It'll be great for charging the Switch on the go in general. I hate how the current switch has to be lying flat when charging in handheld. Made long trainrides (or similar) way less enjoyable.
You definitely seem right, I'm guessing there will be some kind of pins that will slot in ant then they retract when you press the release button. As you can see the release buttons on the back of the joy cons.
@@youssefbencheikh8637exactly! I can’t even play without it pausing every minute because of them disconnecting. The only problem on the switch 2 could be the things inside bending.
@@youssefbencheikh8637yeah I had to get new joycons as mine just kept disconnecting and going off by themselves Good excuse to get better colors for em
Anyone who's ever had a chance to play around with Rare Earth Magnets wouldn't be questioning how well the new JoyCons will be staying in place. That rubberization inside the console slots is not just an esthetic choice, it's to absorb the impact of how forcefully the magnets pull each other to lock those things in place. Plus, with Rare Earth Magnetization locking, the pull will never wear out over time like a physical locking mechanism would.
3:55 - As a fellow tech guy... I though the exact same thing. Like why add a protrusion that can easily be bent AND be exposed to the elements. Atleast with the Switch 1, the contacts where flat.
Before making contact with the connector the joycon is already inside the slot so I think that will hold it in place so it shouldn't be able to bend or break from plugging them in.
@@mardy3732 It's always possible to accidentally insert the joy-con at a degree to hit the tab at an angle, or drop the switch2 onto the corner of something
The connector will be fine. It's recessed, aligns with magnets, and looks like it might even have a little bit of a hinge under the surface to account for misalignment. But I don't think we're gonna be getting multiple colours with this one. Case in point being that the system itself has the JoyCon colours on the inside of the trench. The accent colour seems to be more for quick recognition of which is the left and right JoyCon at a glance. If they sold (for example) purple and yellow JoyCons, then you'd be matching a purple controller with a red connector, and it'd start getting visually muddled. So I think they might be easing back the multi coloured aspect of the system this time. If I had to guess, they might've seen diminishing returns on the various JoyCon recolours' sales figures over time. So this time around they're just sticking to the one colour config. Maybe? I dunno. If you're reading this far, you're just as crazy as I am.
Nooooo they definitely made a ton of money selling different color combinations for the joycons, it's such an easy way to refresh the look of your console without having to buy 3rd party shells or skins. I think the reason they've pulled back on colors is to match the sleek and modern look that a lot of other handhelds currently have. Lowkey I think that's a mistake, this new redesign looks really boring especially as far as nintendo products are concerned
@@Andy_0017 They want this product to sell to as many people as possible... not just hardcore Nintendo fans. Im sure you thought the N64 and Gamecube were cool and quirky, but most people thought they were dumb and kiddy. Nintendo knows what they're doing.
@@beelzemobabbity i mean the only real way they could break it is if they stuck their fingers in the rail and pulled on the connector, which is probably metal
There’s a trigger button for removing the new controllers so there shouldn’t be any issues with that part as long as people don’t force it off with out clicking the trigger button
If you dropped the switch without the joycons in and something like a corner of a table hits inside the joycon slot I can totally see that thin connector bending or breaking
Or, if you tried to catch your switch 2 by the controller, it could just keep falling. Seems risky for kids, and people who struggle with holding onto things(I'm not too bad anymore, but I still drop things occasionally)
My biggest concern is the joysticks. part of the reason the old ones got drift was because the lip of the thumb stick was way too high letting dirt and stuff get in, and if you look at the switch 2 1:03 (you might need to go frame by frame, its the < and > keys) it has the same high lip, so theoretically it will have thew same issue. the joysticks also just look small again.
I hope for (our and there) sake that is resolved. There is chance that they'll use hall effect joysticks instead which would solve the drifting issue, so this may have been counteracted someway just below the lip with some protection? I'm saying this because drift was such an issue to the point they issued free repairs to anyone effected, and no company wants to issue free repairs, so it'd likely be fixed
it's weird cause it's not quite the same? i think the stick itself is slightly thicker and the lip seems to be more well hidden, only popping up when you tilt the stick fully one direction
Yeah it’s so weird people reacted to the first new feature to show up first. Personally I was popping off about the new Mariokart the second the switch 1 showed up.
I mean, it looks like there's a lip on the upper and lower ends of the connector port on the Switch 2, so it might not be a sudden case of the snappening on launch day. Rather, it might be because of wear and tear over time, due to habits.
@@LUN4RA they said at first glance, which they are right, i had to check someon's reaction ( not this one) before realising it was a new one because of the route66 track, then i watched an analysis and yeah it is very different but at first glance it's hard to notice lol
Who tf would freak out about Mario kart. Is it something new? Is it supposed to be any big difference at all from the last few? Was it worth even showing some small footage for in this trailer? The answer to all is no
Why is everybody so worried about it looking gray and boring, the original switch also released with a completely gray model and I think this looks way better than that. Plus there's probably going to be a colored one as well. Edit: look at the original Switch reveal trailer. They only showed the gray model, it even shows multiple systems at once and none of them are the red/blue model. So I’m really not worried at all that this is the only model.
