lol, bitter or angry much.. yea working your entire life, saving and not being an idiot expecting everything for free pays off. Perhaps you should try it instead of crying and blaming others for you failure. 🌈🍼😿
Rick don't get me wrong nothing is for free but when everything gets more expensive and the job doesn't pay more you get angry at people. I get angry at the government. Here in Austria the taxes are brutally high.... I know we dug our own grave but if you always vote for less government and you get more government you get angry at the people. My dream is to have a house like you. (and some kids, and a wife). I know I talk a lot but our government is talking about disowning houses. I already work 60 hours a week as a Ironworker and work out but it get frustrating, because you will never get the dream. I am 19 years old and if I look at the western economy it for sure won't get better.
Rick may be a boomer technically, but I've been watching him for some time and he doesn't run around shitting on us younger folks, unless you are a lazy bum that votes lefty and bitches that no one is handing you money to weave underwater, rainbow baskets..
I wrapped leather around my lever. 4 years later, I took it off. Found rust under it. I hunted with it, so probably from moisture. I learned something there.
I usually have mine wrapped with camo tape for protection but take it off every few weeks and give everything a clean. Eezox for the metal and renaissance wax for the timber.
Love it Rick ! You gave your Rossi a bit of a “Finished “ look with the saddle ring, makes your rifle look more authentic. I’ve always been a sucker for saddle rings.😊 Well done ! 👍 Looking forward to tonight’s Live. See ya at 7pm Texas Time 🤠😉.
Some live in fear of the inevitable collapse of humanity.... other's prepare for the inevitable, and make sure to have all the proper tools on hand..... Mr.Gore U R A National Treasure.
Lube, thats whats was missing, Lube!. What were you hiding from us in the crotch area? Does that happen often? You may need a massage appointment for that if it doesn't go away after 4 hours.
Rick, A quick check for bolt compatibility. Put the threaded ends together to check size then if that’s good flip one bolt over ( like one head north the other south) then mate the threads together. If they interlock it’s the same thread pitch, and you’ll never mess up the interior threads.
*Tip:* When you want to see if the threads are the same pitch use one thread as a gauge for the other by trying to engage the points of one thread into the groves of the other. If the threads engage then they are the same pitch. If the threads are the same pitch then you check to see if the screws/bolts are the same diameter.
I bought a can of SC Johnson paste wax. It was 67 bucks plus tax and shipping on ebay. I'll only use it on my guns so it should last a while. I'm going to try some of that _Red Line_ red moly grease you use too.
@GoodLuckAmerica Did you find out the metal used on this Lever Action Rifle? That is very odd the Gun Manufacturer doesn't have an answer for you on what they make their product with.
Pull the buttstock first ' then pin the hammer spring with the hammer all the way back ' it takes pressure off hammer then the saddle ring post will go right in ' if you dont its almost impossible.
I like your D.I.Y. vids. Adds another aspect to your channel, and changes things up a bit for different interests. Good vid. Nice Rifle also. Keep on keepin' on...
Any time you r matching screws put the threads together like 2 cogs would be and make sure your thread pitch is the same so u don't mess up your threads also a set of calipers r handy to check diameter ( recommend Sterrett or mitotyto will last a lifetime if u take care of them) and all bolts /screws should be able to hand tighten until the last couple of turns should never have to force it 6mm is very close to 1/4-20 threads easy to confuse if ur not careful just a machinest tip.
There's nothing like seeing some cowboy in the movies sliding their lever action into the scabbard on their horse. (It probably isn't the best or most comfortable for the horse, but. I always liked when when the rifle is slid under the rear side of the saddle. ) I used to have a rear sliding scabbard set up for a short lever action (It's called a "mares leg") on a pan head I used to own. Nice job tricking out your Rossi dude. 🫵😉👍
End of you video had buble water Ru Paul drag N queen 30 minute commercial. The only correlation between it and you is that the person being interviewed is from Texas. I watched as long as I could before stopping it. Hopefully they'll give you a nickel.
I wonder how close the specs are between your new rifle and my old amadeus rossi? I had to replace the ejector a while back and had to get one from a winchester model 92 and whittle it down to match the old one. It was rough going and definately NOT inexpensive!
We all need to stop watching Boomers do things we wish we could but will never have the $ to do so BECAUSE THE BOOMERS SPENT IT ALL. F these guys.
lol, bitter or angry much.. yea working your entire life, saving and not being an idiot expecting everything for free pays off. Perhaps you should try it instead of crying and blaming others for you failure. 🌈🍼😿
Keep blaming others for you pissing away your money, see how that goes for you.
If you got a job you could afford things.
Rick don't get me wrong nothing is for free but when everything gets more expensive and the job doesn't pay more you get angry at people. I get angry at the government. Here in Austria the taxes are brutally high.... I know we dug our own grave but if you always vote for less government and you get more government you get angry at the people. My dream is to have a house like you. (and some kids, and a wife). I know I talk a lot but our government is talking about disowning houses.
I already work 60 hours a week as a Ironworker and work out but it get frustrating, because you will never get the dream. I am 19 years old and if I look at the western economy it for sure won't get better.
Rick may be a boomer technically, but I've been watching him for some time and he doesn't run around shitting on us younger folks, unless you are a lazy bum that votes lefty and bitches that no one is handing you money to weave underwater, rainbow baskets..
I wrapped leather around my lever. 4 years later, I took it off. Found rust under it. I hunted with it, so probably from moisture. I learned something there.
