Cool concept and some great skating. Loved the pole grind blunt grab to flakier and that switch Benihana came out of nowhere! I’m guessing that this is San Diego since there was a bunch of skate mafia guys in this?
Rhino!! Come thru Sacramento CA please!! We have a sick ditch over here by the Arden Mall that is calling your name bro!! And 100 other spots, for real. I'm willing to put in some man power and even a lil $ to get it goin. Y'all make me proud to be a lifelong Indy rider. ❤
So impressive some skaters can skate like this after doing 10 beer bongs I can barely even walk drunk let alone fly down a huge stair set doing a 360flip
some people stay drunk. also did you see where the santa cruz guys were spinning in those chairs and then taking off running? us mortals cant do that but they can for some reason
@@jbean9021Yeah more than likely. Maybe I shoulda of worded it as tried to kick them out. But It's also right next to a road which isn't the kind of place they're likely to get a permit to do it. And it's not that big a project really. A few poles a few holes a few bags of cement and done. 🤷♂
Just to be clear..what kind of lizard goes i to the concrete? There are only a few different kinds in my region. Hate to use the wrong kind and my concrete crack.
This is great! If you ever want to one-up it, I'd absolutely love to see something like this, except with the obstacles so well visually integrated into the environment that no one notices their presence.
It could just need a new nut too bro. If that lil vinyl ring on the inside gets to thrashed the nut will loosen. If not that then you may consider rethreading or even replacing the kingpin. On the NHS website they have an inverted kingpin kit, which works on any Indy. Those will NEVER have this issue 😅😅😅
either get a new nut or use loctite. you probably wore the nylon off of the threads. so a normal nut that size wont work. they are still common though just bring the old one or say you need a nylon nut to fit a 3/8 bolt. thats all a kingpin is, a 3/8 bolt
it should bbe there for a good bit the way the made it. it also depends on the skaters not leaving trash everywhere or causing a big scene . most of the skaters i know dont really do those things but they still happen.
@@chrhadden you’re missing my point, the fact that they are made for this spot makes the DIY factor thru the roof. They could’ve had those random rails lying around and someone they know had a welder to piece them together. This all involves doing recon and scoping out the spot, brainstorming, taking measurements, and sketching ideas out etc. then you get some homies who skate and already work in construction and have some tools (if ya don’t know, lots of skaters work in this industry). Get the homies to pitch on supplies and beer and one or two weekends of time. Work smarter not harder.
Rhino is preaching the gospel to turn the whole planet into one big skate spot..... Killer tunes by the way!!!!!
rhino wearing a limo hoodie is busting my head😭
Rhino knows whats up
kinda gros ngl
Rhino. Still doing the lords work
Indy videos always have the best music! Thank you Jesse and Jacob for the beast editing🔥
this is the worst music i have ever heard its muzac the guy isnt even saying anything but gibberish its stupid bleck the worst. you must be kidding
I love skateboarding. This sport/art is the ultimate.
ALL HAIL RHINO
No shit, wow! Rhino is a true professional when it comes to building up the spots. Definitelynot your average DIY that's for sure
Matlock 😂
Pure skateboarding !
I didn't want this to end. So sick. Rhino is a G. Hopefully dude that got pitched is all right. Spot looks fun. Good stuff 🍻
So good...doing a service to the community!
You guys did a great job with this one. makes me want to go skate!
The editing was very well done . Kudos
Masterful Edit. 🔥 🔥 🔥
Rad soundtrack and rad skating!!!!!
that muzac is crap. its not even real music
So Sick! Rhino doing the lords work 🙌🏼
That's how the pros do it 💥🤙
crew coming thruuuuu!
Cool concept and some great skating. Loved the pole grind blunt grab to flakier and that switch Benihana came out of nowhere! I’m guessing that this is San Diego since there was a bunch of skate mafia guys in this?
That bail was Gnarly!
This is so much fun!!!!!
brett killed it!
California is wild. Dope spot.
I can barely get a crew together just to skate these days! So jealous of the ride or die crew..
Sick shit!
Rhino!! Come thru Sacramento CA please!! We have a sick ditch over here by the Arden Mall that is calling your name bro!!
And 100 other spots, for real.
I'm willing to put in some man power and even a lil $ to get it goin.
Y'all make me proud to be a lifelong Indy rider. ❤
Ditch by Arden you say? 👀
So sick!!!
