Im glad you did this test . Ib been into car audio for 30yrs back in 1994 i hooked up 2 rockford fosgate 18" single voice coil 4 ohms .in a 10cubes box sealed on a kenwood 1021 kdc amp in bridged was 1000watts i wired the subs in parallel. An this amp puts out the same power @ 2 ohms . Funny today i could use this amp on my 15" crossfire c-7 v-3 1600 rms sub an it would do just fine in a 4 cubes box ported an tuned to 32hz . Thank for posting. Id just put my jp minni. On my mids.
I watched this review and was going to buy this amp on the marketplace..come to find out it was steromojo that I was buying it from..but this amp for the price is amazing..I have it hookup up to 2 deaf bonce machetes 2400 watts each wire done to 1 ohm and it is amazing...I don't really see myself needing anything more powerful
@@boogersandsnot1How is it still performing...I need to power 2x 10'' skar @ 1ohm...its this or the Recoil RED1200-1 2500...which was recomended on reddit car/av for a good budget amp
I think there should be a Blaupunkt Theorem. where Amp manufactures unnecessarily over inflate their amp rating when if they would just have given it its true rating or even under rated it, they would have not only sold more but would have gained a good reputation in the process, so it's regulated to Chinese junk even though price per watt and overall build quality it actually might be one of the best.
You blew it lol i got the andeman 4 channel Friday and it good, not sure what power it puts out yet, waiting on your review, but its good for what am doing. I have a problem though, the power supply 😑
My wild guess on how they rate their rating is by doing math on the capacitor, resistor Ect Ect. By the looks they absolutely don’t dyno run the amps. Moreover nice job on the videos especially on this cheap strong amp. Is there a way I can strap or linked up 2 of this? Or how to hook up 2 of these one for each sub.
Pretty decent amp for the money. Really good protection circuit. The only thing I would have liked to see is some silicone on the chokes for vibration protection and rated as 1.5k amp.
@StereoMoJo- I go by the 10 watts per dollar ratio, to determine if the amp is a budget banger. This amp costing around $125 x 10 watts, so i was hoping it would do 1,250 watts R.M.S. So to see 1,600 R.M.S., and 1,800 burst, is really good for the $= this is a budget banger IMO! Plus anyone buying this amp should never wire below 1ohm, and so when playing music= with impedance rise, this amp will probably never go over 150 Amps of current draw!?
Does that thing have a Hall effect current sensor over that wire going across the board. If so that would be the first time I’ve ever seen that. Maybe for the protection circuit?
#blauPUNKD is what it should be called nowadays 😆 I rmbr in the mid 90s they were real popular and I felt like they were looked at how Focal is looked it today
I'm wondering what the black ring is on the red output wire. I've never seen that before. Maybe an inductive clamp to measure output amperage? Maybe just a ferrite ring to reduce output noise? Anyone know?
I was wondering the same thing. Maybe why it went into protect so quick at .8 ohm. If that’s an inductive current probe then I’d be interested to see exactly how they’re using it.
I paid $599 for a PPI PC275. Rated at 300w rms at 4ohms. This 5000d is much more powerful and for the money it is a steal. Doubt it has the quality of the ppi though.
@@stereomojo yeah I heard it’s mostly a lie or they do some crazy stuff to it during testing that nights show that power for a short period. Overall looking at the size of some of these amps it would seem like it has a bunch of stuff in there that would actually allow it . I mean I know little of nothing what I’m looking at in side of a amp thigh either 😂.still makes me wonder if it can be modded or something just to mess around with it and see if it gets more power
Sometimes, you can tell by the price if it's true wattage and some amps are over-priced, and you're just paying for a brand. These amps are trash. Looks can be deceiving, especially on this amp.
Should’ve called it AMP1500 and they would sell a ton at $99 bucks.
you said it best.
Im glad you did this test . Ib been into car audio for 30yrs back in 1994 i hooked up 2 rockford fosgate 18" single voice coil 4 ohms .in a 10cubes box sealed on a kenwood 1021 kdc amp in bridged was 1000watts i wired the subs in parallel. An this amp puts out the same power @ 2 ohms . Funny today i could use this amp on my 15" crossfire c-7 v-3 1600 rms sub an it would do just fine in a 4 cubes box ported an tuned to 32hz . Thank for posting. Id just put my jp minni. On my mids.
That’s awesome! You had a nice system back then! Thanks for the support!
I have the $49.99 4K version on an American Bass XFL 15 probably giving it about 700 watts. It’s awesome honestly
Yeah, they’re actually pretty good for the money
Burning up at last part was the best thing 😂😂😂
That was actually a different amp. Stay tuned to the channel. Thanks!
Been interested in this amp for a while now.. can't wait to see what she does.
Not too shabby for the price.
I watched this review and was going to buy this amp on the marketplace..come to find out it was steromojo that I was buying it from..but this amp for the price is amazing..I have it hookup up to 2 deaf bonce machetes 2400 watts each wire done to 1 ohm and it is amazing...I don't really see myself needing anything more powerful
@@boogersandsnot1How is it still performing...I need to power 2x 10'' skar @ 1ohm...its this or the Recoil RED1200-1 2500...which was recomended on reddit car/av for a good budget amp
It's actually not bad for the price. It gets over 1800rms watts for under $130 👍
I agree!
I like the business card you have for the info at the end,lol.
Thanks a bunch! I’m gonna start doing that with each one. If I can remember, I’ll try to always do it on camera.
Good job guys.
Oh WoW ! what a Cliffhanger !
Lol, any idea what amp that was?
Pretty good for the buck doesn't get too hot either
Nice for the price
that's a great buy
I think the brand has changed something in the last 5 months but I don't know if it's an improvement
I think it’ll be cool if you made some videos of testing subwoofers at their power ratings
Yeah, I would enjoy doing that!
