Being outside of the US, in a country with just 2 official dealerships, having bought my first HD after years of wanting one, running into my first problems with it, being what i have narrowed down to an intake leak - your videos are simply gold! You're a very skilled mechanic and the way you explain things is really great, you're a perfectionist in the best way possible. I'm sure your students are proud of being taught by you. Thank you for this free content. I'm currently waiting for my gaskets for my 1200 EVO. I'll report back after i've done the job.
Love hearing about it! We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/
@@How2Wrench After doing the intake seals change, realigning the manifold using the airfilter backing plate with hollow breather bolts, tightening everything down as much as i could, removed airfilter again, finished tightening - reinstalled, i still have like a 1% leak on the rear cylinder, its nothing compared to what i had before, but its there - the only thing i could think of, would be me cleaning the surface insufficient, the old gaskets were there for maybe 10 years and were hard to remove, there was a bit of residue rubber, i scarped as much as i could with a razor - should i apply grease - or go with oversize gaskets from j.james?
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com
REPOST: Hey folks. Watch the new series for outstanding camera close up and current information Video 22 in the new playlist addresses many of your questions. th-cam.com/play/PLAtBOuPaEyt_7aGpzL9DxDVZy_fofjo1G.html
Thank you for the comment. See the link below for more help. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back. * Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/ * Simple donation to say "KEEP IT UP" May you have a great day and... www.paypal.me/how2wrench Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/ Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join If I can ever be of service to you, here is a video explains how to connect with me. th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Thanks for commenting and adding value to our community! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: th-cam.com/users/conleybuiltplaylists Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks Shane, that was some great info. I've been fighting an intake cough for quite sometime on my 92 FXR-LR and finally figured out it was my intake seals. I replaced the seals, but didn't clean up the intake and it helped, but I was still having problems. I sprayed the seal area with some WD-40 and it cleared up till the WD-40 dried. Now that I watched your video I've bought some more seals and am looking forward to fixing it right the second time. Thanks again for the tip.
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com
I just bought a `90 Springer and will be changing the manifold gaskets just so I know. Once you change them you know you want to start out with new ones.
Just bought a 2001 1200 sportster, I was told it had been dropped but fixed. I'm thinking it was dropped off a building, I just found out that the intake manifold is cracked on the carburetor side at 7 o'clock. I can see shiny metal on both sides of the intake going into the cylinders, I'm thinking the cylinders may have moved when they dropped it. It was fine until I put a chrome carb top on it, now when I decelerate, it Pops and sputters. You described the symptoms perfectly halfway through this video. Thanks, I'm changing it out this weekend.
I'm actually re-videoing this EVO series as we speak. These are pretty old. Checkout my playlists for Twin Cam and Sportster for much newer vids. Also you may want to sign up for notifications to never miss a new vid! Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com
Hope this helped. Want to give us a “high five”? Click here www.paypal.me/how2wrench Need more personalized help? Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: th-cam.com/users/conleybuiltplaylists
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com
Great video , I think it will help me do the compliance fittings. I have an old EVO with a bendix shovel head butterfly carburetor. My fuel inlet is cracked , losing fuel got to fix that too. Fun times .
Find a used Ram Jett solid intake manifold on Ebay. The old Evo intakes with rubber boots are garbage and the later seal ring intakes exist for MoCo assembly line convenience. I threw my new 1988 stock intake in the trash when I bought the bike (I already psychotically hated carb boots from years of wrenching other brands) and that Ram Jett ran for thirty years of use until I replaced the (still good) original engine with an S&S. Ram Jetts don't need a carb brace even with a Super B hanging off them. You'll have to make gaskets (gray auto store gasket paper) and source some Allen bolts to replace the original 12 point fasteners which are always missing. No big deal and you'll likely need to narrow the bolt heads slightly (bench grinder, flap disc on angle grinder, spin bolt with a hand drill) to clear the casting on the narrow side. It's totally worth it and I've lifted my engine using a soft sling around the intake! Try THAT with a stock intake. The "E" stamped intakes are fine for the smaller butterfly carbs be they Bendix or Keihin. (If you ever replace the carb go with a CV and a flanged adapter kit.) If you need more info my nick is farmall on Chop Cult.