So impressive some skaters can skate like this after doing 10 beer bongs I can barely even walk drunk let alone fly down a huge stair set doing a 360flip
some people stay drunk. also did you see where the santa cruz guys were spinning in those chairs and then taking off running? us mortals cant do that but they can for some reason
Ive said it before and ill say it again. best channel on youtube
Very much good
Sick content.
Amazing ❤
Sooo dope
Inspiring
So good
sponsor johnrob immediately
Nice work!! Concreted em in and all.
Was half expecting the cops or council to show up and kick ya out.
They most likely had permits. That’s a big project to risk doing it illegally.
@@jbean9021Yeah more than likely. Maybe I shoulda of worded it as tried to kick them out. But It's also right next to a road which isn't the kind of place they're likely to get a permit to do it. And it's not that big a project really. A few poles a few holes a few bags of cement and done. 🤷♂
Beast company
Homie was holding that lizard like a Joint 😅
🛹 sick
ill watch these since thrasher doesnt make enough DIY vids
woah is that first song from the 1960s?!?!
damn that was one of the best/worst slams I've ever seen. spots sick!!
yeah that was a quadruple scorpion
is this in national city?
Get rhino his own channel
F/N RAD ! 🤘😆🤘❗
Just to be clear..what kind of lizard goes i to the concrete? There are only a few different kinds in my region. Hate to use the wrong kind and my concrete crack.
This is great! If you ever want to one-up it, I'd absolutely love to see something like this, except with the obstacles so well visually integrated into the environment that no one notices their presence.
My kingpin nut on my Indy’s keeps loosing while I’m skating any tips to fix this?
Might need to rethread it.
It could just need a new nut too bro.
If that lil vinyl ring on the inside gets to thrashed the nut will loosen.
If not that then you may consider rethreading or even replacing the kingpin.
On the NHS website they have an inverted kingpin kit, which works on any Indy. Those will NEVER have this issue 😅😅😅
Superglue
Same happening with the nut holding on my wheels but I don’t have money for a rethreader or for new anything
either get a new nut or use loctite. you probably wore the nylon off of the threads. so a normal nut that size wont work. they are still common though just bring the old one or say you need a nylon nut to fit a 3/8 bolt. thats all a kingpin is, a 3/8 bolt
🔥🔥🔥
Making it happen.
This is so fucking wholesome. Hopefully the city leaves it alone!
LA looks so dope you can just get away with anything because the police are so busy dealing with everything else going on in the city
Looks like San Diego from the harbor shot. But ya so cal in general you’re certainly right on the cops haha
Poop everywhere 🤢
@@CavemanVanDweller as Larb aka Sam Hits would say "DIRTY NEEDLES!" 😂😂
@@CavemanVanDweller just Ollie over the poop piles
@@559 how progressive, stunning, and brave? Plague poop 🤢🤢🤮
so fucking sick
Gas
🤘🏼🔥
Fuck Yeah!
You truly don’t see any other truck company building spots and destroying them, ride the best fuck the rest
this DIY rules however how long until "THE MAN" finds it and takes away the fun ?
it should bbe there for a good bit the way the made it. it also depends on the skaters not leaving trash everywhere or causing a big scene . most of the skaters i know dont really do those things but they still happen.
Brandon Turner 8:38
Bummer that spot only lasted for a lil bit
811 call before you dig 👷
Took me like 25 mins of finding exactly where this spot is on google earth.
Berra eat your heart out
🛹🛹🛹
lol...those damn stoners couldn't get shit done without Rhino! lmao
•͡˘㇁•͡˘
lol. There is nothing "DIY" about bringing a massive professionally fabricated flat bar to a spot.... just sayin...
yeah their idea of DIY while rolling up to the spot with a van full of tools and supplies that prob costs more than a year of some ppls rent...
@@SamLSkates lol and with dudes who are most likely professional contractors and/or have built professional skateparks.
Oh quit your complaining and work smarter not harder 🙌 also, just an observation, but those rails are looking pretty custom made for that spot…!
i know right. like that thing wasnt $1000+ to have it built semi custom. we all have those lying around
@@chrhadden you’re missing my point, the fact that they are made for this spot makes the DIY factor thru the roof. They could’ve had those random rails lying around and someone they know had a welder to piece them together. This all involves doing recon and scoping out the spot, brainstorming, taking measurements, and sketching ideas out etc. then you get some homies who skate and already work in construction and have some tools (if ya don’t know, lots of skaters work in this industry). Get the homies to pitch on supplies and beer and one or two weekends of time. Work smarter not harder.
Crazy to think that the Rhinoceros does all this work just to have the city employees come by the next day to destroy it all. 🦏