Welding Stinger. T-300 vs V-Stinger
ฝัง
- เผยแพร่เมื่อ 20 มี.ค. 2018
- To me I love them Both but here are a couple thouhgts I have on both. Plus I need a new one anyway.
www.schofieldwelding.com
schofieldwelding@gmail.com
instagram schofield1990
facebook Jacob Schofield
facebook Schofield Welding - ตลก
One thing I like to do that you didnt is, i shorten the thumb handle too. I cut about an inch off and get a rubber sleeve from a 1/2" ballvalve. That will keep it from arcing off stuff. I shorten my handle about the width of my palm tho. And as mentioned, get replacement parts man, $10 spring or less, is cheaper than a whole stinger that still has life in it. But I been wondering how those spring steel wedges been holding up. I been waiting to order them. Was hoping for a review vid.
I've been thinking about changing the stinger on my everlast stick welder. I will have to check those ones out.
I keep finding stingers in my shop that are older than I am. I bought my uncle's place and he left me an Airco 3-A welder and the stingers were probably from that.
LOL, the guy that sets himself on fire for a living afraid of a busted knuckle! Great video, I will have to check out one of those stingers, thanks!
Our hands and eyes are everything.
That guy strong asf he bend the rod around the stringer quick asf
I have 3 of those stingers you have on my leads they work great and last long time keep on welding brother be safe
Sergio Ramirez there great stingers
Martin Wells stubby stingers are my go to! You ought to try them. I know the youngsters don't like them because they weld so cold they stick the rod and can't just squeeze to let the rod loose.
Keep up the work man love the videos
I use a victory400 twist stinger they last me a good few years of abuse, and can handle 5x400 316l's takes about 20 rods until it gets to hot to handle..
stinger v also sells replacement springs in packs of two
Great stingers. I put quick connects about 20 ft down my hot lead. That way when need to do a little tig welding I can break out clamp style lead to hook to quick connect for power block.
Hope you enjoyed vacation!
Danny Harvey loved the vacation man great to see the family
Live my stinger V, but I did have to re-insulate the thumb release. She chipped that black coating off pretty easy and arc'd out a time or 2.
I keep that and my 400amp Bernard on the rig handy all the time.
Keep up the great videos and have a great day brother.
RCRCustoms valve handles work good too or a bunch of shrink wrap.
Jacob Schofield I was looking for some heavy shrink wrap and one of the electrician on the job handed me some bonding tape and it worked flawlessly.
valve spring out of an SA200 works if you lose that spring, also ive used I think it was 2/0 heat shrink to replace those spring insulators and help insulate the handle better..and after all that if you really wanna extend its life, when the V gets worn down from rods just build it up with some silicon bronze... and use a triangle file or jewelers file if you add to much to it. ive only bought one Stinger V in the past 10 years of real welding. the other thing about those t300 is they are good if you wanna switch polarity or if your demagnetizing pipe!
ecr125x dude those stinger V are some serious stingers they last forever
My stinger v is being difficult on 3/32 rods lately
What size whip cable do you use on the Stinger V, and where do you get your welding caps from? Thanks.
Bad ass bro thanks for showing the difference between the stingers! Were you about to take a test?
Love my stinger v. Don't think I could ever go with out one again
Just a question. Why wouldn't you use a ground? Why using a t300 as a ground?
What kind of leads do you use?
Love my stinger v insulated version. Springs and insulators are replaceable as well
Tweeko 200amp. Best for distribution
I want to try one of those v-stingers on my powerarc welder.
cable specifications please
Been using the v stinger but it keeps overheating and burning my hand so I’m wondering what kind of leads you are using?
What size cables are you running for your stinger and ground? I’m a welding student in NC and I just bought a SA-200 and need to replace the old leads. Thanks for all the great videos!
Hey i just started with my first company and plan to go take my structural welding test soon we weld with 5/32 7018 but im already looking to go further and eventually want to become a pipe liner and plan to go to Tulsa welding school in Jacksonville Florida but idk where to even start looking for pipe lining jobs, im just trying to form a career path and was wondering if you had any tips on where to look for boiler maker or pipe liner jobs
@@johndowe7003 🤑
What do you do for a clip on for a tig rig using a V? Ive been stuck with a standard ol twick because I stick and tig
crackerjax27526
I keep two whips. One with a V and one with a regular clamp type so I can clamp on to a power block. You can also buy a power block with a cable connector bolted to it so you just have to put the cable connector on the end of your lead straight on to it. It also has a rubber boot that goes around it so there's not an exposed power block.
You can always weld I little round stock on your block for somewhere to hook you too
I prefer to crimp those lugs on.. that copper turns solid when crimped properly.. and as a repeat job, keeping a ring spanner handy will save his knuckles.
Where’s this cap from?
Never had a rod to flip out of a 300 !
They come with a replacement spring and and insulators at least mine did
man mine didnt i need to buy the extra pieces.
3 weeks running rod and the v is rounded out. When u bend the rod to another position it just twills around. But at 1st use it clamps great till then.
Mine does same. Fine with 8th in 60s but I go to cap with my 3/32 7018 and rod just flaps around.. pretty much useless for code quality work because I've literally been burning and rod slipped and arcd on pipe and that's unacceptable in my field
@@chrisjones6165 That's unacceptable in any field, and a pain in the ass!
Hey jake i put a Heavy terminal lug on my stinger v
Hey Jake can you do a video on welding lead size preferred in the field? looking to invest in my own whip
Jake I run #1 lead for 125 feet on my stinger and 125 feet on my ground
Thank you Schofield welding!
What whip cable gauge do you use in that Stinger V? Thanks.
