I was going to mention you but was sure of your name lol i sorry I'm terrible with names so I edit it out because I said Carl and I was sure if it was Carlos or Carl lol. My apologies. Thank you for your support
Bad ass Juan I like this. Very informative! I’m going to save this one . Will you make a video of your jig set up? Do you also put the metal holders for the signs or no?
Thanks for the informative video. For my one of craft project, I am looking to get 4mm coroplast, on Black coroplast sheets, I need to get White color one side. Basically i am looking to get one side white on black sheet. Please suggest. I tried spray paint which goes in to plastic, but the paint doesn't stick. Need a good solution. Thanks
If you were paying 200 dollars a gallon of 7900 series 5 years ago, you were getting ripped off. The only color that was about $130 a gallon was bright red
Great Video!!! Been wanting to do this for awhile now finally understand how!! Question can you use xylene to clean your screens instead of plastisol press wash?
Hey juan! Your drying rack looks perfect for signs.... i've been looking everywhere and cant find anything similar to that. Where did you buy your drying rack?
Thanks for the videos ! Very informative. Do you have a recommendation on what brand and size of screen printing press I should get as a start up making 18x24 signs and also t-shirts ? Thanks
Let research that one and I'll get back to you right now the only one that comes to mind is the M&R genesis is a 4x1 good thing about this press is that you get all kinds of pollets for it
Thank you Juan for your videos. I have a questions, where can i get a cheap printer for the transparency? I dont want to waste too much money on them and any info is great. ....Thank you
What emulsion remover do you use? The xylene and spray-n-wipe are just for the ink right? What chemical do you use to remove the emulsion when you are done? Also for degreasers, do you have a recommended brand? Thank you!
@@LibertyGraphicDesigns Thank you so much for your help and answers! i can't wait to get started screen printing. When you mention to ask for a free sample, do you mean emailing KIWO themselves for a sample? or from like a screen printing store?
@@LibertyGraphicDesigns yes but whitch one do you have. Or would any regular press work to hold the screen. I don’t want to buy the wrong press and it won’t fit my screen. I saw another video you made looks like you used a regular press and added wood to it to make the area bigger.
Nice job! I’ve been watching your videos many times, they are worth it. My question is, do you offer trainings for the beginners? If yes inbox me your contact so we can have deep conversation. Thank you
Thanks so much for the great video. I need to make signs to spread the gospel and advertise a business I wish to start. God bless you please pray for Revival Jesus is Lord He is coming soon.
Well done. This is how screen printing really looks.
Thanks.
Juan is probably one of the best TH-cam screen printers, great video brotha,
thank you brother
Thanks Comadre!!
Hey bro, thanks for the updated video. Love it. I met you at the ISS the other day. I appreciate your insite. You have a good teaching spirit.
I was going to mention you but was sure of your name lol i sorry I'm terrible with names so I edit it out because I said Carl and I was sure if it was Carlos or Carl lol. My apologies. Thank you for your support
@@LibertyGraphicDesigns that's funny. Real name is Carl but I look more Mexican so friends call me Carlos. I answer to both.
@@RenewHopeMinisties lol thats funny
Bad ass Juan I like this. Very informative! I’m going to save this one . Will you make a video of your jig set up? Do you also put the metal holders for the signs or no?
yes I also include the stakes with the signs as well
Thanks for the informative video. For my one of craft project, I am looking to get 4mm coroplast, on Black coroplast sheets, I need to get White color one side. Basically i am looking to get one side white on black sheet. Please suggest. I tried spray paint which goes in to plastic, but the paint doesn't stick. Need a good solution. Thanks
What print did you use? Dtf, uv dtf or sublimation?
$200 a gallon?! Are there cheaper alternatives that you could recommend?
Good information man!?! Keep up with the videos
Great video as usual Juan !!!
If you were paying 200 dollars a gallon of 7900 series 5 years ago, you were getting ripped off. The only color that was about $130 a gallon was bright red
Great Video!!! Been wanting to do this for awhile now finally understand how!! Question can you use xylene to clean your screens instead of plastisol press wash?
Hey juan! Your drying rack looks perfect for signs.... i've been looking everywhere and cant find anything similar to that. Where did you buy your drying rack?
