I consult the manual as a reference for specific topics but can't tell you how helpful these vids are for learning the fundamentals in a more enjoyable way. Thanks so much for all your work! Great series; just picked up my 7100 today
Ok. Guess the old days of unpacking the box and intuitively being able to transmit are gone. Thank you so much for the guidance as this 69yo has no patience for a 300p manual. Will be watching ALL the videos. 73 n6iv
Hi Mark. Thanks for the kind words. You can almost use the 7100 without reading the manual, at least just to transmit and receive on 1 frequency. However, there is so much more that the radio can do if you learn it with tutorials or with the manual.
i just got a 7100. Frankly, this video is easier than the manual. :) I have to do a net control tomorrow, so this is a life saver. I would not want to call the club secretary and say I am out of business. So thanks, I think this video was exactly what I needed.
I have a General already-it was much cheaper than a radio. So I just bought an IC-7100, a power supply and waiting on my antenna and cable- really good videos-thanks for your time as a “video Elmer”
Thank you for this. You really don't know how much I appreciate this series. I am a brand new Ham with a brand new IC-7100. I bought the radio because it is an all mode all band radio. After reading through the basic manual and making my way through most of the full manual, then trying to put it into practice I was beginning to think I was way over my head with a radio I had no idea how to use. Looking forward to the rest of the series on this radio. Thanks again. KE8OTX
I almost never make comments but you are doing something I've wanted ever since I got my ic-7100 which is my first radio. There are lots of videos on the ic-7300 but nothing comprehensive on the ic-7100 that I've found. I've learned some new, useful things from video #2 and look forward to continuing watching and learning from this series. You are clear, concise and the camera shots are excellent. Subscribed and liked. Keep them coming!
Excellent video. Just got my technician license and expect to be getting general before too long. Haven't even had a chance to turn my radio on. So glad I found your channel to help me along. Thanks!
The cable is a CAT 6e/7/8 double shielded Ethernet cable. A 15' cable Cat8 SSTP with gold plated connectors on Amazon is only $20.00 USD. The icom cable is over priced. Strait through vs. 568a does not matter. Since the same pins connect on each side. 1-1, 2-2,3-3, 4-4,5-5, 6-6,7-7,8-8. Only matters in the case of a roll over or a 568a - 568b cable (cross over, non standard) Thanks for going over this radio. I just purchased mine yesterday. I am waiting on pins and needles for it to arrive. Going through your entire series now.
Hi Jim, I'm running my IC-7100 through a portable battery rig and the included cable is just so much longer than I need it to be. Since you seem to know much more than I do about these things I'm wondering if a cable like this will work, since it's not a CAT 6e: "Cat6A Shielded (SSTP) Ethernet Network Booted Cable 4 Feet (1.2 Meters) Gigabit LAN Network Cable RJ45 High Speed Patch Cable" Could I use a CAT 8 with the gold connectors? Thank you in advance for any help.
@@travisyoung3455 The cat 6 cable may work. However, the cat 8 has additional shielding. Close proximity to a RF source can induce errors in the system. I experienced this the first go around and in some cases can cause your radio to reboot right in the middle of transmission. So, honestly I would stick to the cat 8. In cat 8 each pair is individually shielded as well as the bundle being shielded, not to mention the additional twists per inch. So, yes, go with cat 8 with the gold shielded connectors.
Thank you VERY much!!! The IC7100 is my dream rig, but the user interface takes a little getting-used-to. I was totally baffled how to get this thing to remember a simple 70cm frequency and PL tone!!! You made it VERY clear!!! You're a great Mentor Tom!!!! 73!!!!!!!! -N3FPZ (John)
PL (Private Line) is a registered trademark of Motorola and CG (Channel Guard) is a registered trademark of GE land moble they both are the same for the generic for CTCSS (CONTINUOUS TONE CODED SQUELCH) which is normally used on the input of most repeaters. CTCSS was and is used to keep noise from keying up repeaters.
