I have the exact same setup except a TL10V2. I used trampoline safety net with butyl tape to keep the shavings out of my belly pan. I put them on every air flow opening. It didn’t change the temperature of the machine running all day. I did it after the first ten hours after I bought it. It helped tremendously. I bought a Takeuchi and a Fae based on this video. I am absolutely glad I did. Thanks for the review.
first time running a Skiddy this past weekend on my hunt lease, truly amazing machines what they are capable of. We had a Bush Hog attachment and the bucket, with the bucket we cleared about an acre and a half of trees and brush for a foodplot in under 4 hours with stopping for water, lunch etc. When I retire and get my farm I will most definitely be investing in some type of skiddy for the sheer versatility of them.
Great 100hr review Samson Andrew😂. Interesting about the small fuel cell. I think my 080 is about 30gal. I burn about 1/2 to 3/4 of a tank in a day 5-7 hrs of run time. At 4gal per hr you must be fueling twice a day? Jim has been very nice to deal with, and he even offered to drive up and look at the projects I have now and the few I’m looking at, to see if a TL12R would be a good fit. I’ve started on the Farmhouse project, so the ranch is now playing second fiddle. Thanks again for sharing, always enjoy you videos👍👍👍
I wasn't so sure about your decision to go with a take-your-hoochie, but the more I see you guys work the thing the more I like it. How boring would life be if everyone liked and bought the same machines. Regardless, with the top 3 you listed there can be no bad choices. Awesome vid as always!
Sam - Keep an eye on the door rollers. Dust/dirt/etc. can jam them causing them to roll on the door pins instead of on the channel. We just replaced the entire door on out TL-8 (2015 I think) due to "operator error" The pins for the rollers are welded to the door frame. Was going to only replace the glass, but when we pulled the door, there was just about nothing holding the bearings. Replace the whole thing + bearing = $$ and ^%@$ !! Keep safe
Good info, I don’t know much about your equipment, but I like your your honest reviews, but I am learning! What man doesn’t love heavy equipment! Maybe you can show how things work as you run it?
Thank you brotha, I really appreciate your videos and honest feedback. Any advice on purchasing a New TL12V2 this weekend to start a New Business? I appreciate any feedback or advice. Thank you all
Thank you for your honesty I like your videos you Kick ass!!! If you dont mind what set up Mulching jead like what model on the cutters? I did bought me a TL12R2. And looking to get the mulching head. But I dont know the cutter set up.
How'dy, I follow a lot of utubers that do the same as you around the country, and most prefer that machine hay if it does what you want then buy it, thanks for the video Peace
I tried ASV and CAT both brand new last year for a couple of days each. I did not really like the ASV ( rt65) . Cat 257d for me wins hands down. Far roomier, quieter and smoother. Industrial setting on soft ground though, not forestry.
I'm looking at the exact set up. So far do you have an average of how much production can you get done in 1 day? 1 acre a day in light brush and small trees? I'm in. Central IL most of.my work will be field edges and clearing timber understory etc.
I have the same setup with 500 hrs no issues except they put tl 10 tanks in some of them only holds 20 gal not the spec 32 gal. Can never make it thru the day without refueling 2 times.
Truth is an ephemeral thing. What you tell us is your unvarnished exact experience to date. Could change tomorrow. Could be the same years from now. Keep making videos for us to enjoy and to learn from.
Sam, Did u ever look at John Deere? Or stayed away since u were using them for forestry mulching? I am looking at a Takeuchi 12R and got a quote from Global, but also got a quote on the Deere 333G. I’m mainly using it for construction and dirt work with some brushing work. Both machines seem pretty comparable. One thing leaning me towards the Deere is the service, I live in Sonora and they have service trucks an hour from me if I did have a problem, haven’t heard of service trucks for Takeuchi? Let me know what u think on this! Thanks, love the videos!
Jared Van Bolt globlal has their own service trucks if you need them. I never looked into Deere. Not many have mulcher on them from what I’ve seen and ones I saw were all burnt down
I was watching an earlier video about the blow by on your 5.9 common rail, and heard you say you went to school in Laramie, Wyoming, did you go to WYOTech? I’ve been considering that school for diesel mechanics and wanted to ask how the school was
yup wyotech. its a good ice breaker kind of a starter if you have no idea what youre doing and want to learn the trade but it is very expensive and if you have basic knowledge of a diesel most of what the teach you already know. don't get me wrong I learned quite a bit but idk about 30k worth. maybe ill do a video on the subject or find me on Instagram and we can talk more if youre very interested. Samson_andrew_
Here in my area JD is about 30 min. from me. Cat, Kub., Bobcat are about 1-1-1/2 hours and Tak. is about 2-1/2. So going with this which one would you be looking into? I don't know about any of their Custer mer service as I've never had any dealings with any of them. Thanks for the reply. I enjoy all of you videos. Take care and be safe.
