Black Decker - AST 1 disassembling and KR500RE repairing / Rastavljanje i popravka
ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2024
- I buyed KR500RE drill with broken gear wheel. After that, I buyed another model with compatible gear wheel and put on my drill. This is entertainment video, if you do not know what are you doing please leave the job to profesionals.
Kupio sam KR500RE bušilicu sa pokvarenim zupčanikom. Nakon toga kupio sam još jedan model sa kompatibilnim zupčanikom i ubacio svoju bušilicu. Ovo je zabavni video, ako ne znate šta radite, prepustite posao profesionalcima.
Pretty nice drill.
I use it (besides others form bigger brands) for simple tasks. Works pretty fine for like 15 years now.
Did the same as you: disassembly, clean, grease and re-assembly. Just swapped the cables.
So you Vid helped me a lot for assembly it the right way. thanks :D
Thank you! Old drill but if you use properly - may last long :)
My 25 years
Perfect
Hello. I have the same drill, I took it apart for cleaning, but I couldn't figure out how to replace the pin in the impact part. can you help me. Thanks.
Oh, sorry, I made this video a long time ago and forgot some details about parts inside :(
Ciao mi è stato regalato lo stesso trapano , ho un problema perché ho trovato 2 fili scollegati, il filo marrone senza faston e il filo rosso che non capisco in quale contatto del pulsante va collegato , puoi aiutarmi con uno schema? ..grazie in anticipo
Hi, thank you for watching. You can try to find some schematics on www.sparepartsworld.co.uk it has so many schematics. Be free to comment of you need more help.
@@MilekaRobot grazie , ho guardato ma non ho trovato uno schema elettrico che indica la posizione del filo rosso e del filo marrone ....basterebbe trovare qualche foto di un possessore dello stesso trapano che può indicare le posizioni..
Hi, I have a KR500RE whose diode in reverse direction pcb its burn. ¿ Could you tell me what it is ? Thanks
Hi, thanks for commenting. Diode usually get burned due to high current, if that was your question? Burned diode means that tool is under some high "pressure", during drilling or some of mechanism problem inside drill. This is my point of view, maybe I am not right but...
Mayron ba kayung uli ng black decker KR500CRE
Ulo
where's the reverse button?
On the top of drill, moves "up/down" , another switch moves "left/right" for hammer/drill option.
Como ligar interruptor a bobina
The worst drill I have ever had, from Black & Decker. The drill is ruined, and it is new. It has no agent or spare parts. I put it in the garbage pail because it deserves it... The factory was closed because the product was bad.
Yes, I agree, after some use I can say that it is not very good quality.
@@MilekaRobot Unfortunately, I tried to find an agent for it or spare parts, but I did not find any. Also, the technician refuses to repair it because there are no spare parts. The drill is a failure in the full sense of the word
Majstore ,sto si ti tu na kraju POPRAVIO ???
Hvala na komentaru. Na KR500RE prvi zupčanik do futera je bio totalno "zblajzan", nisam mogao na prvoj bušilici da skinem futer pa sam komplet sa tim zupčanikom stavio u KR500RE. Da, ne sećam se tačno, ali na prvoj je probio rotor ili stator, tako da je bila sa te strane neupotrebljiva pa sam iskoristio zamenjeni deo sa nje.
@@MilekaRobot ok,ali to se sve ne vidi,Video ti je nekoristan .Sorry!
@@marin7115 Poštujem svako mišljenje. Ruku na srce, mogao sam mnogo bolje uraditi video, on je među prvim koje sam uradio, još sam i eksperimentisao sa tim komentarisanjem i snimanjem ekrana i nije ispalo baš najbolje, ali šta je - tu je ;)
eska motor kha milega
Mere pass wali kharab h
Maybe you should start by learning English!
Thank you for watching. Yeah, you are right, my english in this video is so bad. Usually I speak during the video recording, this was some experiment with commenting the video after recording. I will practice more english speaking :)
@@MilekaRobot Sorry, I was a bit too brusque! Success with your study of English!