Very helpful video! I bought a 7100 because I want a mobile transceiver than can cover HF and VHF/UHF,. I have a 7300, but I've committed that rig to my ever expanding Ham shack. I am impressed by the ease with which 2-m repeaters can be programmed into the 7100. 73 KI5KET
Liked and subscribed. Good stuff. Thanks for putting this together Tom. Very helpful. I attached a cheapo mobile antenna on a pizza pan to my 7100, and was able to hit the local repeater that's ~5 or 6 miles away. I participated in a local net, and had my first conversation with some other ham folks in my area. First time not using my HT or echolink. I've got the local repeater and the NCFs stored.
Very instructive presentation, especially for a beginner in HAM radio. Furthermore your english is thankfully easily understandable even for someone, for whom english is not the native language. Many tnx and congrats!
Yes thank you for this as a extra class ham who suffered a stroke in 2014.I found very helpful since my memory is still cloudy I need all the help I can get I have to relearn every thing, I just received my new radio today my other ones took some kind bug. Thanks again .
I have the IC-7100 and the IC-7300. Lucky for me you are doing all the heavy work for me. I was doing this on my Yaesu FTM-400XDR this morning. ICOM sure has it over Yaesu on ease of using their menus. I think I was able to do this the first time without consulting the manual. I have to grab the manual every time I program in a repeater on my Yaesu because I don't do it enough. The ICOM radios are just intuitive enough to help you through the process most of the time and a similar from radio to radio unlike Yaesu radios are different radio to radio.
Thanks for the comment. I'm glad it was helpful. I have found the Icom manuals to be far better than what you get with some of the Chinese products. However, they are still far from clear for many of the operations.
Great stuff... spent all evening reading the manual on the used 7100 I just received and assembled today. Resetting and starting over was the way to go as well as your explanation of the repeater Tone settings (I didn't have both set). Now I know why I couldn't get into the repeater with this unit or save it to memory. Thanks!
Tom, many thanks for confirming the type of control cable we can use in lieu of the two options provided by ICOM. I couldn't easily find this info elsewhere. I am new to the 7100 and am using it in a base config on a small table so the standard 11.5 ft cable included is way too long for what I need. Looking forward to reviewing the rest of your IC-7100 videos!
Tom, Thank you for this wonderful series. It is very much needed! I love the detailed explanations. Would it be possible for you to do a quick tutorial on how to update the firmware from Icom web site to the IC-7100? Keep up the great work! Thanks again for your service to all of us watching.
No apologies necessary for the length of the video Tom. Your teaching skills are amazing! With some, even a 5 minute video is an ordeal to watch........ not with you though. I'm considering another purchase of an all mode HF/VHF/UHF rig and this one and the FT-991A are in contention. Thanks again for your work and dedication to these videos. 73 de Brent VA3YG
This was good, learning some things that I did not know, I have had this radio for a few months, I have it programed via RT software and a club freq list, but still learning the rig, and have no clue about D Star yet, but looking forward to finding my DV Dongle a new home soon.
Great videos. Actually been thinking of buying one of these to conserve desk space in my present situation and what you are doing, or did, is of great value. Thank you.
Tom, I have only watched a couple of your videos at this point, but you have really nailed the audio quality on your videos. My biggest beef with even some of the well known Tubers is audio quality. Really enjoying the content and strait-forward but we’ll thought out content. Keep up the good work. KO4YML.
Thanks for this video! I made my very first contact the evening after17:27 when I figured out I had my tone entered but didn't have TONE selected! Won't make that mistake again :) Now I gotta watch the rest of your videos (I subscribed earlier today already). Thanks again, 73!
A great series of videos thanks Tom. I chose/purchased a 7100 knowing that your 7300 videos had helped so much. What are the dash mounts shown/used in your vehicle please?