@@jayg479 I like the way the door opens on a Takeuchi. It rolls open. On the Cat and Bobcat the door swings open, so they could be broken easily. I think you can also operate the Takeuchi while the door is open.
mind me asking what you paid for a set of those couplers? what are the threads like? also is there caps for when the attachment is off id be worried about the threads getting mashed
Walsh and Sons Excavating dad is redoing the under carriage. Redesigning the track support and building new ones. It’s almost done. I showed it in a video like two back I think. We are ready to have it back in the game need it on a few bigger jobs ahead
V-BELT and SON I'm from Florida and kubota service department ain't the best but the sales department is dang good. I have 95svl2 and love it and I've ran them all. Kubota is coming out with a 120hp forstery machine early next year
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
I have the exact same setup except a TL10V2. I used trampoline safety net with butyl tape to keep the shavings out of my belly pan. I put them on every air flow opening. It didn’t change the temperature of the machine running all day. I did it after the first ten hours after I bought it. It helped tremendously. I bought a Takeuchi and a Fae based on this video. I am absolutely glad I did. Thanks for the review.
first time running a Skiddy this past weekend on my hunt lease, truly amazing machines what they are capable of. We had a Bush Hog attachment and the bucket, with the bucket we cleared about an acre and a half of trees and brush for a foodplot in under 4 hours with stopping for water, lunch etc. When I retire and get my farm I will most definitely be investing in some type of skiddy for the sheer versatility of them.
We just bought one out here in Georgia and turning it down to 95% really helped Thank you for your review it helped making a decision on purchase
Good review Sam ! Those skid steer a Handy to have...👍🏻
Can't beat that drone footage!! Great video.
Great review man 👍 I appreciate the honesty 😎
Great 100hr review Samson Andrew😂. Interesting about the small fuel cell. I think my 080 is about 30gal. I burn about 1/2 to 3/4 of a tank in a day 5-7 hrs of run time. At 4gal per hr you must be fueling twice a day? Jim has been very nice to deal with, and he even offered to drive up and look at the projects I have now and the few I’m looking at, to see if a TL12R would be a good fit. I’ve started on the Farmhouse project, so the ranch is now playing second fiddle. Thanks again for sharing, always enjoy you videos👍👍👍
takeuchi and kubotas are the best and reliable products plus there both build in japan
Nice opening! And people say men can’t multi-task!
I’d say that was a trustworthy review. 👍🏻
I wasn't so sure about your decision to go with a take-your-hoochie, but the more I see you guys work the thing the more I like it. How boring would life be if everyone liked and bought the same machines. Regardless, with the top 3 you listed there can be no bad choices. Awesome vid as always!
Sam - Keep an eye on the door rollers. Dust/dirt/etc. can jam them causing them to roll on the door pins instead of on the channel.
We just replaced the entire door on out TL-8 (2015 I think) due to "operator error" The pins for the rollers are welded to the door frame. Was going to only replace the glass, but when we pulled the door, there was just about nothing holding the bearings. Replace the whole thing + bearing = $$ and ^%@$ !!
Keep safe
Cat🙌🏼🙌🏼🙌🏼🙌🏼😎 Takeuchi would be my 2nd pic for sure
Watching your vids is really making me want to test out a TL12R2!
Good info, I don’t know much about your equipment, but I like your your honest reviews, but I am learning! What man doesn’t love heavy equipment! Maybe you can show how things work as you run it?
Thank you brotha, I really appreciate your videos and honest feedback. Any advice on purchasing a New TL12V2 this weekend to start a New Business? I appreciate any feedback or advice. Thank you all
Looks like you just had a subscriber bump, congrats. Picking up a 10K tilt trailer Friday, partly inspired by watching your vids. Keep at it
go to the second screen in the dash for a digital read-out for your temps so you know exactly what they are
Thank you for your honesty I like your videos you Kick ass!!! If you dont mind what set up Mulching jead like what model on the cutters? I did bought me a TL12R2. And looking to get the mulching head. But I dont know the cutter set up.
How'dy, I follow a lot of utubers that do the same as you around the country, and most prefer that machine hay if it does what you want then buy it, thanks for the video Peace
I tried ASV and CAT both brand new last year for a couple of days each. I did not really like the ASV ( rt65) . Cat 257d for me wins hands down. Far roomier, quieter and smoother. Industrial setting on soft ground though, not forestry.
I'm looking at the exact set up. So far do you have an average of how much production can you get done in 1 day? 1 acre a day in light brush and small trees? I'm in. Central IL most of.my work will be field edges and clearing timber understory etc.
try putting a pre-cleaner on it .. makes all the difference with your temps
Dealer support....All the way plus u have there a darn good machine a roona... Yep
I have the same setup with 500 hrs no issues except they put tl 10 tanks in some of them only holds 20 gal not the spec 32 gal. Can never make it thru the day without refueling 2 times.
Truth is an ephemeral thing. What you tell us is your unvarnished exact experience to date. Could change tomorrow. Could be the same years from now. Keep making videos for us to enjoy and to learn from.