Also BTW the stock early Evo carb is a butterfly Keihin but a Bendix will bolt on. Even the first Shovelhead FXRs came with butterfly Keihins (per the factory parts book in my hand, not memory). You can improve those with the Andrews (extinct but repops exist since there are a gazillion Keihins) accelerator pump cover with the internal check ball instead of the stock no check ball emissions version, if your pump cover rattles it has the ball), and a rejet (low speed and main, not just main). A 60 thru 80 drill bit set is perfect (and less than ten bucks) for drilling low speed jets. We checked the lowest number drill bit shank (not the fluted end) that was a slip fit and went up one drill size, test rode and did a plug chop, then let it be (stock engine) or increased if needed due to cam etc. I liked the butterfly on my stock engine, and the rejet runs noticeably cooler (they were lean due to emissions regs) than stock while improving acceleration noticeably. I also removed the choke plate for better airflow since I didn't need it after the rejet and pump mod, but it doesn't get cold in South Carolina.
Glad it was helpful! FYI there is a much newer one in the Twin Cam Playlist thats works exactly the same. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "TH-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thank you for the kind words. Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! how2wrench.com/contact/ If I can ever be of service to you, here is a video explains how to connect with me. th-cam.com/video/vjvmB01ebcs/w-d-xo.html Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Great video man - Great to know, before I finish repairing / re-building my 2011 103 ci FLHTK (Electra Glide Ultra Limited) with 33,000 miles. I have a couple questions if anyone would be so kind to help. I dis-assembled my bike because I was getting a Top End Rattle / Chattering noise / sound especially on cold starts - the bike did sound like it was sucking too much air from the breather area at times. When I took the bike apart, I found major amounts of carbon build up on the top of Piston, Combustion Chamber, Valves, ACR, Gaskets. The rest of the engine looked good. (1) I guess my question is could the intake manifold sucking un filtered air, over long periods cause this mess? I'm finding that the cost of tools for the bike top end rebuild is costing quite a bit of money, are there any tool rental places for a Top end Rebuilds, and Crank ( 2.) My question is to anyone out there that may know, 3. My Crankcase has been exposed to the elements for a couple weeks now, I never covered it up. My 3rd and last question is can the Crankcase be flushed out without removing it from the bike with like WD-40 or new cheaper oil or should I just take that out too and do it that way? I know I have some bugs and shit in there now and possibly will clog my oil pump and stuff. I know, my bad! Thanks in advance!
Thank you for the comment and being part of our community! If ever looking for technical help or a business collaboration call him directly @ (602) 345-0432 Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench Thank you in advance for giving back! He looks forward to working with you directly! Admin-H2W
I think Eric the Car Guy's brother must be a student at your school (yellow shirt), ha ha. Shane, another brilliant discussion. Can you explain how a vacuum leak causes pinging and backfiring?
+Shane Conley thats just how i learned growing up we never had expensive tools in my grandpas building but we had stuff that still had to be fixed haha
Glad you think so! Please hit that subscribe button for us! 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/
I really appreciate that!! I bought a Road King new in 2000 now 26000 miles. I just found out that Harley changed the cam plate and I'm wanting the hydraulic tensioner on my bike. The only problem is (I'm wondering) if I should put the money into it being how Harley built the flywheel? It should have a new cams and bearings while inside the engine and that runs into money for tools so the job could cost 2000 or more. It runs ok now but what about later.
Oh man you want to see this "Twin Cam" playlist! th-cam.com/play/PLAtBOuPaEyt_7aGpzL9DxDVZy_fofjo1G.html I have a new video coming out just on replacing the bearings and tensioners too!
Just and fyi...You're watching the really old video. There's Iink to the new one in the description. Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel: -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
hey great video, very informative. but after you have the intake bolts "snug" an you put the carb on an intake bracket on. how do ya get back to the intake manifold bolts to torque them down?
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com
Shane has a much newer video in the Twin cam playlist that's much better! Glad it helped! You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend... Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "TH-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thank you for the kind words. If I can ever be of service to you, here is a video explains how to connect with me. th-cam.com/video/vjvmB01ebcs/w-d-xo.html Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! how2wrench.com/contact/
Shane, I have a question about the intake cleaning. I used 800 Emery paper to clean the intake manifold to good effect. I've noticed a rough brown ring at the intake port of my 92 EVO engine. Do I need to clean that? If so what should I use, I'm a little concerned about using sand paper in that area. I've tried Xlylene and carb cleaner, but it doesn't seem very effective.