Hi. I'm glad you're finding the videos helpful. Thanks for the kind words. I use RAM mounts for the mobile setup. I have links to some of them on my website here: a-2-z.tech/stuff/. Full disclosure- they are Amazon Associate links. So I get a small commission if you buy something. It doesn't affect your price. There are tons of different options available. Just search "RAM Mounts". P.S. - If you start from one of my links, I'll get credit even if you search for something different and buy it. Thanks! Tom
@@HamRadioA2Z I am happy that you get a commision, if you hadn't mentioned it, I would not have known. I have the 9700, 7300 and the 705 and the 7100 still fits into this line up Tom. It was an indication of where Icom were heading when it was released, but it still can hold "its own" as a shack/portable rig.
I just started watching this series for my 7100. Was that hand mic an optional mic. Mine came with the HM198. Also my control says D-STAR while your control head says DIGITAL when the video had it in your truck.
Hi. Yes, the HM-151 remote control mic is optional. I managed to pick one up used. I find it very helpful for tuning around and changing bands when operating mobile. I'm not sure what digital reference you are referring to. The radio displays DV when it is in DStar mode. I haven't done anything with DStar or any digital HF modes in the videos yet. 73, Tom WA2IVD
Tom - Thank you for this series, it is great. I have a question. At about the 16:00 minute mark of the video, immediately underneath the frequency, your screen shows DUP - . What does that mean or represent. On my screen I have DUP+, but I can't transmit, only receive. How do I change it? Michael
Hi Michael. DUP- means that the radio is in Duplex mode. That is, the transmit frequency is different from the receive frequency. The - means that it will transmit below the receive frequency. The + on yours means it will transmit above the receive frequency. The amount above or below is set by the standard offset. The default on 2 meters is 600khz. On 440mhz the default is 5Mhz. Not sure why you wouldn’t be able to transmit. What frequency was your radio set for? BTW- sorry for the delayed reply. Saw your comment a couple days ago and couldn’t respond just then, then got busy and forgot about it.
Can you please show us how to program a 2 meter repeater that does not show a frequency at the bottom of the display?!? Is that where the A/B button and the Split function come into play?? Thank you!!
Hi. Sorry, but the 7100 does not have that capability. It only has a single receiver and frequency synthesizer section. So it can’t do full duplex or cross band repeat.
Yep. That would have been good. It would have been better if I showed connecting up a ground. In this particular video, I was just using a small mag-mount antenna mounted on a metal plate on my deck. So I didn't bother for this particular example. Good catch.
I HAVE BOTH THOSE RADIOS BUT MY IC-7100 IS STILL IN THE BOX..SINCE I GOT IT NEARLY A YEAR OR MORE AGO.. I HAVE A YAESU -FT-991A THAT SITS ON TOP OF THE IC-7300.THAT ONE IS MY DAILY USCE RADIO..THERE IS NO D-STAR ACTIVITY IN MY AREA......04-06-2020-01:50HRS-E.S.T.......................
Roberto Ellison which rigs are for your daily use, The 991a or both 7300... why? two HFs? I am newbie looking for shack in the box and or mobile+hf..... comment or dstar vs Fusion c4. my considerations for home base primarly are yeasu 991a ic 7100 ic 7300 and Yeasu 7250 thx alex kj7ofm 73
@@acaravajal HELLO ALEX, MY DAILY IS THE 991A WHICH IS SITTING ON TOP MY 7300..I US THE 991A BECAUSE I HAVE YET TO GET MY GENERAL, AND MY DMR / D-STAR ID,S....73 FOR NOW GOTTA RUN.....
Hi Alex. I have found DStar vs. Fusion activity is very local/regional. Some communities are mostly Yaesu, others are mostly DStar. If you live near a large city you may have some of both. If you have a hotspot and have reasonable internet service, you can get on either system whether or not there is a compatible repeater near you. As far as Mobile HF, my opinion is that the IC 7100 is the best choice for that. The control head is already remote, by default. I have also found the large display size and angle works out very well in the vehicle. All of the rigs you are looking at are fine radios. Good luck with whichever one you pick. 73, Tom WA2IVD
I consult the manual as a reference for specific topics but can't tell you how helpful these vids are for learning the fundamentals in a more enjoyable way. Thanks so much for all your work! Great series; just picked up my 7100 today
Thank you for the kind words. Glad you are finding them helpful.