Just hit 100 hours in my TL12 and the stock couplers sure like to leak! Do you have a link for the aftermarket couplers? Thanks!
Sam,
Did u ever look at John Deere? Or stayed away since u were using them for forestry mulching? I am looking at a Takeuchi 12R and got a quote from Global, but also got a quote on the Deere 333G. I’m mainly using it for construction and dirt work with some brushing work. Both machines seem pretty comparable. One thing leaning me towards the Deere is the service, I live in Sonora and they have service trucks an hour from me if I did have a problem, haven’t heard of service trucks for Takeuchi? Let me know what u think on this! Thanks, love the videos!
Jared Van Bolt globlal has their own service trucks if you need them. I never looked into Deere. Not many have mulcher on them from what I’ve seen and ones I saw were all burnt down
I knew Cat had an issue with catching fire, does Deere have that issue as well?
You guys need to check out a Green Climber ! Perhaps add that to your kit .....
Not sure what that is
@@VBELTandSON Remote controlled Muncher on tracks sore one today cutting fire breaks here in sydney Australia can handle up to 60" degrees in slopes.
@@VBELTandSON th-cam.com/video/f_8w2GHWWbo/w-d-xo.html
I was watching an earlier video about the blow by on your 5.9 common rail, and heard you say you went to school in Laramie, Wyoming, did you go to WYOTech? I’ve been considering that school for diesel mechanics and wanted to ask how the school was
yup wyotech. its a good ice breaker kind of a starter if you have no idea what youre doing and want to learn the trade but it is very expensive and if you have basic knowledge of a diesel most of what the teach you already know. don't get me wrong I learned quite a bit but idk about 30k worth. maybe ill do a video on the subject or find me on Instagram and we can talk more if youre very interested. Samson_andrew_
U work hard....make time for fried chicken....it will put a smile on your mulcher..🙉
When you find something that works for you, stick with it.
Also I was wondering what model of fae mulching head are you running?
You said the ASV was more than this. I believe 20k. How does the Cat 299 fall into the works? Also how far are you from Global Machinery
Cat is crap and costs more than all of them. Hour ish drive
Here in my area JD is about 30 min. from me. Cat, Kub., Bobcat are about 1-1-1/2 hours and Tak. is about 2-1/2. So going with this which one would you be looking into? I don't know about any of their Custer mer service as I've never had any dealings with any of them. Thanks for the reply. I enjoy all of you videos. Take care and be safe.
@@caseyjones6197 Hoooooooow bout ya there Casey Jones.....
Thats a Takeuchi!!
I think Cat is so popular is the dealer support and they have dealers all around the world. Did you ever look at Bobcat?
I didn't like cat until I got a new 299d2. I was a did prefer bobcat but not anymore.
@@jayg479 bobcats visibility sucks
Older pre emissions have good visibility. Visibility on new cat isn't great either.
@@jayg479 I like the way the door opens on a Takeuchi. It rolls open. On the Cat and Bobcat the door swings open, so they could be broken easily. I think you can also operate the Takeuchi while the door is open.
I went from open cap Bob to closed cab cat. I agree door sucks bad.
mind me asking what you paid for a set of those couplers? what are the threads like? also is there caps for when the attachment is off id be worried about the threads getting mashed
depends on who you get them from found these on ebay at different times but 200 ish a set
okay ill have to check it out thank you
@@VBELTandSON hey do you know if those mirrors are spoken for from your new video? if not ill place an order now
19,079 subs heck ya
Jay G it’s growing!🤘🏻
Sam my family run all cat equipment that my like to run and they are on slode machine too run.
Those quick connects work for a T770?
Bobby Alquist yeah I’m sure. Just have to get adapter to fit your hydraulic block. Worth the conversion
I don't no why but you tube thinks I forgot about you if I don't watch a video
what happened to your primetech?
Walsh and Sons Excavating dad is redoing the under carriage. Redesigning the track support and building new ones. It’s almost done. I showed it in a video like two back I think. We are ready to have it back in the game need it on a few bigger jobs ahead
V-BELT and SON gotcha, looked like quite the surgery!
I see you like kubota why not a 95svl2
dealer support around here for Kubota is the worst. sad but true and really wish Kubota had a little more hp
V-BELT and SON I'm from Florida and kubota service department ain't the best but the sales department is dang good. I have 95svl2 and love it and I've ran them all. Kubota is coming out with a 120hp forstery machine early next year
Keith Settles he’ll yeah looking forward to seeing that machine when it comes out
V-BELT and SON me to keep up the good content
First of 3
Dixie Mae whats up ? You running late today....🤷🏻♂️
Better late than never.
Cummins Chevy very true 👍🏻
Viewer 1,386 ,
Not 1....but
TipTop LandSolutions got our call brother! Talk to you later today! Thanks
Also deine Video Beschreibung passt überhaupt nicht zu dem Video . Lächerlich