With how much Nintendo likes releasing "exclusive versions" of consoles for certain games, we'll have so many colors of joycon we'll be begging them to stop
@@Cubinginatreethe locking mechanism is a small plastic piece that wears out quite easily. I replaced mine with metal ones and it never happened again
In the leak, there’s like a magnet switch as a locking mechanism so it’s not going to be as fragile as you thought (in the same place as the current one)
I just want to put this here for those who might not realize. From what I’ve seen in leaks (take with a grain of salt) the connection of the controllers are magnets. Now how strong these magnets are time can only tell. I just couldn’t tell if pointcrow knew this or not when talking about the joycon connections.
In 0:55 we can see indents at the bottom of the colored part of the controller, which could mean the magnets are only there to hold the controller in place so a mechanical lock can be engaged.
Excuse me what? Your comment says four minutes ago but your reply to your own comment says five minutes ago. You replied to your comment before you made the original comment.
@@LukeBurdick-cb7xm yes, and? is being goated a crime? (in all seriousness, yt doesn't update comment timings. It's likely that you loaded my reply later.)
Listen, before we judge it, they didn’t even give us a single detail of any feature on the console. They casually shadow drop Mario Kart 9 AND THE switch 2 at the same time on a THURSDAY AT 5:30 AM PACIFIC TIME. It’s going to be cool I bet on it. But we don’t even know what the heck that C button does! NOTHING is explained. But I guess we’ll just have to see in the future.
3:38 I wouldn't be worried about the locking mechanism, there still being an unlock button on the back tells me they should be on pretty well. Either the button will somehow weaken the magnet allowing the user to take them off, or the magnets *won't* be super strong and there'll be some second more secure locking mechanism that the button deactivates But I agree about the connector, at least 100 people are gonna break shit within the first week
backwards incompatible games are the ones that use the ir sensor or need the exact size of the first device, like labo or the wheel, in order to play. it's no big deal.
That makes no sense at all. April 2 is a presentation. You can have a presentation before the start of the new fiscal year, it has no effect on taxes. It’s a presentation. If the presentation was in February, that means they would have been ready to release it in April. The presentation being in April, the launch is probably around June.
My immediate thought with this trailer was that those connector tabs were going to get shattered to f*** I'm so glad that everyone else sees the same problem.
About the Joycons. You missed something during the cgi morphing of them into the new ones. At the top and bottom are Latch Hooks. Probably an unseen Release for those on the cons or the System itself, but they'll lock the Cons into place, and the Physical Circuit will provide a better connection for Charging the Joycons. An example: my nephew has a switch, and it stopped registering when the left con was attached to the system completely... So we had to buy an external Joycon charging thing(NOT ACTUALLY A LICENSED PRODUCT) so he could continue playing. That won't happen here. Instead, they'll attached in a way akin to a Game boy Cartridge... Could the Attachment break? Probably. But you would have to be pretty rough with it to do so. Plus not having to slide on means no more Faulty latch, making the cons disconnect mid-game and detach, resulting in the Switch falling to the ground while you are standing outside, waiting on a school bus(for example), and shattering the screen.(my other nephew. Poor kid.) It's an improvement. And possibly a step back, technologically, but if it ain't broke, don't fix it...
The new joycons attach magnetically; there aren't any latches in the slots on the side of the Switch 2. The latch hooks are for the new straps where you can see the latches, and the straps themselves have a button for releasing the latch.
@iamc24 first: THERE ARE NO MAGNETIC CONNECTORS ANYWHERE . Solid plastic. Magnetic connectors are VISIBLE. second: The latch hook things for the Strap makes sense... Except they are at both ends. Third: they attach via Metal Circuit Plug, much like a Hard drive on an Xbox one or certain PCs. The tiny latches Are likely to hook BOTH the Wrist strap, AND latch the Cons into the System. That is an exposed Circuit used for connection. A magnet would fry that connector. Finally: that's likely an LCD, or OLED, screen, rather than a simple LED... Both of which are EXTREMELY succeptible to magnet damage. Ever sat a magnet next to a TV? Bad idea. How about a video game console? Game card? Magnets can damage all three. Putting in enough magnetic screening to put magnetic attachments on this would drive the price up significantly, meaning it would cost somewhere in the PS5 Pro/Apple I-Phone Range, Which Nintendo has stated they WILL NOT do. Does it Click in via these 4 little latches? Maybe, Maybe Not. But there is not a single glimpse of a magnetic connector. So unless the entire Shell is made of magnetized metal, magnets are unlikely. That was just a Rumor from an unsubstantiated Leak.
@ The magnet issue with electronics has been solved for a while now. Nowadays, they only really affect the parts that use magnets to function, like speakers, cameras, compasses, and hard drives. LCD and OLED aren't susceptible to magnets; that's just wrong. The only displays that magnets affect are CRTs. Also, no modern form of memory or storage (that isn't a hard drive) is susceptible to magnets. And basically all modern circuitry is shielded against magnetic interference. Obviously a strong enough magnet can still cause interference in any piece of electronics, but it would need to be an industrial strength magnet, if not even more powerful than that. No consumer product would have or even need a magnet that strong. As for magnetic connectors not being visible, they really don't need to be. The magnet in my laptop can hold two old plastic gift cards in between it and something else metal without any slipping, and it isn't really all that strong. Stronger magnets than that would be used for the Joycon attachment, and it would be absolutely fine, even if there were layers of plastic between. And that's not even considering the fact that there could be magnets in both the Joycons and the Switch 2, instead of just on one side of the connection. Finally, in the promotional animation on their website, you can see that the Joycon release trigger pushes out a circular part of the top of the inside of the Joycon connection. That would be for breaking the magnetic connection enough to be able to pull out the Joycon. If Joycons did connect with latches on the Switch 2 side, the release mechanism would be very different. And again, I'll repeat: THERE ARE NO LATCHES IN THE SLOTS ON THE SIDES OF THE SWITCH 2, YOU CAN SEE THAT THERE AREN'T.
