Suction valve din kaya problema pag low power check engine pero hindi namamatay. Kapapalit lng kasi ng bagong.. maf sensor bagong solenoid vaccum sensor. Pero check engine p rin
Boss idol ano kadalasan issue ng fortuner fuel large leak yung code tapos engine knocking naka limp mode , bago scv, common rail assembly, okay naman mga hose niya walang leak,
Idol yung pinaka dulo ng scv adaptor yung sa akin alterra original meron dulo adaptor noong pinalitan namin binalik namin yung dulo adaptor hirap umandar kaya binalik namin yung original kasama yung adaptor ...kailangan tanggalin yung adaptor o dina isama?
Diagnostic Aids • An intermittently sticking FRP regulator may have allowed the fuel pressure to become low enough to set this DTC. • Normal Fuel Rail Pressure readings on the scan tool with the engine running in neutral at idle is around 27 to 33 MPa (3,900 to 4,800 psi) after warm up. • A skewed FRP sensor value can set this DTC. The FRP Sensor on the scan tool should read 0.9 to 1.0 volt with the key ON and engine OFF after the engine has stopped running for a minimum of 1 minute. Notice: • This DTC most likely indicates a loss of fuel pressure by a restricted suction side fuel line. Inspect the suction side fuel restriction between the fuel supply pump and the fuel tank. • If the fuel tank is empty or near empty, air might be allowed to go into the fuel system. With air in the fuel system, smooth flow of fuel into the supply pump is interrupted and this DTC may set. Perform bleeding of fuel system after refilling.
Possible causes 1. Defective SCV 2. Defective fuel rail pressure sensor 3. Clogged fuel filters or clogged fuel lines from tank to pump 4. Defective high pressure pump need to repair or replace 5. Defective fuel limiter valve 6. Defective wiring SCV and FRP sensor 7. Defective one of the injectors need repair or replace
Sor, good day .new subscriber niu po ako... 4jj1 po ang makina ng dmax ko year 2008, nag ka-crank naman po siya pero hindi mastart... napanood kopp ung mga videos niu at ung sunction valve po ung parating may sira... possible din po ba na yan din ang sira ng dmax ko? Salamat po
@@armansretunedgarage what do you mean? Basta alam ko ito ay na overhaul na dati pa. Ngyn pag dating sa leyte, e pina overhaul nanaman ng mekaniko dahil daw sa oil leakage. Pinasok ang makina. Wala ang turbo kaya di makapag Overtake at pati EGR nadamay. Ngyn na overhaul na, wala paring Turbo at yong EGR hindi napalitan kasi walang stock sa Tacloban kasi yon suggestion nya. At bawal pa daw tumakbo lagpas 80 kasi bago daw mga spare parts na ipinalit. Red Flag daw sabi ng pinsan ko sa mindanao. 😔
@@armansretunedgarage Yong EGR lang hindi na palitan. Pero pag mag over take ako, walang power na mag tutulak pag itinudo ang gas pedal. Turbo po ba tawag doon?
Sir good day. Kapapalit ko lang ng SCV ng 2017 mux 3.0 Matic. Pero namamatay pa rin siya at sobrang umiinit yung scv na nabili ko. genuine naman siya. ano kaya problem?
Injector group A suply voltage circuit low yan lumabas sa scan sir nung pina check ko. Ano po kaya ibig sabihin nyan low power at hard starting napalitan nadin naman namin ng suction control valve?
Sir may concern lang po ako d2 sa Isuzu MUX RZ4E Manual 4X2, 2018 model. Mahigit 80,000 kms na natakbo nya. Pag ang bilis po nya is between 40 to 55km/hr may napapansin mo akong putol putol na UGONG na parang may sumasabit. Pero pag lumampas na sa 60 km/hr pataas wala nako marinig na putol putol na ugong. Ano po kaya possible problem nito.
@@ferminturianojr.4860 Based on symptoms Mentioned above: possible causes 1. Alternator fan belt damage 2. Cooling fan clutch problem 3. Air filter housing or filter assembly damage or maluwag 4. Crack turbo hoses 5. Turbocharger solenoid defective Better pa Check sa mechanic, test drive and with scan diagnosis
Good day sir, Arman! Balak po sana naming bumili ng SUV. Isa po itong Alterra sa tinitignan po namin. Mai-rerecomend nyo po ba sya as reliable unit? Sana po mapansin. Salamat sir and God bless po!
