Thank you for this video. I was able to remove and install new turn signals using this video. With small hands and a flashlight, I was able to successfully complete the work without removing the grill😂
What a great review. You are well-spoken, clear, and gave great detail. Thumbs up from me! About to check out your other videos... I hope to see a review of the working lights in there.
Definitely like the honest review man. Was looking at a pair of these for my JK. The look is badass, reviews online are pretty good so maybe it's a one off issue. Great video man.
That's some crazy shit right there! I got the recon led turn signals and haven't had any problems but i did have led resistors. Your stock lights use more power then leds that's why you need a resistor for your led to work properly or else you get the turn signal code in the dashboard and you get all those problems. Good luck getting it fix bro.
Hey man, sometimes things just don't work. If the company is honest with themselves and a reputable company, they will take this as an honest critique and maybe make some Quality assurance changes and thank you for helping them with the testing. People don't know something may be wrong unless someone says something to them. Great review bro.
Nice work! Sucks that there was an issue with the harness, because they look pretty promising up till that point. Kudos for sharing an install that didn't work.
Just to add... I have seen a few videos where it is believed lights are bad or something has been damaged with the harness. However, I have experienced what this video shows as an issue with reconnecting the harness. You have to slightly push up on the black clip, slide the red part back in, then push the harness on with more emphasis on the red clip side until you hear it snap into place. Mine functioned again after reconnecting it in this manner.
First thing, Great video! Thank you for showing the truth instead of just not posting the video. Second thing, I've been looking for some LED turns for a while now. Everything else on the front of our Willys is LED now (headlights, fog lights, a pillar lightsx4 and 6"bumper lights) I just don't like the look of all these LED turns, it's something about the pattern/arrangement of the LED's. I would much rather have a bunch of small LED's in a round pattern than just the 8 that all of the ones available seem to have. Has anyone seen any that are different? I really like the black out look though.
I saw your video after I bought the exact led fenders and turn signal lights you bought. and the same thing happened to my lights. I'm in the process of returning them and getting my money back, is there any other type of light that you know of that will work? I have a 07 jeep wrangler unlimited rubicon.
Good video. Not sure what brand the indicators are that I purchased, but they were cheap and look exactly the same as yours. I had the same issue when I installed mine. They didn't work or they caused the other indicators to flicker too quickly. I played around with the connections and after a while, I guess I got lucky as they started working. I really forced the wiring connection and then locked the tab in place. I hope they last lol
You should of used NTD. There build quality and QC is probably one of the best out there in terms of not having a whole lot of fail rates. I've had mine installed for going on three years and never a issue. Sold a ton of them as well without any issues
Hi, I had the same problem, but another Y.T. video said they had to zip tie the two connector together and that worked for me. The LED TS just do not firmly connect. My problem now is that when the headlights are on the TS don't work, when off they do.?
i wish i had watched this before i bought them!! exact same thing happened to me i have a 2013 Wrangler JK Sport and yeah, again, same thing here. sucks, now i have to return and wait... fml
hey brah, off subject but can ya get some crawler concepts ultra series rocker sliders and do a install video for them. I got some but it's the dreadful nut sert that scares the crap outta me to do to my DD. Their isn't a video for an install as of yet. Thanks a mil.
I had a pair of these. You need to install capacitors and do some rewiring if you want them to function properly. They look cool but don't perform well. Not bright enough for me.
Anthony S I'm sending a pair back today. I keep getting a dash board indication saying bulb is inop or not hooked up. They light up but then hyper flash due to not playing correctly.
Had the exact same situation happen. After I found out they didn’t work I was suspicious of it being something voltage related and figured they probably require some additional capacitor or harness. Such a stupid disappointment. I can only hope people see this and don’t buy them because the internet it littered with them
I noticed that this was posted several months ago did they ever get back to you what was the end result? By the way thanks for the reply I enjoy your videos keep em coming. I love the thriving Jeep community here on you tube. I've learned a lot just from watching videos like yours. The Jeep culture is truly one of its own.