I like the point you make here, but I am a bit concerned about how we would hold this thing. Imagine if you were playing the handheld switch 2, and you somehow pull it apart, and the screen falls to the ground. I think it would have been better if we plugged the controllers into the console, rather than plugging the console into the controllers.
4:43 the black model isn’t the only one. We already know of a model where all of the black is replaced with white, and there’s also a Mario kart 9 model (and another 2 more maybe that we don’t know anything about
I’m personally concerned about the coloring on the sides of the console itself. What if I get one model but then have to replace the Joy-Cons? If I don’t get the same color ones, it’ll be frustratingly mismatched
I’m not a fan of how only the part beneath the joysticks are colored. Just looks out of place at that point; there should either be a bit more or none at all
4:10 It’s magnetically held, and there’s a notch that keeps it in. There’s a trigger on the back of the joycon that releases the notch. The connector is probably going to be fine, it shouldn’t have any stress on it.
Didn't even see the notice that some games won't be compatible. If I had to guess - it is games that use the ir sensor on the base of the right joycon, because they moved it. This would be 1,2 switch, nintendo Labo, Warioware - a short list
Not necessary 18+ things, I think he is referring to, uh, multiplayer when 'tendo didn't intend multiplayer. But I might be wrong, perhaps it is indeed lewd.
At first I was also worried about the new controller design, but as I've thought about it it's probably better. The weakpoint of the og rails was upwards, if too much force was applied (or you damaged it by not using the button) they could fall out. The weakpoint of the new design it outwards, and you don't often have significant force in that direction. It's also magnetic, so it can't wear out (unless the connector is damaged, I hope Nintendo did enough testing on that)
based on the leaks, the connectors to the joy2cons have a latch in the back at the same time as the magnets also yea i want some cooler joycons but the highlights are neat
Most cursed thing ive seen so far regarding the new system is someone saying "They changed the sound of the switch's iconic "click" and now it just sounds like a "plap"
I have just watched the original Switch reveal trailer and when it comes to colours, they did the same thing. It was just grey joycons throughout the netire reveal, so I think Nintendo will have more colours options on day one, just like they did with OG Switch.
i just noticed 0:00 right at the start, when the switch turns into the switch 2 see that little dot on the bottom of the switch (slightly left) its the light sensor it lets you automatically adjust the brightness and its not on the switch 2 by the looks of things
This is definitely a second Switch. Besides Mario Kart 9 stuff I don’t really have any more thoughts than that until April (or leaks give even more details before April).
3:55 the CURRENT joycon connecting method is prone to failing, i have 2 OLED switches that dont like to keep joycons on and makes it almost impossible to play in handheld mode.
I am worried about the snapping controllers, but as someone with a switch whose locking mechanism is broken, I kind of miss being able to hold my switch upright by holding the controllers !
I'm fine with the more or less minimalistic external design language they've gone with. What I DO WANT from Switch 2 is a return to a more fun, inviting, colourful and whimsical user interface. Quirky gimmicks in the UI was always what made a Nintendo FEEL like a Nintendo when I was a kid, so I'd love if they'd recapture some of that with Switch 2!
yeah don't care about the external look. I won't be taping my console to a wall and staring at it. I love unique and cool ui designs like playstation did for the 50th anniversary hope the UI is not bland.
3:56 they’re held in with magnets, the knobs on the back physically pull the magnets apart to make it easier. This is good because kids tend to yank the joy cons off without unlocking them, which on switch 1 would break things, but on switch 2 it won’t it’ll just be harder, and it’s going to break anything it’ll be your hand (and if that happens I feel like that’s your own fault)
The original switch came with a grey version in its reveal trailer before showing us the neon ones i have no reason to think they wouldnt do colorful ones
finally seeing someone with the same concern about the controllers only being held by magnets. Kids especially i feel are gonna be pulling it apart and it falling out and breaking the screen
how does everyone miss the fact the switch2 HAS TWO USB C PORT NOT JUST ONE, making it more versatile on how you charge it instead of being weird angled to charge it undocked.
The protruding connector for the joy con is rubber. Bendable shouldn't be nearly as easy to brake. Joycons are held in place using electromagnet, which should have a very strong connection and be less prone to breaking than the rails of the first Switch.
That notch on that connects to the joycons is apparently a magnet, so there's no need to be forceful with it you would just gently move the magnetic receptors towards eachother and the magnet would do all the placing for you. I feel like if you break a magnetic piece of hardware like that it's your own fault for introducing kinetic force to a magnetic force where it is unnecessary.
when it flicks to the back you can see buttons on the back of the joycons, so maybe they have the same lock buttons but just use magnets instead of a rail
1:07 according to leakers so it might not be true, but the joy cons are supposed to be Hall effect so it is impossible. If not, at least way less likely for them to get drift. Again, I could be wrong and I’ll eat it if I am.