Galing mo Po idol salamat sa magandang Kaalaman good job
Thanks po
4JJ1 Isuzu elf dol bka gnun sira sa Amin ayw na umandar pinalitan Ng filter gnun bleeding dol on of on of
Ayos Lods, Nc sa pagbahagi kaalaman. Para mapalinabangan teknik sa saan pag nagloko sasakyan
Salamat
God Bless
Nice video sir arman. Salamat sa educational video mo.
Galing mo idol..lagi ako nka abang sa new videos mo..isuzu alterra Mt same model ng sasakyan nla tita..matipid sa diesel yan..👍
Gling muh idol gnun pla pag bleding sa mga 4jJ1.dol on of
ngutana ko lods..unsa nindot panglimpyo intake manifold..pangtanggal carbon..basi naa ka isuggest
Gaas... Then Power wash
@@armansretunedgarage thank you lods..
Kulang ng pms chief...
Yes Sir.
Sir arman sa pwide po bah ang scv na mux at isuzu dmax 2008
Yes Sir
2016 Mux need paba on off pag nag palit fuel filter
No need napo
Manual priming pump po ang fuel bleeding procedure
@@armansretunedgarage thank you
Thank you, great video.
You're welcome
Bro isa ba gihapon na sa hinungdan mu wild ang 4jh1? Hugaw sad ako filter... 2005 isuzu dmax
Better ma SCAN po.
Pero possible cause.
Throttle position sensor or TPS problem po. Bilhan mo genuine TPS po
Boss arman pwde ba palitan ng VGS turbo ang 4jj1 yung pang 4jj1 din na turbo pero VGS na boss??
Hindi dahil walang control para sa VGS operation
Sir San nabili ang modified SCV at ano po ang part number?
Suction valve din kaya problema pag low power check engine pero hindi namamatay. Kapapalit lng kasi ng bagong.. maf sensor bagong solenoid vaccum sensor. Pero check engine p rin
Please check fuse 10A - engine fuse
Sa fuse and relay box. Replace new Fuse
Bro mangutana ko bro nano amo dmax 2007 4JH1 ga palong rag kalit
Need lang Nako information Kay sgi lang mig kapalongan
Possible causes.
1.crankshaft sensor defective
2. Injection pump need calibration
Very good sir scanner name price please share
Hii
Foxwell NT634
12,000 pesos
Sir San po kayo naka bile Ng suction control valve?
Sa Isuzu dealership
Magkano po kuha nyo?
@@jerectey3115
8500 pesos
Salamat po sa info sir🙏
meron bang suction control valve ang dmax 2004 model sir?
No po
Boss yung sportivo ko hirap humatak sa akyatan at nag bblink yung check trans niya?
Need scan diagnosis.
Location Boss?
Davao city po Ako
Boss idol ano kadalasan issue ng fortuner fuel large leak yung code tapos engine knocking naka limp mode , bago scv, common rail assembly, okay naman mga hose niya walang leak,
1. Relearn supply pump,
2. Injector back leak, if bad calibrate or replace
3. Overhaul supply pump
4. Check pressure limiter valve
Sir good day...mliban po sa gamit mo scanner ano po pwede mo mai recomend na scanning tool?
Scan tool Brand
1. Foxwell
2. Ancel
3. Launch
4. G-scan
lodi
Kapag Bagon andar boss tapos.medjo mausok ..dn parang fuel knock at delay sya..ano kaya kadalasan i check?
Fuel filter po at yang suction control valve
@@armansretunedgarage Bago na fuel filter boss..yung suction control valve lang pa napalitan...
yung suction lang hindi pa napalitan..mahirap hanapan kasi surplus na RF turbo engine..
@@TopersMechanics
Best pa SCAN Diagnosis muna
@@armansretunedgarage hindi nagreading yung scanner s casa boss..kasi surplus yung sasakyan..Converted na pati wiring..