How much does a set up like that cost
Thanks for the videos ! Very informative. Do you have a recommendation on what brand and size of screen printing press I should get as a start up making 18x24 signs and also t-shirts ? Thanks
Let research that one and I'll get back to you right now the only one that comes to mind is the M&R genesis is a 4x1 good thing about this press is that you get all kinds of pollets for it
Thank you Juan ! Does it make any difference on the flutes ? I see there are 18x24 signs with 18 in flutes or 24 inch flute
Thank you for being a great teacher
Love your channel! I find it so informative. Can this same ink be used on mudflaps?
Thank sir, Why such a small mesh count? Have you tried other counts such as 156?
You need high mesh on this inks or they will run out and you'll just make a mess even with a 230
Great Job.
Thank you Juan for your videos. I have a questions, where can i get a cheap printer for the transparency? I dont want to waste too much money on them and any info is great. ....Thank you
Office depot's clearance
Anyone in particular?
@@MasterScreenPrints epson and then get the CIS for your ink tgat way you dont waste too much ink or money on ink
@libertygraphics do you have a video showing you printing the two pieces for the design?
no I don't but its the same design
Ok. About to do my first signs and I will research how to split the print to fit 13x19 sheets.
@@shaunspivey8718 print in tile
Thank you. Keep the videos coming. Set up my account with GOGSG today. Told them it was because of you and your videos and links.
I love your channel so much, you always teach me something new. I do have a question for you, what ink is best to use on denim shirts?
thank you, Wilflex inks will work just fine. Wilflex Epic
Hola juan me gusto el video , y que pintira usaste hay
esta en descripcion del video
Great Job... what range do you charge for your signs?
Great Video!! How many 1 sided 1 color signs can you make with a can of NAZDAR ink?
Thousands I bout the one gallon 6 years ago and still have about a quart left
Juan por que no usas velcro para detener el sign?
como con Velcro? tengo que imprimir los dos lados el Velcro estorbaria
What emulsion remover do you use? The xylene and spray-n-wipe are just for the ink right? What chemical do you use to remove the emulsion when you are done? Also for degreasers, do you have a recommended brand? Thank you!
CCI gem-zyme emulsion remover
@@LibertyGraphicDesigns Thanks for replying! im picking up my equipment and chemicals now! Do you have a recommended degreaser for the screens?
@@Vietnewb. Kiwo 1:20 is very good degreaser
Ask for a free sample that stuff last for ever is a 1 in 20 (one part degreaser 20 part water)
@@LibertyGraphicDesigns Thank you so much for your help and answers! i can't wait to get started screen printing. When you mention to ask for a free sample, do you mean emailing KIWO themselves for a sample? or from like a screen printing store?
Hey Bro... nice work
What kind of screen printer is that? Do you have a link?
What did you load the screen on? What kind of machine do I need to load my screen?
it's called screen press
@@LibertyGraphicDesigns yes but whitch one do you have. Or would any regular press work to hold the screen. I don’t want to buy the wrong press and it won’t fit my screen. I saw another video you made looks like you used a regular press and added wood to it to make the area bigger.
Ink curing?
Where do you get your corrugated plastic sign stock from?
Gsg
Yo puedo usar regular platicsold de hacer camisa en los sing oh necesito una tinta especial ?
Tienen que ser una tinta especial (solvent ink) platisol no trabaja
Liberty Graphic Designs gracias como siempre agradecido
The ink is so expensive now
Hi, what kind of printing paper ?
Where are you located Juan?
Waco, TX
why so much for the ink?
solvent ink is expensive
Juan bro . el Coroplastic es lo mismo q el corrugated
Si es el mismo
These printing materials are not available to people looking to make a gard sign.
Nice job! I’ve been watching your videos many times, they are worth it. My question is, do you offer trainings for the beginners?
If yes inbox me your contact so we can have deep conversation. Thank you
Thank you. Yes I do, send me an email at libertygraphicdesigns@gmail.com
👊🖒 GREAT lnfo.
PLEASE WEAR A MASK EVEN WHEN POURING, BROTHER.
Thanks so much for the great video. I need to make signs to spread the gospel and advertise a business I wish to start. God bless you please pray for Revival Jesus is Lord He is coming soon.
Amen!!
need to wear a face mask bro