Tom, they never run too long for me. Your time and education of these radios is most valuable 73
Ok. Guess the old days of unpacking the box and intuitively being able to transmit are gone.
Thank you so much for the guidance as this 69yo has no patience for a 300p manual. Will be watching ALL the videos. 73 n6iv
Hi Mark. Thanks for the kind words. You can almost use the 7100 without reading the manual, at least just to transmit and receive on 1 frequency. However, there is so much more that the radio can do if you learn it with tutorials or with the manual.
i just got a 7100. Frankly, this video is easier than the manual. :) I have to do a net control tomorrow, so this is a life saver. I would not want to call the club secretary and say I am out of business. So thanks, I think this video was exactly what I needed.
Yes, the basic manual is redundant and does not evplain enough..
I have a General already-it was much cheaper than a radio. So I just bought an IC-7100, a power supply and waiting on my antenna and cable- really good videos-thanks for your time as a “video Elmer”
Thank you for this. You really don't know how much I appreciate this series. I am a brand new Ham with a brand new IC-7100. I bought the radio because it is an all mode all band radio. After reading through the basic manual and making my way through most of the full manual, then trying to put it into practice I was beginning to think I was way over my head with a radio I had no idea how to use. Looking forward to the rest of the series on this radio. Thanks again. KE8OTX
I love you man. ICOM should be paying you for these videos!
I almost never make comments but you are doing something I've wanted ever since I got my ic-7100 which is my first radio. There are lots of videos on the ic-7300 but nothing comprehensive on the ic-7100 that I've found. I've learned some new, useful things from video #2 and look forward to continuing watching and learning from this series. You are clear, concise and the camera shots are excellent. Subscribed and liked. Keep them coming!
Thank you Amy. I’m glad they’re helpful. I’ll do my best to keep them relevant. I’ll look forward to working you on the air someday. 73, Tom
Excellent video. Just got my technician license and expect to be getting general before too long. Haven't even had a chance to turn my radio on. So glad I found your channel to help me along. Thanks!
The cable is a CAT 6e/7/8 double shielded Ethernet cable. A 15' cable Cat8 SSTP with gold plated connectors on Amazon is only $20.00 USD. The icom cable is over priced. Strait through vs. 568a does not matter. Since the same pins connect on each side. 1-1, 2-2,3-3, 4-4,5-5, 6-6,7-7,8-8. Only matters in the case of a roll over or a 568a - 568b cable (cross over, non standard) Thanks for going over this radio. I just purchased mine yesterday. I am waiting on pins and needles for it to arrive. Going through your entire series now.
Hi Jim, I'm running my IC-7100 through a portable battery rig and the included cable is just so much longer than I need it to be. Since you seem to know much more than I do about these things I'm wondering if a cable like this will work, since it's not a CAT 6e:
"Cat6A Shielded (SSTP) Ethernet Network Booted Cable 4 Feet (1.2 Meters) Gigabit LAN Network Cable RJ45 High Speed Patch Cable"
Could I use a CAT 8 with the gold connectors? Thank you in advance for any help.
@@travisyoung3455 The cat 6 cable may work. However, the cat 8 has additional shielding. Close proximity to a RF source can induce errors in the system. I experienced this the first go around and in some cases can cause your radio to reboot right in the middle of transmission. So, honestly I would stick to the cat 8. In cat 8 each pair is individually shielded as well as the bundle being shielded, not to mention the additional twists per inch. So, yes, go with cat 8 with the gold shielded connectors.
Thank you VERY much!!! The IC7100 is my dream rig, but the user interface takes a little getting-used-to. I was totally baffled how to get this thing to remember a simple 70cm frequency and PL tone!!! You made it VERY clear!!! You're a great Mentor Tom!!!! 73!!!!!!!! -N3FPZ (John)
PL (Private Line) is a registered trademark of Motorola and CG (Channel Guard) is a registered trademark of GE land moble they both are the same for the generic for CTCSS (CONTINUOUS TONE CODED SQUELCH) which is normally used on the input of most repeaters. CTCSS was and is used to keep noise from keying up repeaters.