Astig!!
Thanks po
Boss saan shop mo? May problema yung sakin dmax 2006 mdl matic bigla namamatay tas mababa rpm
Davao city po ako Sir.
Anu po ba engine model?
4jj1 or 4jh1?
Idol yung pinaka dulo ng scv adaptor yung sa akin alterra original meron dulo adaptor noong pinalitan namin binalik namin yung dulo adaptor hirap umandar kaya binalik namin yung original kasama yung adaptor ...kailangan tanggalin yung adaptor o dina isama?
Ok po. Dependi po sa model ng Hp3 pump.
th-cam.com/video/17q3K1IsYvY/w-d-xo.html
th-cam.com/video/QCkn7DmaG5o/w-d-xo.html
Please click Link...
If meron adapter dati, kailangan palitan with adapter din
Sir ano po problema pag naglalangis yung oil pan ng transmission?
Check for seals and gasket leak
@@armansretunedgarage Thank you sir! Madali lang po ba palitan yung gasket ng catch pan o medyo challenging?
Sir, paano po mag relearn ng SCV ng isuzu alterra 2006
Relearning procedure using SCAN tool po.
Paano mlamn dol kung sira na scv.sa 4JJ1 idol
New fan here sir, ask lang po planning to buy altera ma erecomend nyu pa Rin ba Yung 2008 AT 4*2.?
Yes Sir.. dependi po sa price
Good po yon.
Dependi sa usage ng dating owner
5x naman ginawa ko sa dmax on & off nung nagka tubig sa fuel tank after ma drain sa fuel filter.
Ayos
sir pa help po, d max 2008 ko low power minsan at may check engine faults p1093, scv na ba papalitan? thank you
Diagnostic Aids
• An intermittently sticking FRP regulator may have allowed the fuel pressure to become low enough to set this DTC.
• Normal Fuel Rail Pressure readings on the scan tool with the engine running in neutral at idle is around 27 to 33 MPa (3,900 to 4,800 psi) after warm up.
• A skewed FRP sensor value can set this DTC. The FRP Sensor on the scan tool should read 0.9 to 1.0 volt with the key ON and engine OFF after the engine has stopped running for a minimum of 1 minute.
Notice:
• This DTC most likely indicates a loss of fuel pressure by a restricted suction side fuel line. Inspect the suction side fuel restriction between the fuel supply pump and the fuel tank.
• If the fuel tank is empty or near empty, air might be allowed to go into the fuel system. With air in the fuel system, smooth flow of fuel into the supply pump is interrupted and this DTC may set. Perform bleeding of fuel system after refilling.
Possible causes
1. Defective SCV
2. Defective fuel rail pressure sensor
3. Clogged fuel filters or clogged fuel lines from tank to pump
4. Defective high pressure pump need to repair or replace
5. Defective fuel limiter valve
6. Defective wiring SCV and FRP sensor
7. Defective one of the injectors need repair or replace
salamat sir!
@@kenthendrixarguelles1896
You're welcome Sir
Idol part number po suction control valve dmax 2008
8-98145453-1
Overhaul kit; supp
Asa tika ma contact bro? Ngayo ko tabang nimo sa akong 4jh1 isuzu dmax... mu wild man oi.. ug mu amdar man gani ma palomg dayun nya way throttle
Throttle position sensor problem
09093941032
Davao city po Ako
Sor, good day .new subscriber niu po ako... 4jj1 po ang makina ng dmax ko year 2008, nag ka-crank naman po siya pero hindi mastart... napanood kopp ung mga videos niu at ung sunction valve po ung parating may sira... possible din po ba na yan din ang sira ng dmax ko? Salamat po
Possible rin po.
Pero mas magandang ma check ng mechanic with Scan diagnosis.
Para sure
Alterra 2010 MT.
Na overhaul 😭
Nabaha po ba?
@@armansretunedgarage what do you mean?
Basta alam ko ito ay na overhaul na dati pa. Ngyn pag dating sa leyte, e pina overhaul nanaman ng mekaniko dahil daw sa oil leakage.
Pinasok ang makina.
Wala ang turbo kaya di makapag Overtake at pati EGR nadamay.
