Great video, you forgot to mention when re-assembling the toner blade that the metal spring pin has to be put back in place because otherwise it will knock against the white gear of the other unit and it will produce a rattling sound eventually ripping apart the gear.
At the minute 03:03. The left piece, white, with two semicircles, is broken and fallen. Any idea if it can be changed, what it is called and where it would be found. Kyocera FS-1041 model. Thank you.
I did everything from your video but still my FS 1060DN prints dirty non-white background pages... Also I tried using genuine and non-genuine toners with same results.
Hello Thanks for the video. I have a kyocera F1041. And the the orange light "Attention" is always on. Do you have an idea what's the problem and how can i fix it?
hi please i have a problem with my kyocera 1025, it prints ok but it removes enlarged copies please what can be the problem i've tried setting it but nothing works
My FS 1205 workedfine, then suddenly it can't flip paper anymore for automatic printing on both sides. The paper is correctly printed on the first side, the paper comes outo completely and doesn't get trapped, but then it is released and the printer turns the red light and displays the message error as if the paper was trapped inside, asking to remove the paper. I have to open the back door and close it to erase the message, or to turn off then on the printer. Any help?
Are you sure the chip is working? Probably the firmware version of the chip is not compatible with your printer driver. Also you can try to clean the toner contacts inside the printer
@@viandant5 Thank you very much, you are an icon in your field I meant that when I make copies and print the paper comes out white even though the ink is available. I cleaned all the parts of the printer, but to no avail. I have a Kyocera Ecosys fs-1025 printer
@@ayoubabatk8350 Hi, you can try one of these methods: th-cam.com/video/m8KDO8_c7Ok/w-d-xo.html I think it could be the corona wire or the connections between the drum unit and the printer
Great video, you forgot to mention when re-assembling the toner blade that the metal spring pin has to be put back in place because otherwise it will knock against the white gear of the other unit and it will produce a rattling sound eventually ripping apart the gear.
At the minute 03:03. The left piece, white, with two semicircles, is broken and fallen. Any idea if it can be changed, what it is called and where it would be found. Kyocera FS-1041 model. Thank you.
Kyocera only sells the whole fuser unit
*It prints like no other **Bestt.Digital** printer. i have always loved Epson for the colors they produce.*
O que tu tá falando bicho? kkkkkkkkkk
Thank you so much. Very usefull👍👍
What causes wrinkles on the paper when it comes out of the printer?
It's often a fuser unit problem
Is 1120mfp can print colored
No it can't
@@viandant5 thanks my client got sales talk scam 😂 😂 buying without asking . 6k php is overpriced for windows xp printer 😂 😂
I did everything from your video but still my FS 1060DN prints dirty non-white background pages... Also I tried using genuine and non-genuine toners with same results.
I think you can try to remove all the old toner
Hello Thanks for the video. I have a kyocera F1041. And the the orange light "Attention" is always on. Do you have an idea what's the problem and how can i fix it?
There are no error codes or other indications in the printer folder?
@@viandant5 Hello. No nothing.
@@viandant5 Hello, no more indications.
@@euriel-naturiel You have to download KYOCERA Client Tool
@@viandant5 I can't install it on Windows 11. Have you got other solution?
Cho mình hỏi, mực này dùng mực loại nào bơm vào được? Cảm ơn.
Only a specific Kyocera toner
Hello, paper settings are ok plz is there a way i can send you the photoes so you can understand better plz?
ok link.accessorilibero.it
@@viandant5 sorry the link is failing to open
is it possible to send it through whatsapp or email plz
@@jeremygilberts8667 It's an email
Grey or dirty background fs-1041 after replacing the drum , why ?
Wich tone rdo you use? it could be a toner problem
hi please i have a problem with my kyocera 1025, it prints ok but it removes enlarged copies please what can be the problem i've tried setting it but nothing works
It removes enlarged copies you mean it does not print at all? Are you sure the printer settings are ok?