Very helpful video! I bought a 7100 because I want a mobile transceiver than can cover HF and VHF/UHF,. I have a 7300, but I've committed that rig to my ever expanding Ham shack. I am impressed by the ease with which 2-m repeaters can be programmed into the 7100.
73
KI5KET
Liked and subscribed. Good stuff. Thanks for putting this together Tom. Very helpful. I attached a cheapo mobile antenna on a pizza pan to my 7100, and was able to hit the local repeater that's ~5 or 6 miles away. I participated in a local net, and had my first conversation with some other ham folks in my area. First time not using my HT or echolink. I've got the local repeater and the NCFs stored.
That’s great Rich! I’m glad you’re enjoying the 7100. It’s a big step up from an HT. Hopefully you can get an outside antenna up at some point.
Very instructive presentation, especially for a beginner in HAM radio. Furthermore your english is thankfully easily understandable even for someone, for whom english is not the native language. Many tnx and congrats!
Yes thank you for this as a extra class ham who suffered a stroke in 2014.I found very helpful since my memory is still cloudy I need all the help I can get I have to relearn every thing, I just received my new radio today my other ones took some kind bug. Thanks again .
Hi Ron. Thank you for the kind words. I’m glad you are finding them helpful.
Not sure I’d ever connect anything to the 2M/440 port, but I watch all of this anyway, you have a great talent for presenting.
I have the IC-7100 and the IC-7300. Lucky for me you are doing all the heavy work for me. I was doing this on my Yaesu FTM-400XDR this morning. ICOM sure has it over Yaesu on ease of using their menus. I think I was able to do this the first time without consulting the manual. I have to grab the manual every time I program in a repeater on my Yaesu because I don't do it enough. The ICOM radios are just intuitive enough to help you through the process most of the time and a similar from radio to radio unlike Yaesu radios are different radio to radio.
Thanks for explaining how to load frequencies into the memory. Couldn't work out how to do it from the printed manual.
Thanks for the comment. I'm glad it was helpful. I have found the Icom manuals to be far better than what you get with some of the Chinese products. However, they are still far from clear for many of the operations.
Thank You! Simple, thorough and well done
Excellent tutorial - I'll follows all these when my 7100 arrives at Christmas.
Tom, thanks for putting these videos out. They are such a great resource. 73
Excellent presentation, I cannot wait to get my General License and then purchase this IC-&7100.
Thanks so much for making this video! Already learned a few new tricks such as labeling my repeater with a name! Looking forward to more!
Great stuff... spent all evening reading the manual on the used 7100 I just received and assembled today. Resetting and starting over was the way to go as well as your explanation of the repeater Tone settings (I didn't have both set). Now I know why I couldn't get into the repeater with this unit or save it to memory. Thanks!
Glad it helped!
Outstanding video, thanks ! The series just what I needed !!
This has been a lot of help for me and my ic-7100 as I was trying to figure out how to load my local repeater into the radio .
Tom, many thanks for confirming the type of control cable we can use in lieu of the two options provided by ICOM. I couldn't easily find this info elsewhere. I am new to the 7100 and am using it in a base config on a small table so the standard 11.5 ft cable included is way too long for what I need. Looking forward to reviewing the rest of your IC-7100 videos!
Outstanding video! I love your A-Z series on the 7100 and 7300. Thanks for being a remote Elmer! 73 DE KN6PH
I'm glad you're finding them helpful Paul. Thank you for the kind words.
Tom, Thank you for this wonderful series. It is very much needed! I love the detailed explanations. Would it be possible for you to do a quick tutorial on how to update the firmware from Icom web site to the IC-7100? Keep up the great work! Thanks again for your service to all of us watching.
No apologies necessary for the length of the video Tom. Your teaching skills are amazing! With some, even a 5 minute video is an ordeal to watch........ not with you though. I'm considering another purchase of an all mode HF/VHF/UHF rig and this one and the FT-991A are in contention. Thanks again for your work and dedication to these videos. 73 de Brent VA3YG
Excellent presentation, Tom. Quite informative and helpful.