Ngyn na overhaul na, wala paring Turbo at yong EGR hindi napalitan kasi walang stock sa Tacloban kasi yon suggestion nya.
At bawal pa daw tumakbo lagpas 80 kasi bago daw mga spare parts na ipinalit.
Red Flag daw sabi ng pinsan ko sa mindanao. 😔
@@kingofspadesjack572 ahh ok po.
Naayos na pala
@@armansretunedgarage
Yong EGR lang hindi na palitan.
Pero pag mag over take ako, walang power na mag tutulak pag itinudo ang gas pedal.
Turbo po ba tawag doon?
Low power po makina mo Sir
Boss arman saan maka bili ng ganyan klase ng scv sa davao? At magkano po boss?
Sa Isuzu dealership CASA 9000
@@armansretunedgarage asa imo shop boss?
@@migueljoshuamaningo4747
Home service lang ko Sir.. within Davao city
@@armansretunedgarage mag kanu bili mo boss sa scv sa casa na upgrade
Sir good day. Kapapalit ko lang ng SCV ng 2017 mux 3.0 Matic. Pero namamatay pa rin siya at sobrang umiinit yung scv na nabili ko. genuine naman siya. ano kaya problem?
Throttle valve pa check po.
Baka defective
@@armansretunedgarage Salamat boss. nagpalit na ako ng Throttle Body as per advice of isuzu technicians dito sa La Union. So far so good
@@brevinjosefpurisima9371
You're welcome Sir
Boss Arman!Good day sa iyo. Balak kong kumuha ng 2013 model na alterra. Tanong ko boss ang parts availability. Salamat..God bless..
Yes Sir available
@@armansretunedgarage maraming salamat!
@@armansretunedgarageBoss, sa Davao City ba shop? Thanks
Injector group A suply voltage circuit low yan lumabas sa scan sir nung pina check ko. Ano po kaya ibig sabihin nyan low power at hard starting napalitan nadin naman namin ng suction control valve?
Possible causes
1. Injector 1&4 defective
2. Injector 1&4 wiring connection losses or open circuit
3. Computer box defective
Meron na Naman ako natutunan SA iyo Brod Arman
Thanks Sir
Sir may concern lang po ako d2 sa
Isuzu MUX RZ4E Manual 4X2, 2018 model.
Mahigit 80,000 kms na natakbo nya.
Pag ang bilis po nya is between 40 to 55km/hr may napapansin mo akong putol putol na UGONG na parang may sumasabit. Pero pag lumampas na sa 60 km/hr pataas wala nako marinig na putol putol na ugong.
Ano po kaya possible problem nito.
Cooling fan
Possible normal operation ng cooling fan clutch.
Actually sir ganito tunog naririnig ko (woh woh woh woh sound)
Ok lang po ba yan sa overall operation ng car?
@@ferminturianojr.4860 mas magandang ma check at ma test drive sa mechanic. Para mas ma pin point ang problem
@@ferminturianojr.4860
Based on symptoms Mentioned above: possible causes
1. Alternator fan belt damage
2. Cooling fan clutch problem
3. Air filter housing or filter assembly damage or maluwag
4. Crack turbo hoses
5. Turbocharger solenoid defective
Better pa Check sa mechanic, test drive and with scan diagnosis
Anyone who knows suction control valve learning procedure
With scan tool procedure po
Good day sir, Arman! Balak po sana naming bumili ng SUV. Isa po itong Alterra sa tinitignan po namin. Mai-rerecomend nyo po ba sya as reliable unit? Sana po mapansin. Salamat sir and God bless po!
Yes Sir 2011-2013 better
Maraming salamat sir Arman!
th-cam.com/video/17q3K1IsYvY/w-d-xo.html
Ang gulo mo mag vlog d maintindihan d ka gaya n doc Cris napakalinaw mag vlog dapat Alan na Rin kung kailan palitan just for vlog
Thanks Po Sir, I appreciate your comments
Sir pwede makuha cp # mo para gagawa ako ng altera ko
Davao city po ako
09150875574
th-cam.com/video/QCkn7DmaG5o/w-d-xo.html