I use #1 lead for both sides 125 feet on each
My v-stinger kicks the rod out when I’m welding like it wasn’t clumped down right in the stinger properly
👌Perfeco men🤗
you can use a "crimper" for your lugs
Don't mash the copper terminal, use a ferrule and/or solder the cable inside the terminal.
What do you think of the pistol grip type stingers? The kind where you twist the head and stick the rod in and then twist to tighten?
thebruteforce1 takes to long in my opinion to have another rod loaded.
if you are new to welding and stick the rod, you cant get the head untwisted fast enough
As said above, they take too long to change rods and if you’re on a job where arc burns will get you fired, and wiggling a stuck rod loose will sometimes make you arc burn on the material-they’re too much trouble to take off of a rod when it sticks.
I used one on one occasion and said never again.
What is it called when you strike the pipe with just the stinger and it arcs?
I call them shiners lol not sure really what they are called haha
Jacob, what are the prices on both stingers?
Hector Perez 80.00 for a stinger v and 55 for a t-300
Well the car was behind me with a V stinger taking photos of me 😭
If you just used the proper tool, in this case a box wrench, you would not bust any knuckles. Also, I'm surprised you guys don't solder the stinger lug on. Does the cable work loose?
Hey Jacob,
Why do pipeliners use a stinger for a ground clamp?
So you can go to reverse polarity with out having to switch leads on the machine
Because stingers are always free from the contractor and ground clamps usually aren't.
love my T-300 cause i can use 1/4 carbon rods to heat stuff up
u can temper the spring again
Ryan Allen I should hug that’s a great idea.
You can get a replacement spring for those so you don't have to keep buying a whole new stinger.
Alex Bergey nothing better than a new one tho
I should get some extra parts for it.
Sure can! Check their site or call stingerv.com. They got a few replacement kits.
@@JacobSchofield it's easier to buy a new one so you dont have to "mechanic". Get a ratchet and socket so you dont bust your knuckles when you take apart the lug and put it back together. Lol and it will help prevent stripping the nut..
0:25 easy as fuck to fix those on the fly. All you need is a k type thermocouple (like $30 tops), a can, some lead, a torch, and an oil bath.
*STEP ONE IS SET UP OUTDOORS*
Lead fumes are a class "don't fuck around" hazard. Put a soup can on something that won't burn then fill it with lead. Next remove the spring (usually it's just 1-2 screws/1 rivet) and hit it hard with the torch. Get it glowing hot and keep it there for a good minutes or two, then let it cool down completely in open air. Its now renormalized and free of internal stresses.
Next you're gonna wanna melt the lead in the can, and drop the thermocouple in there. 750°f is your magic number for a strong spring. Throw it in the lead (which is there for even heating so ya don't get weak spots) and let it stew a while, say 5 mins or so. Then just pull it straight out and drop it in some old motor oil. Boom, factory fresh for $0 and maybe 3 minutes actual "work".
But you do you boo, I'm just weird when it comes to stuff like this. Don't fix it if it ain't broke and have a go if it is. Ya only need a new one when "royaly fucked" is applicable 😁
Why do you cut the wire instead unbolt the terminal and mount in on the new one it Saves the copper. And if the copper is only black near the end, it has probably something to do with the way u attach the wire to the terminal.
its just the way ive always done it. y\usually by the time they need replaced that last foot or so is pretty rough.
I got an insulated stinger v that's pry a year old been used somewhat.. never professionally so pry 15hrs a week and I use 8th in 6010 and 3/32 70s so id say 75to95 amps and it won't hold a 3/32 rod for shit anymore. For the price and amount of use I expected more personally.
I totally get it... there not cheap for sure. I since have switched to an optimus 300 it’s made in Holland and that thing is amazing
@@JacobSchofield I'll look into it, thank you for heads up
That stinger is a ground clamp lol
yes sir been using a t300 for almost 11 years and have had zero problem.
stingers are contractor supplied lol
G Loyd I am the contractor lol
I use tweecos because they are free
Enough said!!! If there supplies use em up!!
What’s your opinion on magnetic grounds?
read the small print.. you have to ensure that the contact bolt in the middle has a clean surface.. it's the only thing going to ground.. the magnets just hold it there.. .. fine for sheet work where there's no edge to clamp... but for the workshop, weld an M20 bolt head to the steel table and clamp on that
Jake, don't throw away that V stinger... parts available ( www.plwelder.com/store.php/products/stinger-v-spring )
Be safe and enjoy!!!
Ya those stinger are crap bin doin this 50 years twist lock only way to go tighten it up and shorten up good to go
How come you dont use bernard short stub stingers? They're the cat's ass, as far as I'm concerned. But that's just my opinion.
What happened to JED? did he break out as a welder?
Smiley G oh yeah he’s welding now.
It's great Jed broke out! Nothing like family helping family. GREAT job teaching!
The v is good but too big. Especially tight spots
Yes your right for sure.
Ha ha throw it in a vise!
I do a lot of wiring and the best way to do a big 2/0 plus terminal like that without a proper crimper is to Put the wire in take something with a chisel Tip. Use that chisel to make a crease right down the center of it length wise till the end you chiseling is touch the other end it will be in the shape of a B at this point then put it in your vise and close that crease up so it’s a tighter B. You get good enough at it. It looks and performs better then one that’s been done with just a crimper
LUG = Lesbian Until Graduation (courtesy of Smith College Student Handbook)
It's called a "Ring Terminal" bub. I can most definitely tell you dont like you no mechanicn'. 🤣
And I can tell your no English Teacher 😝 have a great day.
You dont want to waste lead so take the stinger apart another fuckin 7 inches
Gavin Boucher why? It’s all cooked up there.
I love you videos but yeah kids today you got no clue.. twist lock.. use it learn how to use it can't beat it
Who wants to count the saftey violations?
Count away little lady...
You forgot to idiot proof the video and say unplug the lead first.