The outer case was rusted badly so it looks like it was wet at some point. It's surprising the component damage and corrosion was not worse. Looks like the owner doesn't realise water and electricity are not compatible ;-)
Might be it was installed in humid area or the sealing rubber had some issues which was causing to enter water in car body Because its corrosion wss on cover facing to car body and it wss iron sheet Its top side was beautiful with attractive nickel plated design sheets
might be it was installed in car body having humid area, might be any sealing rubber is leaky or some similar sonario, its bottom cover was simple iron plate, it is corrosion friendly in humid area
The outer case was rusted badly so it looks like it was wet at some point. It's surprising the component damage and corrosion was not worse. Looks like the owner doesn't realise water and electricity are not compatible ;-)
Might be it was installed in humid area or the sealing rubber had some issues which was causing to enter water in car body
Because its corrosion wss on cover facing to car body and it wss iron sheet
Its top side was beautiful with attractive nickel plated design sheets
Flood damage ?
@@gmtoolman67 from the dirt residue on the PCB that's what I also thought of aka flood damage
Very nice repair of the transistor leg! I love the loop technique you used. 😊
Thanks a lot 💕
Thank you so much. God bless you.
Have a great day 💞
Salam Aleikum Si Achraf, as usual, very informative lesson. Thumbs up !
Wonderful video
Excellent thanks for sharing this informative video keep sharing❤❤
It is my pleasure 💕
Good
Assalamwaalikum sir please expline about offset voltage
Would you rather test with a sine wave?
I use sine wave
Square wave and triangular waves
To see amplifier linearity
Then apply different frequency to check its band filters
Sar DC offset kya hota hai uske bare me thoda bataiye.
👍👍👍👍subtitle please
Did the owner keep this in his car, or bury it underground?? That board is terrible! 😂
might be it was installed in car body having humid area, might be any sealing rubber is leaky or some similar sonario, its bottom cover was simple iron plate, it is corrosion friendly in humid area
Aleykümselam ve rahmetullahi ve berekatuhu.Türkçe alt yazıya ulaşamıyorum. Ekleyebilir misiniz.❤❤❤🙏👍
Yessss !! 🙏
❤👋🙏🙏🙏🙏