Hi there my bike cuts out sometimes when chopping down to lower gears at intersections it starts straight away.But want to check if it has a manifold leak i have a 07 dyna streetbob.How do i go about it do i remove airflow n throttle body?Will it start after i have taken componants off to check for a leak.
Thanks for you video. I,m new to this but what I,m doing is upgrading my 1988 carb on my 1989 FLHS to a 1999 cv carb. So I bought a intake manifold flanges and seals. The intake manifold do the numbers go up top or bottom 27019-89 facing up or down? thanks
Try this newer video in this playlist. Video number 27. I'm redoing all the EVO series soon too. As far as loctite its best to do just as the service manual suggests unless you're using in another application like racing. I have a good video on threadlockers here: th-cam.com/video/odxDFOGDxuU/w-d-xo.html If it was a quick answer I’d try to respond here but I wouldn’t want to lead you wrong assuming certain factors. Reach out to me on my website contact page. We have been overwhelmed with ungrateful people and scammers so I had to do something for my sanity by screening the over 300 requests a week! Contact Link: how2wrench.com/contact/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Have you subscribed yet to never miss a video? Have you seen the video playlists th-cam.com/users/conleybuiltplaylists? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
So, you only have to torque two bolts? What about the two left in the motor? do they remain where they are? Would have been nice to show the torque process as well
+Shane Conley The bottom manifold bolts.. I guess you just loosen them but leave them in the motor? thanks...about to tear into this on my sportster but want to be confident going in
Hi Charles...that's a really old video on our channel. Here is the mucher newer version: th-cam.com/video/rEVE9n_3BzA/w-d-xo.html 👍 Thank you for taking the time to comment! It helps us! Here is a way to support all the free videos. Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Hi Joel. I'd love to personally help you with your issue of the smoking manifold. If I can ever be of service to you, here is a video explains how to connect with me. th-cam.com/video/vjvmB01ebcs/w-d-xo.html Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
We are just the social media team. Shane has a solution for you. You can use his techline and he will tell you how to do it or ship it to him. He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line. The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Just hi temp grease. Thank you for sharing…Below are some links that help support me and my work along with ways to connect to me for answers! Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com TH-cam: th-cam.com/users/ShaneConleyhow2wrench Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp Most Popular Playlist- Every Mechanic Should Know This: th-cam.com/play/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK.html
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you. Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W: Email Answer Service-Click how2wrench.com/product/email-support/ Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/ DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/ Dealership Training Services-Click how2wrench.com/product-category/dealer-services/ MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/ Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/ On-site Training Services-Click how2wrench.com/product/on-site-training/ Tech Line Services-Click how2wrench.com/product/tech-line-minutes/ Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/ Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist! www.How2Wrench.com
If I can ever be of service to you, here is a video explains how to connect with me. th-cam.com/video/vjvmB01ebcs/w-d-xo.html Keep Wrenching, Shane Conley Instructor/Motivator/Motorcyclist www.how2wrench.com Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench Like freebies? Click here for a free diagnostic checklist! gem.godaddy.com/signups/364621/join Head over to the new website and subscribe to the newsletter to never miss a video or newsletter! how2wrench.com/contact/
I had the same exact thing happen on the same bike. It was all because of an intake leak on that cylinder. Took it all apart and cleaned everything, also had to flatten my flanges they were slightly warped. Runs great now. No more popping on decel either.
Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@@olebilly Shane is in Africa training students this summer. We are just the social team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a channel member please reply back with your TH-cam handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
Thanks Dale! We see you like a few videos. Appreciate the kind note and we will share with share. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "TH-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Two people asked you, how is it possible to tighten the flange bolts with the carb and air cleaner installed, and you ignored them both. Why don't you just admit that it can't be done?
+H Dale Beggs I give people one chance to make negative unhelpful comments. If you think for a second before you type then you would see that there are 8000 subscribers, 2.5 million views and it is hard for me to answer all questions on a FREE channel. This is a gift. Take it or leave it. Also this video is 6 years old and I reference people to watch the updated series th-cam.com/play/PLAtBOuPaEyt_7aGpzL9DxDVZy_fofjo1G.html Think...Look for video 22 in the series.
+Shane Conley I'm sorry if I offended you. However, doing these jobs with the engine removed and on a workbench is quite different from doing it with the engine in the bike and the gas tank in place.I really appreciate all your videos, even though I have a 1989 Low rider, and some of your videos don't apply to a bike that old.Again, I am sorry for being brash.
