Time to make the Murray more of a mud machine. Put the biggest ATV tires in the back you can fit that have a tread pattern good for mud. (25's?) and larger tires up front big enough that the front is a little higher than the back to help prevent plowing in the mud. Here are some possible parts from BMI Karts that you might use: #400110k split locking collar, K260056 front hub, K260058 rear hub, 300175 wheel bearing, RT_7869 wheel bearing. You can get 4 on 4 12" wheels for the rear and 4 0n 4 8" or 10" wheels for the front. Glad you're back.
I have a question and it would be helpful if anyone knows the answer.. My question is why does the pulley shaft on my 5 speed transmission move back and forth if theres anyway to prevent it from doing so I would appreciate you telling me
Hey Todd Jorge here from ontario. i just finished my mtd with 14.5hp and a dual pulley (variable speed). i replaced the old original belts for new ones, the blue color (kevlar i think). original size pulleys on it. top speed on 6th is 16 kms/h wich i dont complaint about it. but something weird happened...the new drive belt only lasted 2 weeks of fun. is it normal? i never went to the mud, only drove it on good dirt road or asphalt. i've seen all your videos so far, and i never saw you trying a BX belt type on your murray. im gonna try a BX belt on mine to find out what kind of behaviour i get and also how long will last. if you have any clue of what it caused the belt to start slipping and tear, please let me know.
Turns wheel back and forth but front wheels do not turn. How long you been doing this ? Tighten up that steering. "Ive always got a knife..but its in the truck" lol.
Its good to see the Murray running again. Love the trail ride videos. Question, If I were to make a run to the east coast with Keizer for some trail riding, would you be able to point me to a few peeps that can help set up a few group rides?
I recon you should put a snorkel on it again but have the air filter just where it is currently. Route it up just in front of the steering wheel through the bonnet. Might give you enough height to dodge water getting into the system
A frenco coupler.2-45° sweepa glued together to form a long sweep 90,a short stack up through hole through hood.and a clamp on air filter...weld small flatbar upright behind assembled snorkel and hose clamp it to flatbar in several places.shove filter down onto pipe once hood is closed..a 90 el cuts the airflow by almost half which would be fine if you were using say 2.5" id abs pipw instead of the 1.5"-2"ish needed to fit carb throat..
A don’t think it needs bigger tyres keep the size 20s but instead of 20x7x8 you should definitely go for 20x12x8 or 20x10x8 more traction in the hole surface rather the cutting into them
It's time to put a little bit bigger aggressive tires on that Murray and get rid of them little weak ass tires. My Murray does so much better than that
Them old craftsman body styles are gold. Been looking for one forever. Send'er all the way!
Its good to see you on the trail, thanks for posting.
The Murray is great! But my all time favorite is the Sears. It makes my day.
Time to make the Murray more of a mud machine. Put the biggest ATV tires in the back you can fit that have a tread pattern good for mud. (25's?) and larger tires up front big enough that the front is a little higher than the back to help prevent plowing in the mud. Here are some possible parts from BMI Karts that you might use: #400110k split locking collar, K260056 front hub, K260058 rear hub, 300175 wheel bearing, RT_7869 wheel bearing. You can get 4 on 4 12" wheels for the rear and 4 0n 4 8" or 10" wheels for the front. Glad you're back.
glad the murray is back in the mud!!!!!
Glad to see another video please upload more
good to see you back in the mud again, can't wait to see more..
Great ride! Nice to see the murray finally
You should bring your dynamark up with them
Craftsman Crusher I’ve talked about possibly doing that
Im so happy that the murray is back and it did awesome
¹¹¹²1
Nice 👍🏼 man I’ve missed your off-roading videos
You should do a review of the v twin engine because I’m thinking about getting one for my 1976 Murray mower
@fearlessfront for the snorkel you should use a 90 degree elbow then but the filter on top
Waht‘s wiht the Mini Mudmower?
I just got a 1984 Montgomery Ward lawn tractor, I NEED to do this to it.
Heck ya guys what a awesome ride had it’s troubling times but it was a overall great day
he is baaaaaaaaack!!!
When is mower out lab going to bring out the red v twin mud mower?
Ahhhhhhhhh I miss wheeling with the tractor .... mine has been sitting for 4 or 5 years now ..... damnit .... i need another garage .
