If you have a question about a problem with an antique slot machine I recommend going to www.CoinOpCollectorForum.com and post your question(s) in the slots area. Lots of helpful people there.
Well, thank you from England for taking the time to make this video clearly explaining how the pay out mechanism works. My knowledge of how my own Mills machine is put together is increasing by the day!
Hi... great video, I managed to understand how does it work. Quick question: I have an Aristocrat Arcadian tic-tac-toe model and I miss two payout fingers ( the orange and the prune)... do you have any idea from where I could buy some spares? Thanks!
Question: My machine arm is going into the hole perfectly; however when it pushes the payout bar at the bottom, it does not push it in far enough, so the machine does not pay off with cherries. If I manually push the bottom bar, then the payoff will work. Is there any type of adjustments available to make the top bar push in the bottom bar farther? Thank You, MTZ
Your videos are excellent, thanks...I just bought a Mills 1941 "Diamond" 5 cent machine for $700 in original condition and has been serviced, the machine works just fine but the reels with the fruit are a little out of alignment but it still does the proper payoffs. My question is with the mechanism out is it difficult to realign the reels so that the fruit will display evenly? Thanks
I have a Mills wooden Nickel slot machine (Spearmint Bell) 1918.When I put a nickel in the reel does not spin but it still does a pay out. Can you help or do a video. I can send pictures of the back. I think a spring might have come off but I do not know where.Thanks
one of the disks on two of the machines ive looked at had a hole welded it seemed to line up with a bell fruit it seemed like a possible combo was deleted is this a correct assumption
Could be several reasons: 1. No coins in the payout tube 2. Payout slides are jammed 3. Coins have fallen into the mechanism and blocking the slides 4. Broken springs
This video was made to help out a person who contacted me about a specific problem. Go to www.IBuyOldSlots.com/dvd to see an entire list of help videos I made around slot machines.
Sorry, I don't have time to do a custom video for every single question. I do have a complete set of videos which document how to tear down and put a machine back together but those are not free.
The video I did was as a favor to someone who asked a few questions on the reel bundle. The video addressed his questions. I guess I should have just made it private and not share it with anyone. Other people have commented and said it is useful. Can't please everyone.
If you have a question about a problem with an antique slot machine I recommend going to www.CoinOpCollectorForum.com and post your question(s) in the slots area. Lots of helpful people there.
On my Jennings .10 cent, 4 reel,buckarool,slot-machine has a problem with the four reels all turning at the same time,ect.
Well, thank you from England for taking the time to make this video clearly explaining how the pay out mechanism works. My knowledge of how my own Mills machine is put together is increasing by the day!
So very helpful....I think I've sorted my Nutt & Muddle & Sons "Silver Jubilee"
Its really good one. And well explained, Good job man
Great information
thanks so much very help full . keep posting .
Hi... great video, I managed to understand how does it work. Quick question: I have an Aristocrat Arcadian tic-tac-toe model and I miss two payout fingers ( the orange and the prune)... do you have any idea from where I could buy some spares? Thanks!
Question: My machine arm is going into the hole perfectly; however when it pushes the payout bar at the bottom, it does not push it in far enough, so the machine does not pay off with cherries.
If I manually push the bottom bar, then the payoff will work.
Is there any type of adjustments available to make the top bar push in the bottom bar farther?
Thank You,
MTZ
Your videos are excellent, thanks...I just bought a Mills 1941 "Diamond" 5 cent machine for $700 in original condition and has been serviced, the machine works just fine but the reels with the fruit are a little out of alignment but it still does the proper payoffs. My question is with the mechanism out is it difficult to realign the reels so that the fruit will display evenly? Thanks
No, it is not difficult. You need to loosen the two nuts on the axle which will allow you to align the wheels properly.
I have a Mills wooden Nickel slot machine (Spearmint Bell) 1918.When I put a nickel in the reel does not spin but it still does a pay out. Can you help or do a video. I can send pictures of the back. I think a spring might have come off but I do not know where.Thanks
Try posting your question in the Just Chatting area of www.CoinOpCollectorForum.com
Jackpot party
one of the disks on two of the machines ive looked at had a hole welded it seemed to line up with a bell fruit it seemed like a possible combo was deleted is this a correct assumption
We’re do I buy the paper pay out rolls Symbols
Do you work on them at all?
My mills machine pays 2 coined when it not supposed to
I inherited my brothers Jennings Indian head 13 years ago, since last year it stopped paying out when a winning line came up, any ideas why ? Thanks.
Could be several reasons:
1. No coins in the payout tube
2. Payout slides are jammed
3. Coins have fallen into the mechanism and blocking the slides
4. Broken springs
do you work on them ? This above my head
I only have time to work on my own stuff these days. If you are in the Denver area let me know. Troubleshooting via email is very time consuming.
I pretty much just work on my own machines. No time to work on others.
Cool
So where’s the rest of it, you haven’t shown how to make the slides co-inside
This video was made to help out a person who contacted me about a specific problem. Go to www.IBuyOldSlots.com/dvd to see an entire list of help videos I made around slot machines.
VintageSlots yes I have seen your collection and as I said you haven’t done the rest showing how to make the slides co-inside
Sorry, I don't have time to do a custom video for every single question. I do have a complete set of videos which document how to tear down and put a machine back together but those are not free.
I didn’t ask for that I know how to do that with my eyes shut but you have done half a video
The video I did was as a favor to someone who asked a few questions on the reel bundle. The video addressed his questions. I guess I should have just made it private and not share it with anyone. Other people have commented and said it is useful. Can't please everyone.
clear has mud lol
What is holding these payout fingers back on this video? I have this happening with my non-working Jennings Governor right now. Thanks in advance.