Reach out to me! Thank you for sharing…When installed correctly as designed you can get years of use with no problems. I find the biggest problem is not looking at the details of the warped flanges and "pulling" out of alignment when installing the air filter. I have a newer video here: th-cam.com/video/rEVE9n_3BzA/w-d-xo.html Let me know if myself or my shop can be of service! Here is a video on how to connect with me: th-cam.com/video/vjvmB01ebcs/w-d-xo.html Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com TH-cam: th-cam.com/users/ShaneConleyhow2wrench Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp Most Popular Playlist- Every Mechanic Should Know This: th-cam.com/play/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK.html
Being outside of the US, in a country with just 2 official dealerships, having bought my first HD after years of wanting one, running into my first problems with it, being what i have narrowed down to an intake leak - your videos are simply gold!
You're a very skilled mechanic and the way you explain things is really great, you're a perfectionist in the best way possible.
I'm sure your students are proud of being taught by you.
Thank you for this free content.
I'm currently waiting for my gaskets for my 1200 EVO.
I'll report back after i've done the job.
Love hearing about it!
We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
@@How2Wrench After doing the intake seals change, realigning the manifold using the airfilter backing plate with hollow breather bolts, tightening everything down as much as i could, removed airfilter again, finished tightening - reinstalled, i still have like a 1% leak on the rear cylinder, its nothing compared to what i had before, but its there - the only thing i could think of, would be me cleaning the surface insufficient, the old gaskets were there for maybe 10 years and were hard to remove, there was a bit of residue rubber, i scarped as much as i could with a razor - should i apply grease - or go with oversize gaskets from j.james?
I really love your detailed and thorough explanations of EVERYTHING in your videos. Thanks for being a perfectionist.
I bet all your students become excellent Harley tech's when they finish with your coarses..great job.
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you.
Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W:
Email Answer Service-Click how2wrench.com/product/email-support/
Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/
DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/
Dealership Training Services-Click how2wrench.com/product-category/dealer-services/
MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/
Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/
On-site Training Services-Click how2wrench.com/product/on-site-training/
Tech Line Services-Click how2wrench.com/product/tech-line-minutes/
Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
Great instructor everybody's favorite teacher...thankyou
REPOST:
Hey folks. Watch the new series for outstanding camera close up and current information Video 22 in the new playlist addresses many of your questions. th-cam.com/play/PLAtBOuPaEyt_7aGpzL9DxDVZy_fofjo1G.html
Getting everything "settled" is definitely the key. Well said.
Thank you for the comment. See the link below for more help. I have been banging my head against the wall thinking of ways for people to say thank you in an impactful way to help keep these videos coming. Here are few ways that many have found as a way to give back.
* Membership to H2W (includes t-shirt or tech help) how2wrench.com/product/membershipmembers-onlymembers/
* Simple donation to say "KEEP IT UP"
May you have a great day and... www.paypal.me/how2wrench
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Missed a past issue? No Worries. Newsletter Archives: how2wrench.com/blog/newsletter-archives/
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
If I can ever be of service to you, here is a video explains how to connect with me.
th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Great stuff it nice to see someone show how to take your time and do it right the first time! True pro!
Thanks for commenting and adding value to our community!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: th-cam.com/users/conleybuiltplaylists
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks Shane, that was some great info. I've been fighting an intake cough for quite sometime on my 92 FXR-LR and finally figured out it was my intake seals. I replaced the seals, but didn't clean up the intake and it helped, but I was still having problems. I sprayed the seal area with some WD-40 and it cleared up till the WD-40 dried. Now that I watched your video I've bought some more seals and am looking forward to fixing it right the second time. Thanks again for the tip.
My sporty runs between 1500 and 2000 rpm on idle position - will check this out tomorrow, thank you for explaining!
Check out the new series...
th-cam.com/play/PLAtBOuPaEyt_7aGpzL9DxDVZy_fofjo1G.html
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you.
Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W:
Email Answer Service-Click how2wrench.com/product/email-support/
Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/
DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/
Dealership Training Services-Click how2wrench.com/product-category/dealer-services/
MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/
Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/
On-site Training Services-Click how2wrench.com/product/on-site-training/
Tech Line Services-Click how2wrench.com/product/tech-line-minutes/
Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
I just bought a `90 Springer and will be changing the manifold gaskets just so I know. Once you change them you know you want to start out with new ones.
Thanks Shane! About to do the seals on my evo and this helped so much! :) Greets from Australia.