I have a question and it would be helpful if anyone knows the answer.. My question is why does the pulley shaft on my 5 speed transmission move back and forth if theres anyway to prevent it from doing so I would appreciate you telling me
amazing just amazing! love it!
Awesome!
@Fearlessfront everyone in modern days of mud mowers seem to be swapping in v-twins will you ever consider swapping a v-twin into anything you own
Hey Todd Jorge here from ontario. i just finished my mtd with 14.5hp and a dual pulley (variable speed). i replaced the old original belts for new ones, the blue color (kevlar i think). original size pulleys on it. top speed on 6th is 16 kms/h wich i dont complaint about it. but something weird happened...the new drive belt only lasted 2 weeks of fun. is it normal? i never went to the mud, only drove it on good dirt road or asphalt. i've seen all your videos so far, and i never saw you trying a BX belt type on your murray. im gonna try a BX belt on mine to find out what kind of behaviour i get and also how long will last. if you have any clue of what it caused the belt to start slipping and tear, please let me know.
That Murray is a beast!!
LOL
Turns wheel back and forth but front wheels do not turn. How long you been doing this ? Tighten up that steering. "Ive always got a knife..but its in the truck" lol.
I bet that snow storm we got this spring didn’t help the trail lol, I’ve got small trees fallen over all over the place
What pulleys are u running on the front and back?
For the carb make a box. Open on the top drain hole in the bottom. 2 inch below carb 4 inch above top of od of carb inlet.
Is this by piggery ? Ball fields? Use to ride our 3 wheelers there back in the 90s with the 4 10s
Its good to see the Murray running again. Love the trail ride videos. Question, If I were to make a run to the east coast with Keizer for some trail riding, would you be able to point me to a few peeps that can help set up a few group rides?
How do you keep the drive belt from slipping
Well at least you were able to ride back. It's a start.
It's because of that damn good clutch you built
Been a little while since these 2 have been here. Blown away about the pulley and no belt slippage in the water.
Big question! What kind of rear end does the Murray have? I like the quick shifting ability
He has the clutch cable ran to the gear shifter 4:36
I recon you should put a snorkel on it again but have the air filter just where it is currently. Route it up just in front of the steering wheel through the bonnet. Might give you enough height to dodge water getting into the system
A frenco coupler.2-45° sweepa glued together to form a long sweep 90,a short stack up through hole through hood.and a clamp on air filter...weld small flatbar upright behind assembled snorkel and hose clamp it to flatbar in several places.shove filter down onto pipe once hood is closed..a 90 el cuts the airflow by almost half which would be fine if you were using say 2.5" id abs pipw instead of the 1.5"-2"ish needed to fit carb throat..
You guys ever do any trail rides without mud holes? Like maybe some hills or other obstacles?
I believe they have many times before
You should put 20x18x8ich tires in the front and the back
vids are always fire keep it up man
Why aut you diving the side by side
Do you still have the do something fearless stickers? Cause I'd love to get some
And you straighten up the transmission mounts on there and got the belt Alignment
haha so much recording going on at the end!
Why isn't he locked?
A don’t think it needs bigger tyres keep the size 20s but instead of 20x7x8 you should definitely go for
20x12x8 or 20x10x8 more traction in the hole surface rather the cutting into them
What size motor and what size carb
15OHV Twentyeighth millimeter mkuni style carburetor molkt un governed
For the air filter problem, why don’t you try an ATV air box with a snorkel
My belt is slippin a tiny bit under heavy loads any tips?
Pull back on the clutch
Finally a trail ride !
About time you made a vid
I ride my quad were you guys mud
It could use some better tires
Need to put a 90 on the air filter
nice video
I sure wish I was doing that.
Diesel diesel diesel
I was shaking my phone to help you out of the mud
Lol that's ridiculous 😅
Wut
You are obviously talking over their intelligence level.🤪
She still doing pretty good but I could use some better tires on the back
Отличные у вас лесные дороги нам бы такие.
I’m going to build a mud Murray
My 4 wheeler would eat them up and spit in them after it does that to em why drive them take a 4 wheeler dahhh lol 😂
Well it’s a lawn mower not a four wheeler 🥴
Need 4 wheel drive.
Hi
post more plz
🤔
It's time to put a little bit bigger aggressive tires on that Murray and get rid of them little weak ass tires. My Murray does so much better than that