If you look at the end of the colored section of the joy-con at around 00:48, there seems to be an indent, most likely for the snap-in snap-out connection. At 01:34, you can see the back triggers, including a new secondary trigger on both joy-cons. On the bottom, next to the joycons, there seem to be small buttons on the main body of the console, possibly for separating the joy-cons? Watching it again, at 00:32 it shows what i thought was a "button" is actually the foot for tabletop mode! So no idea how the separation works.
Japan always releasing their big news on April 1st for the new quarter: "Why does the West keep thinking we're joking?"
And then there's Google Japan just doing April fool's whenever they want
I think April 1 is the start of Japan's tax season, so it makes sense that that's when most companies have major news and reveals.
The school years end in March and start in April, too.
@@dudeguy1894 How does this have 40 likes you just repeated what the OP said about the fiscal year while also ruining the joke 💀
@@kcekjmthe OP didn’t imply they knew that tax season was the reason. Also didn’t ruin the joke for me, I felt it was informative
He might get collectors anxiety again...
Perfect comment
Collector anxiety ptsd
he will never escape it. It’s inevitable
The ptsd
Not a question, but a fact
"can press buttons, that's great" 💀
Well, if you have controllers, being able to press buttons is a helpful bonus feature
@@Maxwell4Smash trueee
@@budyngamer5243 I heard compressed buttons.
@PLOB_edits i clearly hear pause between "can press"
@budyngamer5243 I hear both lol.
"they got intimate with the sounds" lmfao
It’s so true though 😭😭
Having two charging ports is going to be great for gaming in bed
It'll be great for charging the Switch on the go in general. I hate how the current switch has to be lying flat when charging in handheld. Made long trainrides (or similar) way less enjoyable.
yeah, he seemed to have missed that 2-port detail
Also I'd you want you can hopefully use them for mouse and keyboard or just keyboard with the joycons as mouse
0:55 you can see indents on the sides of the insert which will be where/how the joycons are locked into the console
You definitely seem right, I'm guessing there will be some kind of pins that will slot in ant then they retract when you press the release button. As you can see the release buttons on the back of the joy cons.
Waaay better than the rails on the switch, mine broke and now the joycons keep sliding and disconnecting whenever they want
@@youssefbencheikh8637exactly! I can’t even play without it pausing every minute because of them disconnecting. The only problem on the switch 2 could be the things inside bending.
@@youssefbencheikh8637yeah I had to get new joycons as mine just kept disconnecting and going off by themselves
Good excuse to get better colors for em
Anyone who's ever had a chance to play around with Rare Earth Magnets wouldn't be questioning how well the new JoyCons will be staying in place. That rubberization inside the console slots is not just an esthetic choice, it's to absorb the impact of how forcefully the magnets pull each other to lock those things in place. Plus, with Rare Earth Magnetization locking, the pull will never wear out over time like a physical locking mechanism would.
3:55 - As a fellow tech guy... I though the exact same thing. Like why add a protrusion that can easily be bent AND be exposed to the elements. Atleast with the Switch 1, the contacts where flat.
Mechanical engineer, I felt exactly the same way. The moment I saw those I was worried.
@@Ren_Daemonica as an industrial designer I also felt the same way. I saw them and had a panic attack
Before making contact with the connector the joycon is already inside the slot so I think that will hold it in place so it shouldn't be able to bend or break from plugging them in.
so you think they wouldn't know that? obviously they. have some sort of way to prevent this
@@mardy3732 It's always possible to accidentally insert the joy-con at a degree to hit the tab at an angle, or drop the switch2 onto the corner of something
"Switch tuah switch on that thing" is wild dawg even worst on 2025 😭
I couldn’t believe he said it
"Nintendon that thing" is right there.
painfully unfunny, gives strong "hello fellow kids" vibes
@ fr
I’m really hating those jokes. People won’t stop using it and it’s getting SO annoying
The connector will be fine. It's recessed, aligns with magnets, and looks like it might even have a little bit of a hinge under the surface to account for misalignment. But I don't think we're gonna be getting multiple colours with this one. Case in point being that the system itself has the JoyCon colours on the inside of the trench. The accent colour seems to be more for quick recognition of which is the left and right JoyCon at a glance. If they sold (for example) purple and yellow JoyCons, then you'd be matching a purple controller with a red connector, and it'd start getting visually muddled. So I think they might be easing back the multi coloured aspect of the system this time.
If I had to guess, they might've seen diminishing returns on the various JoyCon recolours' sales figures over time. So this time around they're just sticking to the one colour config. Maybe? I dunno. If you're reading this far, you're just as crazy as I am.
Nah
Nooooo they definitely made a ton of money selling different color combinations for the joycons, it's such an easy way to refresh the look of your console without having to buy 3rd party shells or skins. I think the reason they've pulled back on colors is to match the sleek and modern look that a lot of other handhelds currently have. Lowkey I think that's a mistake, this new redesign looks really boring especially as far as nintendo products are concerned
@@Andy_0017 They want this product to sell to as many people as possible... not just hardcore Nintendo fans.
Im sure you thought the N64 and Gamecube were cool and quirky, but most people thought they were dumb and kiddy.
Nintendo knows what they're doing.