Just bought a 2001 1200 sportster, I was told it had been dropped but fixed. I'm thinking it was dropped off a building, I just found out that the intake manifold is cracked on the carburetor side at 7 o'clock. I can see shiny metal on both sides of the intake going into the cylinders, I'm thinking the cylinders may have moved when they dropped it. It was fine until I put a chrome carb top on it, now when I decelerate, it Pops and sputters. You described the symptoms perfectly halfway through this video. Thanks, I'm changing it out this weekend.
I'm actually re-videoing this EVO series as we speak. These are pretty old. Checkout my playlists for Twin Cam and Sportster for much newer vids. Also you may want to sign up for notifications to never miss a new vid! Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you.
Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W:
Email Answer Service-Click how2wrench.com/product/email-support/
Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/
DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/
Dealership Training Services-Click how2wrench.com/product-category/dealer-services/
MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/
Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/
On-site Training Services-Click how2wrench.com/product/on-site-training/
Tech Line Services-Click how2wrench.com/product/tech-line-minutes/
Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
Doing this job tomorrow on my bike, wish me luck, lol. Thanks for the vid👍
Hope this helped. Want to give us a “high five”? Click here www.paypal.me/how2wrench
Need more personalized help? Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: th-cam.com/users/conleybuiltplaylists
Awesome. Doing that Saturday. Thanks again.
The last part, question how can you bolt things down slowly when you have the carb and the air cleaner bracket in the way?
You would have to remove the fuel tank(s)
Thanks, I used a small brass bristled brush and smoothed it out, seems to have worked great. I'll remember the scotchbrite pad for next time.
Many thanks for your great video!
quality lesson, thank you for the info. I think I'll pass on the used flanges I was looking at on ebay because of your clear explanation.
Thank you!
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you.
Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W:
Email Answer Service-Click how2wrench.com/product/email-support/
Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/
DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/
Dealership Training Services-Click how2wrench.com/product-category/dealer-services/
MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/
Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/
On-site Training Services-Click how2wrench.com/product/on-site-training/
Tech Line Services-Click how2wrench.com/product/tech-line-minutes/
Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
Shane Conley
Great video , I think it will help me do the compliance fittings. I have an old EVO with a bendix shovel head butterfly carburetor. My fuel inlet is cracked , losing fuel got to fix that too. Fun times
.
Find a used Ram Jett solid intake manifold on Ebay. The old Evo intakes with rubber boots are garbage and the later seal ring intakes exist for MoCo assembly line convenience. I threw my new 1988 stock intake in the trash when I bought the bike (I already psychotically hated carb boots from years of wrenching other brands) and that Ram Jett ran for thirty years of use until I replaced the (still good) original engine with an S&S.
Ram Jetts don't need a carb brace even with a Super B hanging off them. You'll have to make gaskets (gray auto store gasket paper) and source some Allen bolts to replace the original 12 point fasteners which are always missing. No big deal and you'll likely need to narrow the bolt heads slightly (bench grinder, flap disc on angle grinder, spin bolt with a hand drill) to clear the casting on the narrow side. It's totally worth it and I've lifted my engine using a soft sling around the intake! Try THAT with a stock intake.
The "E" stamped intakes are fine for the smaller butterfly carbs be they Bendix or Keihin. (If you ever replace the carb go with a CV and a flanged adapter kit.) If you need more info my nick is farmall on Chop Cult.
Also BTW the stock early Evo carb is a butterfly Keihin but a Bendix will bolt on. Even the first Shovelhead FXRs came with butterfly Keihins (per the factory parts book in my hand, not memory). You can improve those with the Andrews (extinct but repops exist since there are a gazillion Keihins) accelerator pump cover with the internal check ball instead of the stock no check ball emissions version, if your pump cover rattles it has the ball), and a rejet (low speed and main, not just main). A 60 thru 80 drill bit set is perfect (and less than ten bucks) for drilling low speed jets. We checked the lowest number drill bit shank (not the fluted end) that was a slip fit and went up one drill size, test rode and did a plug chop, then let it be (stock engine) or increased if needed due to cam etc. I liked the butterfly on my stock engine, and the rejet runs noticeably cooler (they were lean due to emissions regs) than stock while improving acceleration noticeably. I also removed the choke plate for better airflow since I didn't need it after the rejet and pump mod, but it doesn't get cold in South Carolina.
