Colour Fastness to Water test ISO 105-E01

I explain about this test :---
1. Specimen size(40 ± 2) mm × (100 ± 2) and Multifiber size (40 ± 2) mm × (100 ± 2)
2. Stitch the specimen with multifiber on face side
3. Specimen Immerse in water for 30 min.
4. Take water 50:1 times (in original weight of the specimen )
5. Mount the specimen perspiration tester and weight apply (12,5 ± 0,9) kPa With acrylic plate (No. of Acrylic plate11)
6. Heat the loaded specimen in oven at (37 ± 2) °C. for 4 h.
7. Remove the specimen in perspiration tester and drying separate specimen and multifiber for over night after that assessment.
Note :--- I am explaining this test
I have explained as much as I know if there is any error please comment.
you have any question regarding this test plz comment.
BELOW LINK PROVIDED FOR TEST
Please Subscribe and Share my channel
My Email: -- [e-mail]
ASTM D3512 RTP PILLING TEST
• PILLING TEST ASTM D3512
FABRIC WEIGHT ASTM D3776 Option -C (GSM)
• FABRIC WEIGHT ASTM D37...
Tensile Strength ASTM D5034
• Tensile Strength ASTM ...

[@gauravdhar5482]

Is it distilled to be immersed or any clear water like tap water..?

[@AjayakumarNair-q6u]

Voice is not clear sir

[@rrmtextile2318]

I will try better in the next time

[@Joabsb]

Iso 105 E11?

[@Deepaksharma-tu8op]

Voice nahi hai

[@rrmtextile2318]

next videos