Sony XM-GS4 Amplifier RMS Power Testing - 4 Channel Amplifier
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Sony XM-GS4 4 Channel Amplifier exceeded ALL power testing expectations!!!
Purchase from Amazon (Paid Link): amzn.to/3yiDnfH
Purchase from Us: www.qualitymob...
Amplifier Installation Kits
www.qualitymob...
Visit www.QualityMobi... for all of your car audio and video needs!
#ampdyno #amplifiertesting #xmgs4
Subscribe to QMV Fast Tech for 12 Volt Tips: / @qmvfasttech
Get your QMV Merch today!
teespring.com/...
Instagram: @qualitymobilevideo
Twitter: @qualitymobilevi
Facebook: / qualitymobilevideocom-...
I have GS4 and GS100 and these things never fails to impress me. I used to run this amp in bridged mode (2-channel mode) with the final impedance of speaker drivers at 2 ohms and it plays flawlessly for long musical sessions, but then I noticed the amp getting really hot to touch. Then i switched to 4 ohm drivers, now the amp does not heat much and i don't notice much difference in audio quality. I have paired the GS100 with two 12inch subs with final impedance at 2ohm and it is a class D beast. No matter which car the amps go into, they are made to rock your ride.
Excellent amplifiers, impressive for the price!
Can you do the same for Sony gs 100 mono amp too?
I am planning to buy xm-gs4. Still this is a good purchase in 2024 any other equivalent amplifier can be considered within same budget
my experience with Sony and ES lines of amplifiers are superb quality at a great price as well. Something you don’t find very much these days …keep on rocking.
Yes, they are great product!
WOW. Really great amplifier, in definitely going to buy this! 💸
Good choice!
@@Qualitymobilevideo @Quality Mobile Video Hey! You guys made a video about the Sony XS-GS1631C I am about to purchase a pair of them this week, but I would like to do an active setup. Did Sony give you RMS power for each driver? I know the Midbass 6.5” is 65watts RMS but there is no data for the midrange or the tweeter 😭😭 can you help please!? 🙏
I've always wonder why ppl bash Sony stuff. They make some nice stuff.
They sound really good, underestimates for sure!
Does this amplifier deliver the same rms in 4 channel driven and 2 channel driven mode ?
It’s rated at 160x2 at 4 ohms and 70x4 at 4 ohms.
Damn. Soild amp.
Can you please review the JBL Club A5055 ?
Does acoustic characteristics of low pass mode differ between xm gs100 class d and xm G4 Class AB?
I feel so.. XM G4 gives low frequency resonance like below 40 hz and xm gs100 resonance peaking at 48 to 55 hz..
Hello.. I have N1004 amp powering 2 Audison prima components (100W rms) and 2 Audison coaxial speakers (70W rms), both 4 ohm impedance. Unfortunately my speakers are getting tripped every half an hour with high wheezing noise.. although the speakers come to life once I turn off the ignition and restart it.. what might be the issue? Is N1004 amp under powered or there is a head unit problem? I own a xuv 500 w6 car with stock head unit. Thanking in anticipation..
I really hate to say this, take it back to who installed this. If you did it yourself. I'll gladly troubleshoot your system over the phone but like a plumber I start at $125 an hour. Dm me
Is this better than morel MPD 4.100
Ok serious question is posible to wire 12 speakers (8) mids (4) tweeters @2 ohm and use a taramps md1800 not a 4 channel amp?
Здравствуйте.Этот усилитель с вентилятором?У меня есть похожий усилитель.Но с небольшими отличиями...И без верхней крышки...Не могу нигде в Ю-Тюбе найти свой не усилитель....Но у меня вентилятор стоит на той ширине,но ровно по центру.И две платы так-же рассположенны,но только по 2 переключателя на фильтрах.
which is better this or gs n1004 , since both are 4 channels,Thank you
Pretty dope amp.
Is it stable at 2 ohm bridge?
What’s the efficiency percentage ?
Does it work at 24volts stable DC supply ?
Absolutely not, max 15 volts
Can I use this amp for 3 way component?
If you want run full active, buy 2 and run each in 3ch mode. Otherwise 1 will work
Yup nice one
good video, I have bought the same amplifier when I turn on the fan is not spinning is only start spinning when it’s over heat or something wrong with the amplifier please help
Is Audio qulity based on amplifier or head unit?
Mostly the amplifier and your speakers/subwoofers will determine the sound as well as the EQ and audio settings from the headunit if you use them. The headunit really just supplies the signal. A lot of things can affect the quality, like types of cables used, connections.
@@Qualitymobilevideo Hey could you please clarify if the rms delivered would be the same in 4 channel driven mode?Video shows only 2 channel driven test results. Thanks
@@Qualitymobilevideo 👩🌾👩🌾??
Does it have dsp?
No
Sony still don't learn to place the Remote lead between + and - leads...damn this is so stupid if you want 4/6 awg cables so much less space for isolation of the cables
Do this amplifier fan always run or when it gets hot?
Only when it gets too hot, like fans are supposed to.
