Error due to medal and string caught in the pump filter Impeller blades. This is one solution that fixed the issue, the flashing leds could be for another issue as well. BTW, I'm not an WM engineer.
Thanks for this video. I was about to get a repairman called to fix this problem but this video and enabled me to identify the blockage causing the fault and remove it resolving the problem at no cost.
did exactly this, found unbelievable things in the blockage but all sorted. sadly i didn't empty the washer, as water gushed out time seemed to stand still as i spent too long thinking 'leave it, or ram the cap back on' and eventually just left it & fought it with towels. washing machine back to life now. many thanks.
Notice my washing machine is flush with floor, do I pull out legs or have they all been snapped off at some point? It was given to me 10 years ago , can't complain 😊
@@aisling2284 Thanks for your reply! The screwdriver worked like a charm! Unfortunately, I wasn't able to fix my machine. But at least now I know I did everything I could.
Found and removed two hair clips from pump, and it spins freely by hand. But still get all lights flashing, any other ideas? Got some motor brushes on the way as a stab in the dark. Think we'll need a new washing machine very soon.
Hi, i had some problem with my machine. After cleaning the filter, i could open the door. Half way washing starting doing the same thing. Maybe i didn't clean properly! What's your opinion! Thanks
@@basamacionut Drained it again as kept filling up when switched off ..it actually worked ok for one wash but all lights switched off during wash ,even though it kept going ?? 🤔 Now totally nothing ! No lights , not even switching on for at least 10 mins , then all lights flashing again ! 🤷
Thanks for this video. I was about to get a repairman called to fix this problem but this video and enabled me to identify the blockage causing the fault and remove it resolving the problem at no cost.
did exactly this, found unbelievable things in the blockage but all sorted. sadly i didn't empty the washer, as water gushed out time seemed to stand still as i spent too long thinking 'leave it, or ram the cap back on' and eventually just left it & fought it with towels.
washing machine back to life now. many thanks.
Thanks, it worked and the machine started working again
Washing machine now fixed. Thank you ❤
Thank you so much for your video. It helped me to fix the problem !!
Thanks for the vid, i will give this a try in the morning...
Thank You Bro. Followed your video and it resolved the issue. Blessings to You 🙏😊
Thankyou just saved my day
Please put a thin tray underneath to catch the water.
I did same but my washing machine still doing same
Pale se sva cetri dugmeta sta uraditi dali da se ocisti filter masine
Did you fixed the problem with your machine @dijanaivanovic2448
Thanks for this; it's helped me out a lot today! 🙂
cool!
Notice my washing machine is flush with floor, do I pull out legs or have they all been snapped off at some point? It was given to me 10 years ago , can't complain 😊
How can I loosen the bottom bit? I can't do it. Hurting my hands trying to pull it
Same here! It feels impossible! Did you manage it?
@@randomgirlxrulzI did yeah, I just used a screwdriver to sort of pry it open. Hope you get it sorted 😊
@@aisling2284 Thanks for your reply! The screwdriver worked like a charm!
Unfortunately, I wasn't able to fix my machine. But at least now I know I did everything I could.
I’ve tried this but there was nothing in the filter. Any other suggestions by any chance?
I'm no engineer. Someone who sees this video may help you.
Condensers failed in the command electronic board
Found and removed two hair clips from pump, and it spins freely by hand. But still get all lights flashing, any other ideas? Got some motor brushes on the way as a stab in the dark. Think we'll need a new washing machine very soon.
I'm not an repair engineer but some maybe who watch this for help.
Hi, i had some problem with my machine. After cleaning the filter, i could open the door. Half way washing starting doing the same thing. Maybe i didn't clean properly! What's your opinion! Thanks
m.th-cam.com/video/qVwKFUNLKTA/w-d-xo.html
Had this same issue today, blocked filter at the front of the machine
My front loader panasonic won't Finnish a wash. Keeps coming up the malfunction U and 11
My filter is rotating but can't get it out???
gracias
Mine all flashing but no blockage in filter 🤔
Did you fix it?
@@basamacionut Drained it again as kept filling up when switched off ..it actually worked ok for one wash but all lights switched off during wash ,even though it kept going ?? 🤔 Now totally nothing ! No lights , not even switching on for at least 10 mins , then all lights flashing again ! 🤷
Try to replace heater temprature sensor
How is led bilnking repeyar
Mine did that just shook it about and flicked drain back on and it was fine
J'ai la m'aime machine 😢ça marché pas 😢
F08 error code heating error
My indesit washing machine wixl 105 flashing 2 lights one clock and one iron,what's that problem?
I'm sorry I'm not a WM engineer.
Nice
عندي الغساله ماتنطي مي بارد بس مكان البارد ماينطي مي
error F05
And not draining my own.:-(
اشغل الغساله ماتنطي مي بارد احول عل الحار تنطي
You Buy soon washing machine new beko
these washing machines are trash
Most machines are trash