The sides are compensated to give the correct radius, which is calculated for a 6.3mm thickness over a 20mm block. Of course, if you lower the bit more than that it will give a slightly different radius. But this slight difference can be easily adjusted when sanding with a radius sanding block.
@@kosaponglusang4595 It was supposed to be delivered to you already set up. We always ship it ready-to-work. Not your case? Once again, thanks for the kind words!
@@GWLuthierSupplies yes it was set up .. but how to make the bearing and slotting heights adjustments .. as you know we all work with different sizes (thickness) of fretboard .... anyway no problem .. i download the pdf manuel just moments ago .. Thank you ... will order more tools very soon.. And yes keep posting more videos.. G&W should be noticed Worldwide .. ..Thank you
Not sure how many other people would use it, but a larger version of the would be helpful for the guitars I build, where I radius the front and back similar to an arch top.
I love this video! Is there any limitation to the overall height of a fretboard already mounted on the neck? Obviously it can fit under the jig. If I did the math correctly, I would think that the radius remains the same, regardless of the distance in which the fretboard is positioned in relation to the sled? Thanx in advance and cheers from Germany!
Hello there! The jig was developed considering the 20mm of the aluminium base (where the fretboard sits) in order to end up with the best rough radius and a thickness of 6.5mm at the fretboard center. You can adjust your process considering this would be the perfect scenario. Thanks!
Hi, very cool delivery. But I just guessing, what bit do you use to shape the fretboard? Any reference on your site?You should link the bit with your jig ,)
Thanks for your kindly comment and enquiry. You can find this item on the webstore searching for the title of this video "Fretboard Radius Jig V4". Best regards.
Good jig but if the sled is a true 12" radius here, the fretboard will be smaller by how much you lower the bit
The sides are compensated to give the correct radius, which is calculated for a 6.3mm thickness over a 20mm block. Of course, if you lower the bit more than that it will give a slightly different radius. But this slight difference can be easily adjusted when sanding with a radius sanding block.
notice you troll each person who makes these.
@stridersmythe8860 lol says he troll. Both of them had the same issue so get a f life
@@goopee76 your the one who trolls people to make yourself feel better.
@@stridersmythe8860ok you won! Fk off now
AWESOME G&W.. you guy have the best tools for luthier
Can you also please show a proper video of how to set up the fretboard slotting jig
Thanks! What do you mean by fretboard slotting jig?
Cheers!
@@kosaponglusang4595 It was supposed to be delivered to you already set up. We always ship it ready-to-work. Not your case?
Once again, thanks for the kind words!
@@GWLuthierSupplies yes it was set up .. but how to make the bearing and slotting heights adjustments .. as you know we all work with different sizes (thickness) of fretboard .... anyway no problem .. i download the pdf manuel just moments ago .. Thank you ... will order more tools very soon.. And yes keep posting more videos.. G&W should be noticed Worldwide .. ..Thank you
Not sure how many other people would use it, but a larger version of the would be helpful for the guitars I build, where I radius the front and back similar to an arch top.
I do that and built my own
I love this video! Is there any limitation to the overall height of a fretboard already mounted on the neck? Obviously it can fit under the jig. If I did the math correctly, I would think that the radius remains the same, regardless of the distance in which the fretboard is positioned in relation to the sled? Thanx in advance and cheers from Germany!
Hello there! The jig was developed considering the 20mm of the aluminium base (where the fretboard sits) in order to end up with the best rough radius and a thickness of 6.5mm at the fretboard center. You can adjust your process considering this would be the perfect scenario. Thanks!
@@GWLuthierSupplies excellent! thanx so much for your fast reply!
Hi, very cool delivery. But I just guessing, what bit do you use to shape the fretboard? Any reference on your site?You should link the bit with your jig ,)
Looks like 1/2in flat
Try one
I like this jig
would like to order, but site is down.
Sorry, we are under bot attack, so we had to shut server down. we hope we can get back tomorrow.
Hi, what are the dimensions of the aluminum base?
Also, are you guys working on a V5 of this jig?
Muito legal fera!
What bit is recommended? Just bought this set up
We usually recommend a 12.7mm diameter cutter. The height is dictated by your router and the height of the piece you are working on.
Olá boa noite !!! Vcs vendem para o Brasil?
Olá! Sim, vendemos para o Brasil!
Cumprimentos,
G&W
I goings to make one all alum and acrilic
Your site is a freaking night mare.
I want this rig: but I cannot find it on you bloody store
Thanks for your kindly comment and enquiry. You can find this item on the webstore searching for the title of this video "Fretboard Radius Jig V4". Best regards.
😁👏👏👏👏