If youre a responsible person yes. But who is one of the biggest markets of nintendo? Children
@@beelzemobabbity i mean the only real way they could break it is if they stuck their fingers in the rail and pulled on the connector, which is probably metal
There’s a trigger button for removing the new controllers so there shouldn’t be any issues with that part as long as people don’t force it off with out clicking the trigger button
it'll be much harder to force out in comparison to the OG switch, since you can't knock it incorrectly and absolutely ruin it
If you dropped the switch without the joycons in and something like a corner of a table hits inside the joycon slot I can totally see that thin connector bending or breaking
@@DeathClawz agreed, I'm keeping my oled switch and not getting the switch 2, i hope the switch 2 games are compatible
@@dk4kja8what do you not understand about "nintendo switch 2 exclusive games"?
Or, if you tried to catch your switch 2 by the controller, it could just keep falling. Seems risky for kids, and people who struggle with holding onto things(I'm not too bad anymore, but I still drop things occasionally)
My biggest concern is the joysticks. part of the reason the old ones got drift was because the lip of the thumb stick was way too high letting dirt and stuff get in, and if you look at the switch 2 1:03 (you might need to go frame by frame, its the < and > keys) it has the same high lip, so theoretically it will have thew same issue. the joysticks also just look small again.
I hope for (our and there) sake that is resolved. There is chance that they'll use hall effect joysticks instead which would solve the drifting issue, so this may have been counteracted someway just below the lip with some protection? I'm saying this because drift was such an issue to the point they issued free repairs to anyone effected, and no company wants to issue free repairs, so it'd likely be fixed
it's weird cause it's not quite the same? i think the stick itself is slightly thicker and the lip seems to be more well hidden, only popping up when you tilt the stick fully one direction
I love how the first thing literally everyone says is "oh, it's bigger" lol
Yeah it’s so weird people reacted to the first new feature to show up first. Personally I was popping off about the new Mariokart the second the switch 1 showed up.
That’s the first thing they showed, do you want them to talk about the new Mario Kart they didn’t show at the beginning
Can't wait for the compilations of people breaking these dainty connectors when they instinctively try to pull out their joycons like they used to.
I'm pretty sure they're magnets, not connectors/connection pins
Magnets.
I mean, it looks like there's a lip on the upper and lower ends of the connector port on the Switch 2, so it might not be a sudden case of the snappening on launch day.
Rather, it might be because of wear and tear over time, due to habits.
It’s magnetized that’s the clicking noise
You obviously can't do that
I find it funny that instead of freaking out at the Mario Kart reveal he was just dancing.
To be fair, it doesn't look like a new mario kart game at all at first glance. Graphics-wise, anyway, it looks exactly like MK8 to me.
@@reptarien 24 players. Now you can feel really bad for losing
@@reptarien it has a new artstyle tho, it looks more cartoonish, kinda Mario Bros Wonder style, and the karts are entirely different
@@LUN4RA they said at first glance, which they are right, i had to check someon's reaction ( not this one) before realising it was a new one because of the route66 track, then i watched an analysis and yeah it is very different but at first glance it's hard to notice lol
Who tf would freak out about Mario kart. Is it something new? Is it supposed to be any big difference at all from the last few? Was it worth even showing some small footage for in this trailer? The answer to all is no
Why is everybody so worried about it looking gray and boring, the original switch also released with a completely gray model and I think this looks way better than that. Plus there's probably going to be a colored one as well.
Edit: look at the original Switch reveal trailer. They only showed the gray model, it even shows multiple systems at once and none of them are the red/blue model. So I’m really not worried at all that this is the only model.
Bring! Back! Transparent plastic!
I have a grey switch lite and was planning on upgrading to switch 2 without knowing how it will look. So this is a good looking one for me
It's almost like they forgot how many Colored joycons exist after the initial release.
It's a none problem.
With how much Nintendo likes releasing "exclusive versions" of consoles for certain games, we'll have so many colors of joycon we'll be begging them to stop
I think its more like there's 'some' colour so that makes it seem like this is what they think the colours should be from now on
I didn't flip out, but I'm EXTREMELY happy
we better be getting more backgrounds than just black and white this time
Dark mode is vastly preferred
3:45 my locking mechanism broke so I hope that this new system will work
you have to press the button on the back while pulling up the joycons
@ That is what I did untill the mechanism broke and the can just slide out now.
Mine too! Happened years ago but it still bothers me to this day!
@@Cubinginatreethe locking mechanism is a small plastic piece that wears out quite easily. I replaced mine with metal ones and it never happened again
@@benney9074 Oh good to know. Do you have a link to any good ones?
2:43 i said the EXACT same thing WORD FOR WORD wtf 💀
bro had no reaction to mario kart 9 💀
Meh, Mario Kart 8 deluxe with all the dlc is more than good enough for me, I haven't even learned the current tracks yet.
Eh Mario Kart 8 is already good enough for me. 👍
Fr 24 players is gonna be nuts
Why get excited? It's gonna be the same thing as Mario kart 8 with some additions.
i dont care much for mario kart
In the leak, there’s like a magnet switch as a locking mechanism so it’s not going to be as fragile as you thought (in the same place as the current one)
I just want to put this here for those who might not realize. From what I’ve seen in leaks (take with a grain of salt) the connection of the controllers are magnets. Now how strong these magnets are time can only tell. I just couldn’t tell if pointcrow knew this or not when talking about the joycon connections.
it seems like there are multiple points of connection, since there are trigger buttons to remove the controllers
@ I believe from what I’ve heard is that the trigger pulls the magnets in the controller away from the switch
It’ll be way sturdier
In 0:55 we can see indents at the bottom of the colored part of the controller, which could mean the magnets are only there to hold the controller in place so a mechanical lock can be engaged.