Enjoying your videos. Well done!
Thanks for these videos. I enjoy them. Great work here Tom!
Larry
de K7HN
Thank you Tom, Very well explained. 73
Very informative, thank you!!
Dude, you nailed it (technician purchase of the IC-7100). Thanks so much for the help!!
KJ7NUX
Glad it helped!
This was good, learning some things that I did not know, I have had this radio for a few months, I have it programed via RT software and a club freq list, but still learning the rig, and have no clue about D Star yet, but looking forward to finding my DV Dongle a new home soon.
Thanks for taking the time to make the videos. Very helpful.
This video has helped me out a lot, I really appreciate you making these videos!
73, K4SWS
Thank you for the kind words. I’m glad it was helpful.
Great videos. Actually been thinking of buying one of these to conserve desk space in my present situation and what you are doing, or did, is of great value. Thank you.
Here in BC (VE7 land) having buttons on the Mic would be called Distracted Driving. Enjoying the videos. 73 va7qu
Tom, thanks these videos are great for us new hams!
Thanks for teaching and sharing with us your knowledge. Greetings from Colombia.
Thanks Eugenio. I'm glad you're finding them helpful.
These are so helpful. Thank you!
Thank you for sharing your time with us . You are doing everyone a great service by being a Elmer to us all. I enjoy your video’s!!! Kc2sto
Much better than the Icom manual.
Tom, I have only watched a couple of your videos at this point, but you have really nailed the audio quality on your videos. My biggest beef with even some of the well known Tubers is audio quality. Really enjoying the content and strait-forward but we’ll thought out content. Keep up the good work. KO4YML.
Excellent instruction Tom. Being in the UK I'd like to add 4M/70Mhz to the band selection so am hoping adding bands are covered in later videos.
Thank you very much. I just bought one of these and the video was very helpful in getting it initially set up.
Great informative video!
Thanks for this video! I made my very first contact the evening after17:27 when I figured out I had my tone entered but didn't have TONE selected! Won't make that mistake again :)
Now I gotta watch the rest of your videos (I subscribed earlier today already). Thanks again, 73!
Glad it helped!
I am catching up on the 7300. Looking forward to the full 7100 series.
nicely done, thank you.
Excellent!!. Thank you for your time to share this video.
Loved it. Great
Thank you very much! 73!
GRATITUDE to you, Mike!
Now I can get started.
73
AJ6EY
Fab video's Tom i have the 7100
Thanks so much, very helpful, keep it coming.KO4KSV
Thanks fro the video!
A great series of videos thanks Tom. I chose/purchased a 7100 knowing that your 7300 videos had helped so much. What are the dash mounts shown/used in your vehicle please?
Hi. I'm glad you're finding the videos helpful. Thanks for the kind words. I use RAM mounts for the mobile setup. I have links to some of them on my website here: a-2-z.tech/stuff/.
Full disclosure- they are Amazon Associate links. So I get a small commission if you buy something. It doesn't affect your price. There are tons of different options available. Just search "RAM Mounts".
P.S. - If you start from one of my links, I'll get credit even if you search for something different and buy it.
Thanks! Tom
@@HamRadioA2Z I am happy that you get a commision, if you hadn't mentioned it, I would not have known. I have the 9700, 7300 and the 705 and the 7100 still fits into this line up Tom. It was an indication of where Icom were heading when it was released, but it still can hold "its own" as a shack/portable rig.
Thanks Tom!!
Great easy to watch video. Well done Tom 73 de KJ7SIS
Thanks for the kind words Dennis.
well done thank you such a neat radio maybe on my christmas list
I just started watching this series for my 7100. Was that hand mic an optional mic. Mine came with the HM198. Also my control says D-STAR while your control head says DIGITAL when the video had it in your truck.