@@viandant5 yah they are ok, it prints well but produces enlarged copies
@@jeremygilberts8667 I think you have to check the zoom, or the paper settings
The zoom settings are ok, let me try the paper settings
My FS 1205 workedfine, then suddenly it can't flip paper anymore for automatic printing on both sides. The paper is correctly printed on the first side, the paper comes outo completely and doesn't get trapped, but then it is released and the printer turns the red light and displays the message error as if the paper was trapped inside, asking to remove the paper. I have to open the back door and close it to erase the message, or to turn off then on the printer. Any help?
Are you sure the paper settings are correct?
I have broken the heating lamp of fs1120 model , from where I can buy it new heating lamp please help
try alibaba or aliexpress, avoid ebay
I have faced to my kyocera1025 printing blank paper please help me as much as possible
difficult to say but it could be the main board
please fs-1025 printing white page what is its solution please help me
Difficult to say without checking the machine, t could have lot of causes. mainly the drum unit
Kyocera FS-1025 Printing the Paper all of it black what could be the problem
Corona wire, contacts of the drum unit, main board
I fill the new cartage in fs1040 printer but now we command to print documents only white paper come out ( print ink not visible)
The cartridge has a chip, you need to change it
Hello. Please What hapening if kyocera only stay whit the Atention light (red) On and do not do anything....?????
It's a general error, there is no an error code in the printer panel or printer folder?
لقد قمت بنفس الطريقة و الخطوات لكن لم احصل على نتائج جيدة .... شكرا جزيلا لك
Good morning boss i am still having issues with m682z, showing displays"usb error a usb accessory installed that requires too much power"
Are there USB devices connected to the printer?
@@viandant5 no device connected to it
Do you have a mac? Update the soffware, try another electrical plug better directly to the wall
Hi sir Kyocera ecosys fs 1020 is👉 C-31 error code 👈and attention red light on sir please details please
it could be a scanner problem. sensors, motor, scan motor drive board, belt, cable connections
Is repair video please sir
@@asmabegam5791 I have not that machine in office. If I get one of them, I'll do the video
Cyocera FS 1020 blank paper problem,how print it ?
It could have lot of causes, try these methods th-cam.com/video/m8KDO8_c7Ok/w-d-xo.html
Hi sir Kyocera ecosys FS 1020
C-31 error code 👈 attention red 👆👆👆👆👆 is problem
Please sir details please🙏🙏
I have a problem of white page please help me
Check the laser scanner, the connections between the printer and the cartridge but it could be the main board
@@viandant5 I have the problem in Toner and please put a video because i have a problem in magnetic roller No Toner
@@aissatech9881 It could be the contact of the magnetic roller, there is a spring
Non genuine toner showing my printer... I already changed chip but no result.... any solutions...?
Are you sure the chip is working? Probably the firmware version of the chip is not compatible with your printer driver. Also you can try to clean the toner contacts inside the printer
@@viandant5 yes it's working..
Checked in another printer..
Press the orange color button and ok button
Please Dissambly scanner glass Brother DCP 1616NW
I haven't that machine in office but when I find it I'll do
@@viandant5 thank you, my brother 1616nw there is a dirt from inside /bottom the glass scanner, no idea how to clean it
Error E 7 how to solve in 1020
It means that the toner cartridge is empty
عندي مشكلة فالطابعة كيوسيرا 1120 تخرج الورقة بيضاء
Either the [Developer Unit] or the [Image Unit] aren't well seated or placed.
2nd opinion, the voltage isn't reaching any of the previous mentioned.
Sir kya aap apna personal no. De skte hai jispe me apne printer ki video bhej sku kyoki ase bta nhi skte hai hmm aapko mere printer me kya gdbd hai
you can use my email
Printer Kyocera - FS-1025 does not print out white paper
you mean that it only prints white pages?
@@viandant5 Thank you very much, you are an icon in your field
I meant that when I make copies and print the paper comes out white even though the ink is available. I cleaned all the parts of the printer, but to no avail. I have a Kyocera Ecosys fs-1025 printer
@@ayoubabatk8350 Hi, you can try one of these methods:
th-cam.com/video/m8KDO8_c7Ok/w-d-xo.html
I think it could be the corona wire or the connections between the drum unit and the printer
@@viandant5 This is the problem you're talking about
th-cam.com/users/shortsRHA7duekg_A
one gear of developer unit is broken.. how can i change?
i think you can find only the whole unit