1 fertilizer throughout it's entire life cycle. So 9 per full planter, per cycle. The fertilizer is consumed instantly when a seed is planted.
I don't anderstand perfectly. the plan i want to cross breding, for exemple i have a YYYGGX and i want to replace my X by a G. So i plant this clone, wait the sappling stage and after i plant some other clone with /////G at the end ?
When you want to replace X in this scenario you would need to mix and match clones that don't impact other stats which is the tricky part and typically takes a fair amount of clones. I would use your base clone to help with the weighting and then look for other clones that have a mix of Y's and G's e.g.
YYYGGX
WXHGXG
XYYHGG
YHWGGW
Ideally, your aim is to ensure you have at least 1 duplicate set of genes for what gene you want in that column and no other duplicates, this way you know you've always retained the dominant gene. It all sounds simple in practice, but trust me it's not. A little tip would be to use your base clone to make "broken" clones e.g. crossbreed YYYGGX with something that gives you the G at the end, but then corrupts other genes and turning it into something like YYWHGG, then crossbreed this with the original clone and then other clones to help you get your weightings.
This translates into berries and other plants right?
If doing berrys just have one more Y than the G.. tbh when i did it was better with more yeilds
I have my own server, but can’t change planttick? Any clue why? Awesome video btw!!
What's the issue? Does the command register and display the new value correct? Or are you wondering why the value keeps getting reverted when you quit then start up the server again?
@@AlexConstantinou it just tells me it can’t be changed. I am running a vanilla server, may be has to be modded?
@@DD-mc9bt Take a look inside your server.cfg or serverauto.cfg for it. If it's not there, add it yourself. (server.planttickscale "2"). I've never had an issue where a convar says it "can't be changed". It does not need to be modded.
the video is so nice
Music?
Something thats been confusing me until just now, as i watch this video, is thw plant you set first dosen't matter, when crossbreeding occurs, only the surrounding plants genes are considered, not its own, noone says this, not even you, just realized it myself, and thoughti should mention it here, cheers!
You may want to watch it again as I literally said exactly that at 8:38
I only pick out the smallest plant in the box, and clone the bigger plants.. That's given me a great result every time, and I dont have to put that much time into it.. And water is on 24/7, ground quality is always around 65/70% even with fertilizer from horse dung, as that produces the most fertilizer.. Just have 2 horses, hit them with the jackhammer once in a while, and they never stop pooping 💩 Fertilizer for days 😀
i just rag my horse like the little bitch he is then locks him away for a day with a few stacks of tatter, jack hammer is a bit brutal brother
When you watch 500 videos on the same thing and then one day just make sense🎉🎉🎉🎉🎉
epic video. helped me dominate the main farming scene. for real.
I still kinda dont understand, Is Crosbreeding worth it when i just wanna farm Berries on large scale?
Dude, why are informative and important things on everything get no popularity nor support? So the stupid and toxic things get all the credit? I'm going crazy in this mad world...
Mostly due to youtube's algorithms and my overall content. As I do a lot of other Games I'm only releasing future Rust videos on my new channel The Science of Rust th-cam.com/channels/4vsL5V8snt21G99Qm2M9ew.htmlvideos my next video has so far had about 30 hours of research and experimenting in and still have some ways to go.
As an amateur plant breeder irl, this shit breaks my fucking brain. They should have consulted someone...
I could not harvest a potato clone in the sapling stage
I think I’m even more confused now😂😂
És defeciente
irl weed farming made me more cash :D
A "haytch" gene
ty for explaining this but i will never understand how on earth I will get this ever right during my lifetime!!!!! Lord have mercy!!!! This is soooooo not funny anymore! I have had it with this... :(
WTF... we got pot head game developers making games for pot heads to grow pot lmao 😂
Hatech lol
Meow
still have no fucking idea what he is talking about feelsbadman
this, was, not a good teaching video. i don't know what i just watched.