Thanks very much for the video, it surely helped me with the brake job. It took several tries but i finally got the instruction down. took me half day to do this brake job and also replaced rotter as well. Again many thanks.
Thanks so much - you saved the day for me. I didn't know about the parking brake service mode so was struggling with retracting the brake pistons. once in this mode doing the brake pads was a breeze
Dude dude. Thank you so much man you saved me thousands. Only take my car in once a year for service everything else I do my damn self. Bunch of rip-off artist 👍🏽👍🏽😁😁👏🏽👏🏽
Thanks for this video. Lots of help. Just want to confirm to I did this with the doors close on my 2015 range rover sport hse. And it did in fact work. Again thanks for this
I also have service required on the dashboard how do I remove it, I’ve had a service but can’t remove it, it also has no service menu on the dashboard 🤔
I did the procedure and the brakes retracted, but not far enough to install the new pads. The caliper would not depress, even with caliper tool. Any help appreciated!
Yeah. Just do the same thing as putting it on to take it off..I figured it out..1. ignition on (engine off) 2. Push (not pull) on brake button. 3. Wait 3sec 4. Press all the way down on gas peddle.(while still pressing button) 5. Wait 3 second 6. Turn ignition on (with other hand) and then off (not super fast) 7. If if doesn't go off (take deep breaths) 8. Try again and repeat steps 1-6 9. Be sure not to let off of the brake Button and gas untill the brake motors are done doing its thing. Takes 9 seconds.
To get out of Maintenance Mode. You do exactly the same as you did to activate Maintenance Mode, EXCEPT you keep the handbrake switch Pushed instead of pulled..
Thanks very much for the video, it surely helped me with the brake job. It took several tries but i finally got the instruction down. took me half day to do this brake job and also replaced rotter as well. Again many thanks.
Dinh Ken Thank you for the appreciation, it helps a ton!😁
Thanks so much - you saved the day for me. I didn't know about the parking brake service mode so was struggling with retracting the brake pistons. once in this mode doing the brake pads was a breeze
Archie Mcspinbender Sry for the late response but Im glad to help you☺️
Dude dude. Thank you so much man you saved me thousands. Only take my car in once a year for service everything else I do my damn self. Bunch of rip-off artist 👍🏽👍🏽😁😁👏🏽👏🏽
No one is ripping anyone off. You pay for the knowledge and convenience.
Thanks for this video. Lots of help. Just want to confirm to I did this with the doors close on my 2015 range rover sport hse. And it did in fact work. Again thanks for this
Does this work for a 2014 Range Rover sport hse?! Thanks
Is this the same procedure for a 2016 Evoque?
Can you turn the Ignition off, once you’ve got it in Service Mode, to save on the Battery?
Great Video. Very helpful.
Thanks bro.
Hi! Thanks! Yes you can.
Thankyou. Much appreciated.
How can i change the rubber dust boot in Range Rover evoque 2013
do you push them at the same time
I also have service required on the dashboard how do I remove it, I’ve had a service but can’t remove it, it also has no service menu on the dashboard 🤔
What happens at 1:30 did you have to press the pushstart again ?????
after you push the start button you need to press and hold the E- brake button so caliper will retract and go to service mode. TY!
babyrr.com/forum/Thread-emergency-parking-brake
Here is a written procedure for dealing with service mode
How do you turn the shit off once its on?
Hi.
I'm doing the same.. but not working.. I removed the old brake pads.. and the electronic brake kicked in.
now I cannot remove the caliper
Priyesh Singh forget about the 2 seconds and just keep then pressed until brake light is on
Antonio Lopez thanks bru.. it never work.. I traded that range over a year ago.
I have a brand new now.
I did the procedure and the brakes retracted, but not far enough to install the new pads. The caliper would not depress, even with caliper tool. Any help appreciated!
I try this and it did not work please re-due video properly
how do the turn the maintenance mode off now that I am done?
Did you figure this out? I cant get the thing out of maint. mode. wtf.
Yeah. Just do the same thing as putting it on to take it off..I figured it out..1. ignition on (engine off)
2. Push (not pull) on brake button.
3. Wait 3sec
4. Press all the way down on gas peddle.(while still pressing button)
5. Wait 3 second
6. Turn ignition on (with other hand) and then off (not super fast)
7. If if doesn't go off (take deep breaths)
8. Try again and repeat steps 1-6
9. Be sure not to let off of the brake Button and gas untill the brake motors are done doing its thing. Takes 9 seconds.
It's same as entering maintenance mode but instead of( push) e brake for 2 seconds it's (pull)
To get out of Maintenance Mode. You do exactly the same as you did to activate Maintenance Mode, EXCEPT you keep the handbrake switch Pushed instead of pulled..