I usually have mine wrapped with camo tape for protection but take it off every few weeks and give everything a clean. Eezox for the metal and renaissance wax for the timber.
You gotta have a leather sling for that pretty rifle Rick! No cheap nylon strap after all that work you've put into improving that rifle!
Love it Rick ! You gave your Rossi a bit of a “Finished “ look with the saddle ring, makes your rifle look more authentic. I’ve always been a sucker for saddle rings.😊 Well done ! 👍 Looking forward to tonight’s Live. See ya at 7pm Texas Time 🤠😉.
I've always liked lever-action rifles. You keep showing these videos of that beautiful rifle, and now I wanna get one.
Some live in fear of the inevitable collapse of humanity.... other's prepare for the inevitable, and make sure to have all the proper tools on hand.....
Mr.Gore U R A National Treasure.
Lube, thats whats was missing, Lube!. What were you hiding from us in the crotch area? Does that happen often? You may need a massage appointment for that if it doesn't go away after 4 hours.
Very pretty rifle 😊
Rick, A quick check for bolt compatibility. Put the threaded ends together to check size then if that’s good flip one bolt over ( like one head north the other south) then mate the threads together. If they interlock it’s the same thread pitch, and you’ll never mess up the interior threads.
*Tip:* When you want to see if the threads are the same pitch use one thread as a gauge for the other by trying to engage the points of one thread into the groves of the other. If the threads engage then they are the same pitch.
If the threads are the same pitch then you check to see if the screws/bolts are the same diameter.
Good series on customizing and improving upon this already cool rifle.
I bought a can of SC Johnson paste wax. It was 67 bucks plus tax and shipping on ebay. I'll only use it on my guns so it should last a while. I'm going to try some of that _Red Line_ red moly grease you use too.
You have so much history of housemship just love it
@GoodLuckAmerica Did you find out the metal used on this Lever Action Rifle? That is very odd the Gun Manufacturer doesn't have an answer for you on what they make their product with.
Very nice rifle, good techniques for installing and rust prevention.
Pull the buttstock first ' then pin the hammer spring with the hammer all the way back ' it takes pressure off hammer then the saddle ring post will go right in ' if you dont its almost impossible.
That's One Good Looking Rifle!
Think you might find this link interesting Rick.
I like your D.I.Y. vids. Adds another aspect to your channel, and changes things up a bit for different interests. Good vid. Nice Rifle also. Keep on keepin' on...
You da man Mr. Gore!!
Nice job! Outstanding.
Good morning and great weekend to you and your family.
Good morning!
The blur makes it look like you weren't wearing pants, lol.
Cordovan Shoe Polish. Cordovan is Spanish horse hide leather
Looking great
Any time you r matching screws put the threads together like 2 cogs would be and make sure your thread pitch is the same so u don't mess up your threads also a set of calipers r handy to check diameter ( recommend Sterrett or mitotyto will last a lifetime if u take care of them) and all bolts /screws should be able to hand tighten until the last couple of turns should never have to force it 6mm is very close to 1/4-20 threads easy to confuse if ur not careful just a machinest tip.
There's nothing like seeing some cowboy in the movies sliding their lever action into the scabbard on their horse.
(It probably isn't the best or most comfortable for the horse, but.
I always liked when when the rifle is slid under the rear side of the saddle. )
I used to have a rear sliding scabbard set up for a short lever action (It's called a "mares leg") on a pan head I used to own.
Nice job tricking out your Rossi dude.
🫵😉👍
@Paul Getty
Lol. Yup...
Definitely could use a leather cuff stock shoulder buffer to match the leather loop lever cover.
Very nice, good to go when the zombies come.🤠
I ride with my Henry in a scabbard. I might see if this is an option for me. I do like the leather wrap on the lever though.
End of you video had buble water Ru Paul drag N queen 30 minute commercial. The only correlation between it and you is that the person being interviewed is from Texas. I watched as long as I could before stopping it. Hopefully they'll give you a nickel.
I wonder how close the specs are between your new rifle and my old amadeus rossi? I had to replace the ejector a while back and had to get one from a winchester model 92 and whittle it down to match the old one. It was rough going and definately NOT inexpensive!
Where did you get the saddle ring and bolt? Post 64 win 1894?
I’ve never seen Johnson wax with out the coat hanger on it.
Rick, have you been to Ranger Point Precision and checked out their R92 tactical parts.
Get rid of the Johnson paste wax. Get some BRIWAX Original clear. Does an amazing job on wood and metal. Perfect for a firearm. Best you can get.
You treat it with TLC nice
Where did you order the ring from?
Hey Rick, cool videos on the rifle. Makes me want to look at one. Are you going to do a shooting video with it?
you should have a rifle vice or holder
Where did you get the saddle ring from? looks great!
Stevesgunz sells them along with stuff to remove and block off the bolt safety.
Nice!
What time is the live chat tonight
Mam i really love this rifle wish I could have it in Australia 🇦🇺 regards riono and rubydo
Great looking rifle. Love the history of firearms, shame I live in the UK where pepper spray is classed as a firearm. 😔
Nice 👍
Thanks ✌
What time is is live chat tonight
hi
Can you add a saddle ring to a Henry bbx?
sure
A very nice rifle 👍45 LC 44-40 ??
357
Stainless saddle ring…but waxes it so it won’t rust ….
another smart dumb guy on the net, thinks stainless does not rust... smh
First
You made it look a hell of a lot better than it did 💨 let's go shoot some cans
Hey Rick. What's your experience with surplus ammo?
buy it cheap
👍