Launch CRP919e BT coding the BMW FRM module after repair with CG100pro.

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 พ.ค. 2024
  • After this FRM module is repaired with CG100pro, in most cases it needs to be coded.
    For those interested in this programmer, I recommend that you buy it from the manufacturer because there are many fakes on the diagnostics market.
    The link for those interested in this programmer:
    Launch CRP919EBT
    UK www.amazon.co.uk/LAUNCH-Bluet...
    DE
    www.amazon.de/YZB17-A/dp/B0CX...
    USA
    www.amazon.com/LAUNCH-CRP919E...

ความคิดเห็น • 34

  • @malekashram1185
    @malekashram1185 หลายเดือนก่อน

    thank you man for this information

  • @user-xc8yh5ls1x
    @user-xc8yh5ls1x หลายเดือนก่อน

    Great video ❤

  • @EIRK2046Y
    @EIRK2046Y หลายเดือนก่อน +2

    Nice work. Thank you.

  • @Doctor_88
    @Doctor_88 หลายเดือนก่อน

    I have the same model of Launch bit I bether perfer Autel scaners..bdw good video,like to wach your videos

    • @YOYODiagnostic
      @YOYODiagnostic  หลายเดือนก่อน

      Autel is a great tool too 👍

  • @ChangoeMotorsport
    @ChangoeMotorsport หลายเดือนก่อน +1

    🤣 I agree with you! Some of them they like to drive BIG cars but got a small wallet to fix it🤣 * Not all of them * Great video again!

  • @vladalexandrucojoc921
    @vladalexandrucojoc921 หลายเดือนก่อน +1

    Hello Yoyo în me opinion is very good this tool, thank you for The time and knoledge. All the best

    • @YOYODiagnostic
      @YOYODiagnostic  หลายเดือนก่อน

      Thank you for your support 👍

  • @carlosjkc
    @carlosjkc 28 วันที่ผ่านมา

    Hi. I have a question about this tool. Can it do mercedes scn coding?
    Thanks for your time
    And continue with great videos.

    • @YOYODiagnostic
      @YOYODiagnostic  28 วันที่ผ่านมา +1

      Hi.
      I will give it a try and I'll let you know or I will make a video.

  • @fanelx06
    @fanelx06 หลายเดือนก่อน

    Hello,what do you recomend Topdon artidiagpro vs launch 431pros crp919x bt. ?

    • @YOYODiagnostic
      @YOYODiagnostic  22 วันที่ผ่านมา

      Hi,
      your comparison is not correct because artipad can do coding and Launch named by you does not have this function. Look well informed and read carefully what the manufacturer writes. Launch CRP 919x cannot do coding, this one is cheaper, For 100 euros more you buy CRP 919E which fulfills the same conditions as Artipad named by you. To summarize, they all belong to Launch (Topdaon, ThinkPad, thinkcar, Kingbolen, Artipad). All these companies are children of Launch.

    • @fanelx06
      @fanelx06 22 วันที่ผ่านมา

      @@YOYODiagnostic ok thank you very much, i think best choice is crp919E

  • @hellcat1988
    @hellcat1988 10 วันที่ผ่านมา

    Have you lost the ability to program tire pressure sensor id numbers into your vehicle computer with your scan tool? The one I bought allowed me to program in the id codes for 2 of my new tire pressure sensors on a 06 dodge grand caravan, but I didn't do all 4 at one time. After I finally changed the other tires, the reader wouldn't connect to the van any longer so I updated the software on the scanner. Now, it will no longer allow me to do anything but see the id numbers. Even then, I have to fight through various menus to get to that point. The scanner I bought is the non-bluetooth version by the same seller.

    • @YOYODiagnostic
      @YOYODiagnostic  3 วันที่ผ่านมา

      This is a software problem. Did you write to the company Launch about this problem ?

    • @hellcat1988
      @hellcat1988 3 วันที่ผ่านมา

      @@YOYODiagnostic I've gone back and forth with them to the point that they admitted that they can't push the old software as an update to fix their screw-up, and they'd rather send me new proprietary tpm sensors and a tool that is supposedly going to work to get the vehicle to recognize them free of charge, rather than fix the software and push a new update.

  • @Flash-bu3ug
    @Flash-bu3ug หลายเดือนก่อน

    hello , i watched your video about VCX and i'm confused between it and scanmatik 2pro
    i'm new to programming and diagnosing
    and i'm searching for the best pass-thru
    because i'm a beginner
    what do you recommend for me
    i will mainly scan European cars (Renault - mb - bmw - vw - fiat ..etc )
    thank you

    • @YOYODiagnostic
      @YOYODiagnostic  หลายเดือนก่อน

      Hello. What do you want to do scanning the car or do you think about tuning?

    • @Flash-bu3ug
      @Flash-bu3ug หลายเดือนก่อน

      @@YOYODiagnostic
      scanning and diagnosing
      and programing the ECU (Delete EGR...etc)
      programing gearbox
      not sport tuning
      just basic maintenance or problem diagnosing

    • @YOYODiagnostic
      @YOYODiagnostic  หลายเดือนก่อน

      I think you are confusing things a bit. EGR delete belongs to the tuning programmer, which is ruled out because this is a j2534. It replaces certain original diagnoses and that's about it.

    • @Flash-bu3ug
      @Flash-bu3ug หลายเดือนก่อน

      @@YOYODiagnostic
      yeah i searched about it
      but now i want a suggestion from you
      for a scanner i can start working with
      is it the VCX or Launch or Autel or SM2 pro original

    • @YOYODiagnostic
      @YOYODiagnostic  หลายเดือนก่อน

      @@Flash-bu3ug
      Again your comparison is not good. Launch and Autel have their own operating software. VCX and SM2 pro are based on other software, they do not have an operating system. So it is clear that Autel or Launch is more efficient.

  • @anvinashok7589
    @anvinashok7589 19 วันที่ผ่านมา

    Does this have scn coding

    • @YOYODiagnostic
      @YOYODiagnostic  17 วันที่ผ่านมา

      It has an option for SCN but I didn't try it.

  • @mohammadorabi2642
    @mohammadorabi2642 หลายเดือนก่อน

    Can this tool code bmw e60 szl?

  • @smarty0604
    @smarty0604 หลายเดือนก่อน +1

    If you are stupid you must pay 😂😂 love it , great vids as always mate , couple of questions I might have missed you saying on the video ?
    Can you use off line or just internet only ?? And can you use after sub run out or is a brick ?
    Any idea what the update cost are ?
    Thank you

    • @YOYODiagnostic
      @YOYODiagnostic  หลายเดือนก่อน

      You're right, I missed some information in the review, thanks for reminding me 👍
      The license is about 150 euros per year from what I saw. After the 2 years of free update, if you don't want to pay for the license, the programmer can be used without any problem, only that you can no longer update. Yes, it can be used offline, I used it and there is no functionality problem, only in the case of the Ford brand, which requires an internet connection if you want to do certain resets.