I'm not paying $250 for Spade connector Sony no thank you.
The SMD AMM-1 readings do not add up and make sense?
At 1khz you state 19.17volts thats 92rms not 72rms
You also claim 19.14amperage draw with 2 channels hooked meaning for the claimed 72rms reading of the AMM-1 to be true the amp would need to be as inefficient as %52 which is wicked low.
Going back to the table of 19.17 volts being 92rms then the 19.14 amperage is more believable as it would put the amp at %66.5 efficiency
Same goes for your results with 40hz sinewave you state 19.08volts which is 91rms not 76rms as claimed with the Amm1 and at 18.42 amp draw the efficiency would have to be %57 for the amm1 to be correct which again doesnt sound right whereas if we take it as 91rms it would be %68 which does sound right
Lumy look ok
hp 8903b looks ok
Gs4 looks ok
Amm1 = speaking out of his ass :)
Yea that's why we show so many other readings, clearly the AMM-1 isn't as well calibrated
What firmware is your AMM-1 on? It may need updating.
$250?!?! You must be on Crack, my AD has these at $130...I know cuz I bought my father 2 of them
Who is that?
You are simply wrong, and looking at the wrong product. This is 400 amp, that can be had for around 250. It is not a 130 though.
This amp is powering my Sony Mobile ES speakers and the sound quality is so clean and crisp. I love my Sony Mobile ES speakers and DM GS4 amplifier.
how do you have the speakers set up? passive or active? im warming up to this amp with your speakers. want to run them active though..
larry
@mafosa8519 what did you end up doing im in the same situation with the Sony ES speakers and the GS4 amplifier
Waiting for its since last year.... even requested many times...
I don’t think anything beats this at the same price point. I am highly impressed with Sony. This is close to JL low and mid tier amps in performance and clean power. This amp blows away kicker CX and similar amps at the same price point.
It sounds great!
I have been roaring this amp with my two 12s for almost 3 years now! Outstanding longevity.
I am using these two amp in bridge mode n only taking 95w RMS ,so that its can pump out purest signal of 0.05% THD.
can you explain your audio setup?
@@SanthiratanMandyam
I AM using TOPPING BC3 bluethooth at LDAC to take Optical signal out for Topping E30 DAC.. takes analog to feed Helix DSPmini to Drive out two sony GS4 amps used in bridge to drive Front component of morel virtue 602 and rear Alpine R type.
One Rockford T1500 to drive Rockford P3 D4. Subwoofer gain ser at 400w only.
The quality of sound is at par.
@@SanthiratanMandyam once sony ES series headunit will available in india , i will remove topping hook up that ES unit in the car.
I have used JVC 960... it has wireless Android auto n apple carplay, but output of that head unit was very very bad.
@@Somesh-Ji cool, do you stream music from Android phone through Bluetooth? Any specific audio apps you use?
@@SanthiratanMandyam Yes from Apple Music n Tidal both, but Tidal has very limited collection so 80% times its apple music and good thing is now apple music also provides losses.
Would you guys be able to test the Sony XM-GS6DSP?
Brother sony 600 watt ,sony 500 e ,sony 1004w or sony gs 100 ?? Which amp is best
I have only left and right line level output from head unit but 4 speakers, can I still use this?
Yes, two channel input and four channels out, select two channel input on the amp.
Nice👌
Great specs, but why didn't Sony use better terminals instead of ones from the 90's??
Look at other 70w x 4 rms amps with higher than 90db signal to noise at 1 watt, they are mostly in the $500 range.
@@vipercrazy9910 and... I run Alpine PDX. Didn't pay as much as you're stating, but if you're going to go by one spec, it blows it away in S/N and power making it worth the extra. However, signal to noise isn't the main factor and really shouldn't be used as a big determining factor in amplifier purchase. Nobody listens in the 1 watt range.
I just ordered one of these today for a $198 on amazon.. I also have the gs100.. Trying to sell the gs100. Didnt realize it was only a 2 channel.
What if your rh terminals don’t work when wiring into the woofer but your L does work ??? @ 3:15
Class D ....?
Class AB
I'm a Sony guy in the car, home Sony, Sony ALL time everything in stereo from T.V. and camcorder ❤🕶
👌
I using this to run my 4 tweeters exclusively.
👑
Thank you!
what class is this amp.. they don't provide that information
AB
Pinten regine
mine has a bit of a clipping sound from speakers when going beyond rated 70 watt @ 16.7 volts so i would suggest to not go beyond 17 volts or 16.7 volts @ 4 ohm if u want to listen clean
That’s a issue with installation or tuning of the amp. It is not the amp itself.
Bro can u tell me how iys fan works
Can someone let me know if it can run 4 door + 4 tweeters + 1 central speaker + 1 subwoofer?
I own a kia seltos and it has 4 door + 2 front tweeters stock... stock speakers are pretty nice but they lack stereo sound
Totally possible, depends on your amplifier
@@Qualitymobilevideo will sony xm-gs4/q or Sony xm n-1004 work?