Sometimes backfiring is unburnt fuel mixing with the hot air in the muffler n pinging is the wrong fuel just from what ive learnt.
Great information. Thank you!
Glad it was helpful! FYI there is a much newer one in the Twin Cam Playlist thats works exactly the same.
We love sharing comments like this with Shane.
Thanks for sharing and the added value to our wrenching community. Keep them coming.
You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "TH-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Thank You, Excellent Video
Thank you for the kind words. Head over to the new website and subscribe to the newsletter to never miss a video or newsletter!
how2wrench.com/contact/
If I can ever be of service to you, here is a video explains how to connect with me.
th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Thanks for the tips! ....Very appreciated.
good one
once again you covered all the bases again
cheers mate
Great video man - Great to know, before I finish repairing / re-building my 2011 103 ci FLHTK (Electra Glide Ultra Limited) with 33,000 miles.
I have a couple questions if anyone would be so kind to help. I dis-assembled my bike because I was getting a Top End Rattle / Chattering noise / sound especially on cold starts - the bike did sound like it was sucking too much air from the breather area at times. When I took the bike apart, I found major amounts of carbon build up on the top of Piston, Combustion Chamber, Valves, ACR, Gaskets. The rest of the engine looked good. (1) I guess my question is could the intake manifold sucking un filtered air, over long periods cause this mess?
I'm finding that the cost of tools for the bike top end rebuild is costing quite a bit of money, are there any tool rental places for a Top end Rebuilds, and Crank ( 2.)
My question is to anyone out there that may know, 3. My Crankcase has been exposed to the elements for a couple weeks now, I never covered it up. My 3rd and last question is can the Crankcase be flushed out without removing it from the bike with like WD-40 or new cheaper oil or should I just take that out too and do it that way? I know I have some bugs and shit in there now and possibly will clog my oil pump and stuff. I know, my bad!
Thanks in advance!
Excellent job!
Thank you for the comment and being part of our community! If ever looking for technical help or a business collaboration call him directly @ (602) 345-0432
Are you just wanting to say thanks? Consider a donation here: www.paypal.me/how2wrench
Thank you in advance for giving back! He looks forward to working with you directly!
Admin-H2W
I think Eric the Car Guy's brother must be a student at your school (yellow shirt), ha ha.
Shane, another brilliant discussion. Can you explain how a vacuum leak causes pinging and backfiring?
Haha! I see that!
i done this a hundred times never had a leak and never used a torque wrench on the manifold
Nice. Good elbow clicker you have. Not all do. Keep that in mind when giving advice to newer techs that don't have the feel yet. Thanks for watching.
+Shane Conley thats just how i learned growing up we never had expensive tools in my grandpas building but we had stuff that still had to be fixed haha
+Ric Wheeler this whole world was built on commonsense and some skill both of which are missing greatly. 😊
Valuable knowledge free on TY, awesome.👍
Glad you think so! Please hit that subscribe button for us! 👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
Thanks for the video,I wish I could come to your school!
I really appreciate that!!
I bought a Road King new in 2000 now 26000 miles.
I just found out that Harley changed the cam plate and I'm wanting the hydraulic tensioner on my bike.
The only problem is (I'm wondering) if I should put the money into it being how Harley built the flywheel?
It should have a new cams and bearings while inside the engine and that runs into money for tools so the job could cost 2000 or more.
It runs ok now but what about later.
Oh man you want to see this "Twin Cam" playlist! th-cam.com/play/PLAtBOuPaEyt_7aGpzL9DxDVZy_fofjo1G.html
I have a new video coming out just on replacing the bearings and tensioners too!
Snap on makes torque bars for torque wrenches and most times you leave the jugs only parially tight so the can be adjusted to the intake.
Just and fyi...You're watching the really old video. There's Iink to the new one in the description. Thank you for commenting. Want more benefits? Smash the subscribe button and bell! Want even more??? Join the channel:
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Maybe Harley will go back to cast iron jugs so they'll be consistent...maybe even water cooled.
@@johnnysechrist6313 Water-cooled for sure...have you seen the baggers have water-cooled heads now?
So any chance you could do a video on compliance fittings For the intake ?
hey great video, very informative. but after you have the intake bolts "snug" an you put the carb on an intake bracket on. how do ya get back to the intake manifold bolts to torque them down?
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you.
Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W:
Email Answer Service-Click how2wrench.com/product/email-support/
Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/
DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/
Dealership Training Services-Click how2wrench.com/product-category/dealer-services/
MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/
Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/
On-site Training Services-Click how2wrench.com/product/on-site-training/
Tech Line Services-Click how2wrench.com/product/tech-line-minutes/
Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
good job i'm going now thanks
Shane has a much newer video in the Twin cam playlist that's much better!
Glad it helped! You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "TH-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
What's a good start for jets with an intake and drag pipes setup on a stock 1200?
Very informative- thanks for sharing 👍
Thank you for the kind words. If I can ever be of service to you, here is a video explains how to connect with me.
th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Head over to the new website and subscribe to the newsletter to never miss a video or newsletter!
how2wrench.com/contact/
Shane, I have a question about the intake cleaning.
I used 800 Emery paper to clean the intake manifold to good effect.
I've noticed a rough brown ring at the intake port of my 92 EVO engine.
Do I need to clean that? If so what should I use, I'm a little concerned about using sand paper in that area. I've tried Xlylene and carb cleaner, but it doesn't seem very effective.
If the ring is just discolored and not gouged you should be OK. I use a scotch brite pad to clean mine.
Hi there my bike cuts out sometimes when chopping down to lower gears at intersections it starts straight away.But want to check if it has a manifold leak i have a 07 dyna streetbob.How do i go about it do i remove airflow n throttle body?Will it start after i have taken componants off to check for a leak.
Thanks for you video. I,m new to this but what I,m doing is upgrading my 1988 carb on my 1989 FLHS to a 1999 cv carb. So I bought a intake manifold flanges and seals. The intake manifold do the numbers go up top or bottom 27019-89 facing up or down? thanks
i did not see you use lock tite or say its recommended is it needed?
Try this newer video in this playlist. Video number 27. I'm redoing all the EVO series soon too. As far as loctite its best to do just as the service manual suggests unless you're using in another application like racing.
I have a good video on threadlockers here: th-cam.com/video/odxDFOGDxuU/w-d-xo.html
If it was a quick answer I’d try to respond here but I wouldn’t want to lead you wrong assuming certain factors. Reach out to me on my website contact page. We have been overwhelmed with ungrateful people and
scammers so I had to do something for my sanity by screening the over 300
requests a week! Contact Link: how2wrench.com/contact/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Have you subscribed yet to never miss a video? Have you seen the video playlists th-cam.com/users/conleybuiltplaylists?
Want to say “thanks” or “keep it up”?
Click here www.paypal.me/how2wrench
So, you only have to torque two bolts? What about the two left in the motor? do they remain where they are? Would have been nice to show the torque process as well
Which two bolts are you referencing bud? I am starting a new Harley Twin Cam series and could address it in the upcoming videos.
+Shane Conley The bottom manifold bolts.. I guess you just loosen them but leave them in the motor? thanks...about to tear into this on my sportster but want to be confident going in
I found I could not torque the bolts after installing everything. Had to back up and finish torquing them.
Hi Charles...that's a really old video on our channel. Here is the mucher newer version: th-cam.com/video/rEVE9n_3BzA/w-d-xo.html
👍 Thank you for taking the time to comment! It helps us!
Here is a way to support all the free videos.
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Just changed mine on my 02 883r. It started smoking white when I cranked it back up. Have any idea why it would do that? Thanks for the video!
Looks like it's coming from the intake manifold
Hi Joel. I'd love to personally help you with your issue of the smoking manifold. If I can ever be of service to you, here is a video explains how to connect with me.
th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Do you guys recommend using anti seize, locktight or installing dry for the flange bolts?
We are just the social media team. Shane has a solution for you. You can use his techline and he will tell you how to do it or ship it to him.
He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line.
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "TH-cam Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
What are you using to lube the seals?
Just hi temp grease. Thank you for sharing…Below are some links that help support me and my work along with ways to connect to me for answers! Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
TH-cam:
th-cam.com/users/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
Most Popular Playlist- Every Mechanic Should Know This:
th-cam.com/play/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK.html
Plz dont use just grease .. plz use brake grease . wont damage rubber over time . BUT verry good info
Head over to my website become a member now and to receive 20 minutes of personal mentorship with me. You can even use FaceTime if you have it or find a friends iPhone and we can walk through the actual carburetor process together. I look forward to mentoring you.