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
Keeping it real is absolutely important, thanks for the video!
You got to man. It helps companies grow. Thanks for watching brother!
Great that you show that sometimes things don't work as they should...
It's definitely important man.
It's is awesome that the you tubers I follow actually watch each other's videos lol
+Seth Blaylock #Jeepfamily
Thank you for the tutorial. I just replaced my turn signals. Everything went just as you said in a tutorial thank you again.
Always love an honest review. Too many people just say it's good to get free stuff
This^^^
Wow. Great! Thanks for showing us how to install without taking off the grill.
This is where a wife or girlfriend comes in handy. Their smaller hands make it look easy.
Thank you for this video. I was able to remove and install new turn signals using this video. With small hands and a flashlight, I was able to successfully complete the work without removing the grill😂
Thanks!! Couldnt for the life of me figure out how to get these things out! Lol
Glad you reviewed these, hopefully they can resolve the issue and if they look good, I'll be getting some
+Joe Perez I'm down to do a follow-up review for sure.
What a great review. You are well-spoken, clear, and gave great detail. Thumbs up from me! About to check out your other videos... I hope to see a review of the working lights in there.
Thank you! I had fun with this one! Thank you for watching.👍🏼
Definitely like the honest review man. Was looking at a pair of these for my JK. The look is badass, reviews online are pretty good so maybe it's a one off issue. Great video man.
+Phillip Moore for sure man, give them a shot. Could totally be a one off thing. Thanks for watching! -Z
That's some crazy shit right there! I got the recon led turn signals and haven't had any problems but i did have led resistors. Your stock lights use more power then leds that's why you need a resistor for your led to work properly or else you get the turn signal code in the dashboard and you get all those problems. Good luck getting it fix bro.
Hey man, sometimes things just don't work. If the company is honest with themselves and a reputable company, they will take this as an honest critique and maybe make some Quality assurance changes and thank you for helping them with the testing. People don't know something may be wrong unless someone says something to them. Great review bro.
All true bother!
Nice work! Sucks that there was an issue with the harness, because they look pretty promising up till that point. Kudos for sharing an install that didn't work.
+OVERCLOCK3D - CPO Yes sir. Thanks for chiming in CPO!
Just to add... I have seen a few videos where it is believed lights are bad or something has been damaged with the harness. However, I have experienced what this video shows as an issue with reconnecting the harness. You have to slightly push up on the black clip, slide the red part back in, then push the harness on with more emphasis on the red clip side until you hear it snap into place. Mine functioned again after reconnecting it in this manner.
They look really good. I hope they can get them working correctly for you.
+stitch1007 I would love to do a follow up video on a working set. We'll see man.
First thing, Great video! Thank you for showing the truth instead of just not posting the video. Second thing, I've been looking for some LED turns for a while now. Everything else on the front of our Willys is LED now (headlights, fog lights, a pillar lightsx4 and 6"bumper lights) I just don't like the look of all these LED turns, it's something about the pattern/arrangement of the LED's. I would much rather have a bunch of small LED's in a round pattern than just the 8 that all of the ones available seem to have. Has anyone seen any that are different? I really like the black out look though.
+Rocky X TV Thank you Rocky. I agree with you on many fronts. -Z
I saw your video after I bought the exact led fenders and turn signal lights you bought. and the same thing happened to my lights. I'm in the process of returning them and getting my money back, is there any other type of light that you know of that will work? I have a 07 jeep wrangler unlimited rubicon.
Mine worked fine didn't have issues you have to make sure the left goes to the left and right to the right side
Thanks for sharing. Keep us posted on what they have to say about the issue??
Good video. Not sure what brand the indicators are that I purchased, but they were cheap and look exactly the same as yours. I had the same issue when I installed mine. They didn't work or they caused the other indicators to flicker too quickly. I played around with the connections and after a while, I guess I got lucky as they started working. I really forced the wiring connection and then locked the tab in place. I hope they last lol
You should of used NTD. There build quality and QC is probably one of the best out there in terms of not having a whole lot of fail rates. I've had mine installed for going on three years and never a issue. Sold a ton of them as well without any issues
+Jeep -N- Nation thank you for the tip. I’ve decided to keep these stick for now.