"can press, buttons, that's great" got me 😂😂
My reaction: yo that's kinda cool
thought you guys might wanna know
Excuse me what?
Your comment says four minutes ago but your reply to your own comment says five minutes ago. You replied to your comment before you made the original comment.
@@S41L0RThanks bro, have been waiting for your opinion :)
@@LukeBurdick-cb7xm yes, and? is being goated a crime?
(in all seriousness, yt doesn't update comment timings. It's likely that you loaded my reply later.)
@@S41L0R🗣️
the video was so chill, i loved it
Listen, before we judge it, they didn’t even give us a single detail of any feature on the console. They casually shadow drop Mario Kart 9 AND THE switch 2 at the same time on a THURSDAY AT 5:30 AM PACIFIC TIME. It’s going to be cool I bet on it. But we don’t even know what the heck that C button does! NOTHING is explained. But I guess we’ll just have to see in the future.
oh no not the hawk tuah reference at the end
hawk tuah was the second best meme of 2024
@theguidefromfortnite definitely one of the worst*
Compared to Skibidi toilet, it's tolerable@@OvOPlant
@theguidefromfortnite the hawk tuah meme is still massive
3:38 I wouldn't be worried about the locking mechanism, there still being an unlock button on the back tells me they should be on pretty well. Either the button will somehow weaken the magnet allowing the user to take them off, or the magnets *won't* be super strong and there'll be some second more secure locking mechanism that the button deactivates
But I agree about the connector, at least 100 people are gonna break shit within the first week
backwards incompatible games are the ones that use the ir sensor or need the exact size of the first device, like labo or the wheel, in order to play. it's no big deal.
Not the “intimate with the sounds” 😂😂😂
PointCrow looks like Andy Sandberg’s long lost brother.
1:29 This specific bit reminds me of the intro of Jazzpunk
I hope they have some more interesting flavors for the cartridges this time
April second is be cause of their fiscal year that starts April first.
They can't do shit before that because it's too soon to do taxes on it.
That makes no sense at all. April 2 is a presentation. You can have a presentation before the start of the new fiscal year, it has no effect on taxes. It’s a presentation.
If the presentation was in February, that means they would have been ready to release it in April.
The presentation being in April, the launch is probably around June.
My immediate thought with this trailer was that those connector tabs were going to get shattered to f*** I'm so glad that everyone else sees the same problem.
I can’t wait to get this and tear it apart and make the casing all titanium. Fck I’m salivating. Also there’s is a locking mechanism.
About the Joycons. You missed something during the cgi morphing of them into the new ones.
At the top and bottom are Latch Hooks. Probably an unseen Release for those on the cons or the System itself, but they'll lock the Cons into place, and the Physical Circuit will provide a better connection for Charging the Joycons.
An example: my nephew has a switch, and it stopped registering when the left con was attached to the system completely... So we had to buy an external Joycon charging thing(NOT ACTUALLY A LICENSED PRODUCT) so he could continue playing.
That won't happen here. Instead, they'll attached in a way akin to a Game boy Cartridge... Could the Attachment break? Probably. But you would have to be pretty rough with it to do so.
Plus not having to slide on means no more Faulty latch, making the cons disconnect mid-game and detach, resulting in the Switch falling to the ground while you are standing outside, waiting on a school bus(for example), and shattering the screen.(my other nephew. Poor kid.)
It's an improvement. And possibly a step back, technologically, but if it ain't broke, don't fix it...
The new joycons attach magnetically; there aren't any latches in the slots on the side of the Switch 2. The latch hooks are for the new straps where you can see the latches, and the straps themselves have a button for releasing the latch.
@iamc24 first: THERE ARE NO MAGNETIC CONNECTORS ANYWHERE . Solid plastic. Magnetic connectors are VISIBLE.
second: The latch hook things for the Strap makes sense... Except they are at both ends.
Third: they attach via Metal Circuit Plug, much like a Hard drive on an Xbox one or certain PCs. The tiny latches Are likely to hook BOTH the Wrist strap, AND latch the Cons into the System. That is an exposed Circuit used for connection. A magnet would fry that connector.
Finally: that's likely an LCD, or OLED, screen, rather than a simple LED... Both of which are EXTREMELY succeptible to magnet damage. Ever sat a magnet next to a TV? Bad idea. How about a video game console? Game card? Magnets can damage all three. Putting in enough magnetic screening to put magnetic attachments on this would drive the price up significantly, meaning it would cost somewhere in the PS5 Pro/Apple I-Phone Range, Which Nintendo has stated they WILL NOT do.
Does it Click in via these 4 little latches? Maybe, Maybe Not.
But there is not a single glimpse of a magnetic connector. So unless the entire Shell is made of magnetized metal, magnets are unlikely.
That was just a Rumor from an unsubstantiated Leak.
@ The magnet issue with electronics has been solved for a while now. Nowadays, they only really affect the parts that use magnets to function, like speakers, cameras, compasses, and hard drives. LCD and OLED aren't susceptible to magnets; that's just wrong. The only displays that magnets affect are CRTs. Also, no modern form of memory or storage (that isn't a hard drive) is susceptible to magnets. And basically all modern circuitry is shielded against magnetic interference. Obviously a strong enough magnet can still cause interference in any piece of electronics, but it would need to be an industrial strength magnet, if not even more powerful than that. No consumer product would have or even need a magnet that strong.
