Alfa Laval MIB 303S 13/33 Oil Separator, Alfa Laval mib 303s 13, Alfa Laval mib 503/ mmb 304s-11

Alfa Laval MIB 303S 13/33 Oil Separator, Alfa Laval mib 303s 13 , Alfa Laval mib 503, Alfa Laval mmb 304s-11
Application
The MIB 303 separation system is designed for centrifugal
separation of sludge and water from mineral oil.
The separator is designed for oils with a maximum density of
920 kg/m3 at 15°C. The maximum separation temperature
for gas oil and marine diesel oil is +40°C, and for lubricating
oil +70°C, since this is the max. separation temperature for
the separator.
Mineral oil
The MIB 303 separator in a cleaning system for distillate and
marine diesel oil should be operated as a purifier. For cleaning
of lubricating oil, MIB 303 purifier or clarifier can be used.
Concept
The MIB 303 separator features a special design concept
for solid-bowl separators. Advanced manufacturing, design
and drive technologies have contributed to a separator
more compact and lightweight than conventional solid-bowl
models.
Features
• No lock ring. Requires only small mechanical force on
opening/assembling of the bowl.
• The design allows the bowl wall to be taken out and
cleaned with the disc stack still in place.
• Lightweight materials in bowl and discs.
• Direct drive with motor speed controlled by a frequency
converter eliminates gears or belts.
• Requires no lubrication.
• The cleaned oil is discharged under pressure, due to the
built-in paring disc pump.
• Frequency converter with built-in voltage protector.
Benefits
• Easy to install, operate and maintain. No special training
required.
• Small dimensions allow installation in narrow spaces.
• Removal of solid impurities extends intervals between filter
replacements, which saves filter costs and reduces filter
disposal handling.
• Removal of water from mineral oil improves the reliability
of the oil system. It also reduces the risk of bacterial growth
in tanks that could clog the filters.
• Electronics protected from voltage variations.
Throughput capacity
The MIB 303 separator has a throughput capacity of max.
760 litres per hour of diesel/gas oil and max. 460 litres per
hour of steam turbine lube oil.
Standard equipment
Separator with drive, funnel for water supply with connections
and starter for both separator and feed pump.
Ancillary equipment
Necessary for operation are: feed pump, collecting tank with
water seal alarm, strainer, valves and fittings.
Available models
The MIB 303 separator is available as a purifier or a clarifier
in stand-alone and module versions. There is also a choice
between 230 V AC and 110 V AC. In the module version the
ancillary equipment mentioned above is built together with the
separator to form a compact unit.
Power consumption
700 W ±10%.
Weight of module
68 kg.
Purifier operation
Separation takes place in the
rotating solid-wall bowl. The
uncleaned oil is fed into the bowl
where the centrifugal force makes
water and solid particles move out
towards the periphery of the bowl,
while the clean oil flows inwards.
To establish a water seal during
start-up of the separator, water is
added to the bowl before the oil feed
is started. The water collects in the
water seal which drains into the
water channel below the bowl.
The solids accumulate on the bowl
wall and are removed periodically
by hand.
The cleaned oil flows towards the
centre of the bowl and up to the
paring disc. Since the oil is rotating,
the stationary paring disc acts as
a pump which forces the oil out
through the outlet under pressure.
Clarifier operation
In clarifier mode the oil normally
does not contain any free water.
The separation principle is similar to
that of the purifier, although there is
no water seal and no water outlet
in the bowl and the water handling
capacity is limited.
Technical documentation
Complete information and documentation is provided in the instruction
book accompanying each MIB 303
separator.
After sales support
Replacement part kits for preventive
maintenance at one and two years
intervals are available.
DELIVERY & FREIGHT:
· Completely Recondition Unit is delivered with Electric panel, Set of Tools and Gravity disc, Set of O-ring, Anti Vibration Mountings.
· With best track with freight forwarding company we can deliver Recondition Centrifuge to any parts of world at best comparative rates.
SELLER:
Machine Marine |Machine Marine Centrifuge | Machine Marine Separator
OFFERED UNIT: fully reconditioned & tested.
WARRANTY: Supplied with 6 month Warranty.
CONTACT DETAILS:
Mr. Mohammad Raza Ravjani
Machine Marine Centrifuge
Alang Ship Braking Yard, Bhavnagar, Gujarat, India,
TEL: [phone]
EMAIL: [e-mail],
[e-mail],
WEBSITE: www.machinemarine.com
www.machinemarinecentrifuge.com
www.machinemarineseparator.com