I think there should be a Blaupunkt Theorem. where Amp manufactures unnecessarily over inflate their amp rating when if they would just have given it its true rating or even under rated it, they would have not only sold more but would have gained a good reputation in the process, so it's regulated to Chinese junk even though price per watt and overall build quality it actually might be one of the best.
You blew it lol i got the andeman 4 channel Friday and it good, not sure what power it puts out yet, waiting on your review, but its good for what am doing. I have a problem though, the power supply 😑
It wasn’t the Blaupunkt that blew at the end of the video. It was a top secret amp. Lol
@@stereomojo lol i saw someone say it was a cliffhanger
Nemisis audio amp nobody has done it yet
Thanks!
I say the same thing. I have a 6k nemesis, and I haven't seen one done. I've been waiting to see one.
My wild guess on how they rate their rating is by doing math on the capacitor, resistor Ect Ect. By the looks they absolutely don’t dyno run the amps. Moreover nice job on the videos especially on this cheap strong amp. Is there a way I can strap or linked up 2 of this? Or how to hook up 2 of these one for each sub.
Pretty decent amp for the money. Really good protection circuit. The only thing I would have liked to see is some silicone on the chokes for vibration protection and rated as 1.5k amp.
It’s hard to disagree with that. Thanks!
@StereoMoJo- I go by the 10 watts per dollar ratio, to determine if the amp is a budget banger. This amp costing around $125 x 10 watts, so i was hoping it would do 1,250 watts R.M.S. So to see 1,600 R.M.S., and 1,800 burst, is really good for the $= this is a budget banger IMO! Plus anyone buying this amp should never wire below 1ohm, and so when playing music= with impedance rise, this amp will probably never go over 150 Amps of current draw!?
Thanks Evil. I agree!
looks like the planet audio 5,000 and that put out 1,500 as well
Does that thing have a Hall effect current sensor over that wire going across the board. If so that would be the first time I’ve ever seen that. Maybe for the protection circuit?
That’s what it looks like. Pretty cool
@@stereomojoyep it’s on the speaker output. Protects the amp when it senses overcurrent. Probably over 40A
#blauPUNKD is what it should be called nowadays 😆 I rmbr in the mid 90s they were real popular and I felt like they were looked at how Focal is looked it today
Omg they still make car audio? Last time I bought anything from Blaupunkt was a 12” sub from Caldor in 1996
Omg! Caldor! I haven't thought about that in years, lol good times.
I'm wondering what the black ring is on the red output wire. I've never seen that before.
Maybe an inductive clamp to measure output amperage?
Maybe just a ferrite ring to reduce output noise?
Anyone know?
I noticed that too. Idk what it is, but pretty cool to see.
I was wondering the same thing. Maybe why it went into protect so quick at .8 ohm. If that’s an inductive current probe then I’d be interested to see exactly how they’re using it.
Oh you said the same thing at 19:40
Stable @ 2 ohms probaly means its best to run at 2 ohms perhaps...the Recoil RED1200-1 2500 amp says stable down to 1ohm....
not bad for the price. So what did you do to make it hit 2082 watts and burn up?
That was actually a different amp. The Blaupunkt is still alive and well.
Yeah man my cousin have 1 on 2'15s it hits low notes without base knob
The bass knob has nothing to do with power output.
Nothing below 1 ohm ive seen the amp videos on the dyno of this amp they should call it a 1500.1 d and they would sell alot more .
I paid $599 for a PPI PC275. Rated at 300w rms at 4ohms. This 5000d is much more powerful and for the money it is a steal. Doubt it has the quality of the ppi though.
Yeah, the value these days can be crazy good! What year was that PPI that you had?
im a little confused if you drew 216amps through 160amp worth of fuses why didnt they blow?
They can handle a bit more power for a short period of time.
Omfg there rms slo blo fuses smfh it's easy to look shit up n probably get the correct answer
Roughly 8 cents per watt is a hard bang for the buck to beat.
I can’t argue with that! Thanks!
HOW DID U BLOW IT @ THE END OF VIDEO. GREAT REVIEW
It was a trick! That wasn’t the same amp. lol
@@stereomojo OK. THANKS. GREAT REVIEW
@@tnastycuzz4031 thanks Cuzz! Lol
looks like a ocean audio 1200.1
Hmmm, that’s interesting.
@@stereomojo I've been checking Alibaba and they are all there 🤣
Maybe they mean strapped?
Where do they get 5000 watt rating has it never done 5000 .. or is ut all a lie
It’s got to just be a lie. It won’t do it dynamically or go below 1 ohm, so the 5k doesn’t make any sense at all.
@@stereomojo yeah I heard it’s mostly a lie or they do some crazy stuff to it during testing that nights show that power for a short period. Overall looking at the size of some of these amps it would seem like it has a bunch of stuff in there that would actually allow it . I mean I know little of nothing what I’m looking at in side of a amp thigh either 😂.still makes me wonder if it can be modded or something just to mess around with it and see if it gets more power
Hi are you still teaching MATH?
Teaching math?
I was totally disrespectful and said 800 total!!! Boy was I wrong 😂
It puts out decent numbers for the money!
😂😂😂😂😂😂😂😂😂😂funny moment
@@jorgerccarupgraderodriguez5720 lol, which part?
Can this amplifier be strapped? Maybe that's where they got their RMS rating from 🤔🤫😂
isnt every amp 2 ohm stable tho lol
Yes, lol. I don’t understand why they put that on there.
Sometimes, you can tell by the price if it's true wattage and some amps are over-priced, and you're just paying for a brand. These amps are trash. Looks can be deceiving, especially on this amp.
Lame....as expected.