As for magnetic connectors not being visible, they really don't need to be. The magnet in my laptop can hold two old plastic gift cards in between it and something else metal without any slipping, and it isn't really all that strong. Stronger magnets than that would be used for the Joycon attachment, and it would be absolutely fine, even if there were layers of plastic between. And that's not even considering the fact that there could be magnets in both the Joycons and the Switch 2, instead of just on one side of the connection.
Finally, in the promotional animation on their website, you can see that the Joycon release trigger pushes out a circular part of the top of the inside of the Joycon connection. That would be for breaking the magnetic connection enough to be able to pull out the Joycon. If Joycons did connect with latches on the Switch 2 side, the release mechanism would be very different. And again, I'll repeat: THERE ARE NO LATCHES IN THE SLOTS ON THE SIDES OF THE SWITCH 2, YOU CAN SEE THAT THERE AREN'T.
I like the point you make here, but I am a bit concerned about how we would hold this thing. Imagine if you were playing the handheld switch 2, and you somehow pull it apart, and the screen falls to the ground. I think it would have been better if we plugged the controllers into the console, rather than plugging the console into the controllers.
that sucks for your nephew. My connector rail broke and I can't play in handheld mode anymore, but I can at least charge the joycon when locked in...
4:43 the black model isn’t the only one. We already know of a model where all of the black is replaced with white, and there’s also a Mario kart 9 model (and another 2 more maybe that we don’t know anything about
It's not black. It's grey, charcoal grey.
@ it has been stated time and time again by people who have seen it that it’s matt black. And we already know that internally it’s known as “black”
2:45 *EXACTLY* what I was thinking.
They *actually* did it cus its the switch 2, also the reason the video is 2:22
Idk why his is 2:21 but mine and a lot of peoples in the comments of the releses, is 2:22
Autism day lmao.
Why didn't they make it 2/2/2025...
Matter of a fact, they should've released the switch 2 on 2/22/2022
@@Gidd_playz yea that would be cooler but thats not enough time to make it
3:20 "...Switch that I use for.... other things...."
*Nintendo breathing down his neck*
The slap sound when connecting the controllers is so satisfying
I’m personally concerned about the coloring on the sides of the console itself. What if I get one model but then have to replace the Joy-Cons? If I don’t get the same color ones, it’ll be frustratingly mismatched
“Switch Utah, switch on that thang”
3:00 THANK-YOU!
You have to press a button to release the joycons
I’m so glad someone else pointed out the joy cons
"Hands on events? Not for me"
Cant wait for "I GOT TOO PLAY THE SWITCH 2 EARLY" by Pointcrow
While they may seem potentially flimsy, the sleek black is a nice change from the neon ones from last time in my opinion
I’m not a fan of how only the part beneath the joysticks are colored. Just looks out of place at that point; there should either be a bit more or none at all
@@A_Professional_Idiot_mk.2 they shouldve done some color to the buttons
@@A_Professional_Idiot_mk.2theyre obviously gonna come up with more colors.
@@A_Professional_Idiot_mk.2 I like the colors personally. Has a sort of "rgb joystick" look. Also helps to distinguish left and right joycons.
@@bagel221 Yeah the buttons being colored would be nice.
4:10
It’s magnetically held, and there’s a notch that keeps it in. There’s a trigger on the back of the joycon that releases the notch.
The connector is probably going to be fine, it shouldn’t have any stress on it.
Wow, they can press buttons? That’s next-level interaction right there!
someone going to brreak the controller snap on thingy I guarantee it
Didn't even see the notice that some games won't be compatible. If I had to guess - it is games that use the ir sensor on the base of the right joycon, because they moved it. This would be 1,2 switch, nintendo Labo, Warioware - a short list
That connector seems much easier to replace, so I’m not super worried about it
I had the same thoughts about April 2nd LMAO
if they make it like a flat contacts like a magnet pads not as scary like that pointy and will break, is suuuper scary
They might have also chosen april 2nd because its switch 2. The reveal trailer is 2:22 after all
feb 2nd would have been a better release date in this case
@gonpachi_0303 truuuu
It's more than likely because they didn't want people thinking it wasn't an April fools joke
No, 4=2x2 so there's two twos
switch tuah 🗣️🔥🔥
I think a spring-based cushion that covers the exposed Joy-Con connectors when detached would've been ideal.
istg when i showed my mom the switch 2 trailer she also immediately said "its bigger!"
'Switch Tuah, lets Switch on that thing' 💀
3:22 so we're all just gunna glaze over this...... no no no eric please explain yourself
edit: pointcrow? more like freakycrow
Not necessary 18+ things, I think he is referring to, uh, multiplayer when 'tendo didn't intend multiplayer.
But I might be wrong, perhaps it is indeed lewd.