Hi. Yes, the HM-151 remote control mic is optional. I managed to pick one up used. I find it very helpful for tuning around and changing bands when operating mobile. I'm not sure what digital reference you are referring to. The radio displays DV when it is in DStar mode. I haven't done anything with DStar or any digital HF modes in the videos yet. 73, Tom WA2IVD
Tom - Thank you for this series, it is great. I have a question. At about the 16:00 minute mark of the video, immediately underneath the frequency, your screen shows DUP - . What does that mean or represent. On my screen I have DUP+, but I can't transmit, only receive. How do I change it?
Michael
Hi Michael. DUP- means that the radio is in Duplex mode. That is, the transmit frequency is different from the receive frequency. The - means that it will transmit below the receive frequency. The + on yours means it will transmit above the receive frequency. The amount above or below is set by the standard offset. The default on 2 meters is 600khz. On 440mhz the default is 5Mhz. Not sure why you wouldn’t be able to transmit. What frequency was your radio set for? BTW- sorry for the delayed reply. Saw your comment a couple days ago and couldn’t respond just then, then got busy and forgot about it.
Amen
Thanks for the Video . Was not clear in the manual. But it is a lot like the ID-5100a . 73 Mike AJ6GK
Thanks
Welcome
Can you please show us how to program a 2 meter repeater that does not show a frequency at the bottom of the display?!?
Is that where the A/B button and the Split function come into play??
Thank you!!
How do I program in a repeater off set manually for 440.800 MHz ?? I didn't see that in your video. Can you assist.
Thanks KD2WPA
Excellent thank you.. vk3ncr
where did you get that control head cable? I need one.
Hello sir i would like to ask if this radio has a full duplex mode and if it can be crossband repeater. Thanks anyway!
Hi. Sorry, but the 7100 does not have that capability. It only has a single receiver and frequency synthesizer section. So it can’t do full duplex or cross band repeat.
10:41 "All right, so we're connected up, we're plugged in...." What about connecting to ground?
Yep. That would have been good. It would have been better if I showed connecting up a ground. In this particular video, I was just using a small mag-mount antenna mounted on a metal plate on my deck. So I didn't bother for this particular example. Good catch.
thank you! very well done!
Ho Tom How can I contact u for few quiestion abouts the radio?
Hi you can reach me at: tom (at) wa2ivd.com
I HAVE BOTH THOSE RADIOS BUT MY IC-7100 IS STILL IN THE BOX..SINCE I GOT IT NEARLY A YEAR OR MORE AGO.. I HAVE A YAESU -FT-991A THAT SITS ON TOP OF THE IC-7300.THAT ONE IS MY DAILY USCE RADIO..THERE IS NO D-STAR ACTIVITY IN MY AREA......04-06-2020-01:50HRS-E.S.T.......................
Roberto Ellison which rigs are for your daily use, The 991a or both 7300... why? two HFs?
I am newbie looking for shack in the box and or mobile+hf..... comment or dstar vs Fusion c4.
my considerations for home base primarly are
yeasu 991a
ic 7100
ic 7300 and Yeasu 7250
thx
alex kj7ofm
73
@@acaravajal HELLO ALEX, MY DAILY IS THE 991A WHICH IS SITTING ON TOP MY 7300..I US THE 991A BECAUSE I HAVE YET TO GET MY GENERAL, AND MY DMR / D-STAR ID,S....73 FOR NOW GOTTA RUN.....
Hi Alex. I have found DStar vs. Fusion activity is very local/regional. Some communities are mostly Yaesu, others are mostly DStar. If you live near a large city you may have some of both. If you have a hotspot and have reasonable internet service, you can get on either system whether or not there is a compatible repeater near you.
As far as Mobile HF, my opinion is that the IC 7100 is the best choice for that. The control head is already remote, by default. I have also found the large display size and angle works out very well in the vehicle. All of the rigs you are looking at are fine radios. Good luck with whichever one you pick.
73, Tom WA2IVD
Some time stamps would be lovely .. I had to skip ahead a lot
Yeah, sorry about that. I have been adding those in more recent videos.
Thank you for posting these. I just got one. Big help! K1DTC