Note: Membership is not required to receive coaching or email help. Here are the direct links to individual services offered at H2W:
Email Answer Service-Click how2wrench.com/product/email-support/
Phone/FaceTime Coaching-Click how2wrench.com/product/personal-tech-training-phone-facetime/
DIY Mentorship-Click how2wrench.com/product/diy-coaching-hire-teach/
Dealership Training Services-Click how2wrench.com/product-category/dealer-services/
MMI/Tech School Student Tutoring-Click how2wrench.com/product/mmi-tech-school-student-tutoring-services/
Motivational/Guest Speaker-Click how2wrench.com/product/motivational-speaker/
On-site Training Services-Click how2wrench.com/product/on-site-training/
Tech Line Services-Click how2wrench.com/product/tech-line-minutes/
Mechanic on Duty-Click how2wrench.com/product-category/mechanic-on-duty/
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.com/donate/?token=TvKoeRazPL-KysbM-e0ttz-C_gPq2IrqxDmM3ORCu4nxJzQWxYbmo-6m3YuNu64XHLngGW
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist!
www.How2Wrench.com
I would use silicone grease, like you would use on O rings to preserve the rubber.
i have a 2009 nightster and I noticed that my front exhaust header glowing orange after about a minute after start up
If I can ever be of service to you, here is a video explains how to connect with me.
th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Keep Wrenching,
Shane Conley
Instructor/Motivator/Motorcyclist
www.how2wrench.com
Did you like this free video and hope to see more? Would you just like to say thank you with a donation? Click www.paypal.me/how2wrench
Like freebies? Click here for a free diagnostic checklist!
gem.godaddy.com/signups/364621/join
Head over to the new website and subscribe to the newsletter to never miss a video or newsletter!
how2wrench.com/contact/
I had the same exact thing happen on the same bike. It was all because of an intake leak on that cylinder. Took it all apart and cleaned everything, also had to flatten my flanges they were slightly warped. Runs great now. No more popping on decel either.
Maybe hd should not be making problems from the factory.
God i want to learn all if this
Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists!
Even more training and deep dives if ever needed…
Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
@@How2Wrench I subscribed! Thanks
@@olebilly many newer videos too. I re shot the Evo to be released this fall as a deep dive member video
@@How2Wrench What is a good carb to use for the evo motor? S&S is illegal in CA :( my carb is bad
@@olebilly Shane is in Africa training students this summer. We are just the social team. He plans on answering channel MEMBER questions each Sunday!
Not a member yet? Here are the details!
Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
Note: If you are a channel member please reply back with your TH-cam handle. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
Get a Dremel tool with a set of sandpaper wheels. It will make life much better. ;)
He's talking only truth.
Thanks Dale! We see you like a few videos. Appreciate the kind note and we will share with share.
Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped!
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
th-cam.com/channels/BhM8DCKnT3qXwTW0eToyCg.htmljoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "TH-cam Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Two people asked you, how is it possible to tighten the flange bolts with the carb and air cleaner installed, and you ignored them both. Why don't you just admit that it can't be done?
+H Dale Beggs
I give people one chance to make negative unhelpful comments. If you think for a second before you type then you would see that there are 8000 subscribers, 2.5 million views and it is hard for me to answer all questions on a FREE channel. This is a gift. Take it or leave it. Also this video is 6 years old and I reference people to watch the updated series th-cam.com/play/PLAtBOuPaEyt_7aGpzL9DxDVZy_fofjo1G.html
Think...Look for video 22 in the series.
+Shane Conley I'm sorry if I offended you. However, doing these jobs with the engine removed and on a workbench is quite different from doing it with the engine in the bike and the gas tank in place.I really appreciate all your videos, even though I have a 1989 Low rider, and some of your videos don't apply to a bike that old.Again, I am sorry for being brash.
3 different guys worked on mine and it always leaked. shitty design period.
Reach out to me! Thank you for sharing…When installed correctly as designed you can get years of use with no problems. I find the biggest problem is not looking at the details of the warped flanges and "pulling" out of alignment when installing the air filter. I have a newer video here: th-cam.com/video/rEVE9n_3BzA/w-d-xo.html
Let me know if myself or my shop can be of service! Here is a video on how to connect with me: th-cam.com/video/vjvmB01ebcs/w-d-xo.html
Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
TH-cam:
th-cam.com/users/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
Most Popular Playlist- Every Mechanic Should Know This:
th-cam.com/play/PLAtBOuPaEyt_uMyVlK1tsBVnSYW1Q0vCK.html