@ ik I’m just jokin
At first I was also worried about the new controller design, but as I've thought about it it's probably better. The weakpoint of the og rails was upwards, if too much force was applied (or you damaged it by not using the button) they could fall out. The weakpoint of the new design it outwards, and you don't often have significant force in that direction. It's also magnetic, so it can't wear out (unless the connector is damaged, I hope Nintendo did enough testing on that)
based on the leaks, the connectors to the joy2cons have a latch in the back at the same time as the magnets
also yea i want some cooler joycons but the highlights are neat
They should colour the buttons
Most cursed thing ive seen so far regarding the new system is someone saying
"They changed the sound of the switch's iconic "click" and now it just sounds like a "plap"
The connectors attach to the controllers magnetically and click into place so you have to use a button on the back to slide it off of the console
I have just watched the original Switch reveal trailer and when it comes to colours, they did the same thing. It was just grey joycons throughout the netire reveal, so I think Nintendo will have more colours options on day one, just like they did with OG Switch.
people who got a nintendo switch on christmas watching the trailer of switch 2:
I was just looking for this!
now time to make PointCrow reacts to PointCrow reacts to the Switch 2 trailer
Btw the Joycons still lock into place (probably by magnets), there’s that button on the back that detaches it
i just noticed
0:00
right at the start, when the switch turns into the switch 2
see that little dot on the bottom of the switch (slightly left)
its the light sensor
it lets you automatically adjust the brightness
and its not on the switch 2 by the looks of things
This is definitely a second Switch. Besides Mario Kart 9 stuff I don’t really have any more thoughts than that until April (or leaks give even more details before April).
im also scared about the connectors
Stupidest design for joycons if you consider that kids would handle this and break that connector the second they get their hands on it.
Doesn't that apply to any controller/device when it stems from kids being reckless?
@@hideofreakingkojima5457 yeah
The reaction was impeccable
3:55 the CURRENT joycon connecting method is prone to failing, i have 2 OLED switches that dont like to keep joycons on and makes it almost impossible to play in handheld mode.
I am worried about the snapping controllers, but as someone with a switch whose locking mechanism is broken, I kind of miss being able to hold my switch upright by holding the controllers !
Pointcrow needs to watch this
I'm fine with the more or less minimalistic external design language they've gone with. What I DO WANT from Switch 2 is a return to a more fun, inviting, colourful and whimsical user interface. Quirky gimmicks in the UI was always what made a Nintendo FEEL like a Nintendo when I was a kid, so I'd love if they'd recapture some of that with Switch 2!
yeah don't care about the external look. I won't be taping my console to a wall and staring at it. I love unique and cool ui designs like playstation did for the 50th anniversary hope the UI is not bland.
No, it does lock and there are buttons on the back like the old joycons so that you could take it off whenever
3:56 they’re held in with magnets, the knobs on the back physically pull the magnets apart to make it easier. This is good because kids tend to yank the joy cons off without unlocking them, which on switch 1 would break things, but on switch 2 it won’t it’ll just be harder, and it’s going to break anything it’ll be your hand (and if that happens I feel like that’s your own fault)
Someone mentioned that was Kalamari desert in the chat. It does resemble it actually…
Theres a switch on the back of the joycon so it detaches if you press it. Its not going to be holding on by a thread the whole time.
i assume the joycons would have a locking mechanism like for the switch 1 where you have to push a button to slide them out.
Yes, I has two buttons like triggers to release the joycons from the console and grip.
with the rounded edges and all, i’m worried this will be ridiculously uncomfortable and difficult to hold
“It better be better”
That ain’t the switch… that’s the snap
The original switch came with a grey version in its reveal trailer before showing us the neon ones i have no reason to think they wouldnt do colorful ones
finally seeing someone with the same concern about the controllers only being held by magnets. Kids especially i feel are gonna be pulling it apart and it falling out and breaking the screen
how does everyone miss the fact the switch2 HAS TWO USB C PORT NOT JUST ONE, making it more versatile on how you charge it instead of being weird angled to charge it undocked.
The protruding connector for the joy con is rubber. Bendable shouldn't be nearly as easy to brake. Joycons are held in place using electromagnet, which should have a very strong connection and be less prone to breaking than the rails of the first Switch.
That notch on that connects to the joycons is apparently a magnet, so there's no need to be forceful with it you would just gently move the magnetic receptors towards eachother and the magnet would do all the placing for you. I feel like if you break a magnetic piece of hardware like that it's your own fault for introducing kinetic force to a magnetic force where it is unnecessary.
when it flicks to the back you can see buttons on the back of the joycons, so maybe they have the same lock buttons but just use magnets instead of a rail
Finally, ive been waiting for the ability to press buttons!
0:26 when I first heard it, the sounds hit my autistic brain like a chefs kiss
Apparently we’re not done paying astronomical amounts for partial performance boosts and a console that sits on a desk for a year.
3:39 - 4:13 There's a separate button that you'll need to press to release them, like on Switch 1. It shows it on the website
1:07 according to leakers so it might not be true, but the joy cons are supposed to be Hall effect so it is impossible. If not, at least way less likely for them to get drift. Again, I could be wrong and I’ll eat it if I am.
Wow ur the newest comment
If you look at the end of the colored section of the joy-con at around 00:48, there seems to be an indent, most likely for the snap-in snap-out connection.
At 01:34, you can see the back triggers, including a new secondary trigger on both joy-cons. On the bottom, next to the joycons, there seem to be small buttons on the main body of the console, possibly for separating the joy-cons?
Watching it again, at 00:32 it shows what i thought was a "button" is actually the foot for tabletop mode! So no idea how the separation works.
The extra back triggers are for releasing the joycons. It was in a how to use type video by Nintendo