Hi, I had the same problem, but another Y.T. video said they had to zip tie the two connector together and that worked for me. The LED TS just do not firmly connect. My problem now is that when the headlights are on the TS don't work, when off they do.?
Good review man! I am thinking of getting similar lights, but I will have to wait and see which is best
+Alex Torres thanks for the support bro!
Great video 👍🏻
i wish i had watched this before i bought them!!
exact same thing happened to me
i have a 2013 Wrangler JK Sport and yeah, again, same thing here.
sucks, now i have to return and wait... fml
hey brah,
off subject but can ya get some crawler concepts ultra series rocker sliders and do a install video for them. I got some but it's the dreadful nut sert that scares the crap outta me to do to my DD. Their isn't a video for an install as of yet. Thanks a mil.
HAVING SAME ISSUES. WAS YOU ABLE TO GET IT RESOLVED?
I have a similar problem drivers front side not working cant find the problem
did you ever get a reply from them? I'm thinking of something like those or the diode dynamics.
I wonder if they tested them before shipping?
Ya I'm not sure. But I would love to see all mfg's test everything before it went out.
Damn What a bummer! I have a video on my channel with the same product and had no issues!
+AdventureDex So strange man.
you were able to install the lights without having to take the grill off?
+Skye Perez Yes sir! I cover it in the vid. Wasn't easy though.
JEEPARMY USA is it easier to take the whole grill off to do it?
And I thought I was the only one that had stoopid $h!t happened. My auxbeams were good 2 go. But I did remove the grill to do the install.
+Talez From the DashCam Nice! No hyper flashing for you?
NO I did not. They were fine.
I had a pair of these. You need to install capacitors and do some rewiring if you want them to function properly. They look cool but don't perform well. Not bright enough for me.
Anthony S I'm sending a pair back today. I keep getting a dash board indication saying bulb is inop or not hooked up. They light up but then hyper flash due to not playing correctly.
I hate it when you order accessories and you get the shaft but good video brother just go`s to show SH*T HAPPENS,
Have you gotten a programmer for your jeep yet? if so what kind?
+Carlos Morales Here you go Los! th-cam.com/video/bRaQjmXPNno/w-d-xo.html
any reason you went with that one over a bullydog?
I have problems with my light it is not on, only works when I put turn. what will happen?? my car is jk 2011 2door
+Jose Porto As you saw in my vid I too had problems. You may want to reach out to them. Maybe they'll have a fix. Thanks for watching!
my turn signal work when I give turn left or right..not serve when I turn light, not stays on
great 👍🏻
+Tyler Durden thanks Ty!
So what ended up being wrong with them?
I have no idea, I ended up sending them back
This job would be so much easier if you remove the grill which is very easy to do
Had the exact same situation happen. After I found out they didn’t work I was suspicious of it being something voltage related and figured they probably require some additional capacitor or harness. Such a stupid disappointment. I can only hope people see this and don’t buy them because the internet it littered with them
You know, thinking back I would have probably went back to the oem ones anyway. The newer oem ones are a cleaner look in my opinion
I bet you had the left and right mixed up. Plus it wasn't seating right.
I'm not giving you a thumbs up, they didn't work haha
Doh!! lol!
+Ricardo Massa Ya man, was really hoping these would work. Maybe it was just my pair.
I noticed that this was posted several months ago did they ever get back to you what was the end result? By the way thanks for the reply I enjoy your videos keep em coming. I love the thriving Jeep community here on you tube. I've learned a lot just from watching videos like yours. The Jeep culture is truly one of its own.
+Ricardo Massa thank you for the kind words brother. And no, they haven't got back to me. I totally agree about the Jeep community, good people.
CovidImages need to be invested more than half19