Great video mate 👍 could you explain how to accurately check for the liquid level reading calibration, meaning how do you know if the machine reads the level properly or if it's out of bounds . Cheers Holden 👍
Great video l have a problem. We have two 700 ton chillers YK variable primary configuration the plant . When chiller 2 is on without chiller 1 on .When OT above 80 WTH 58 RH we have a over 90 degree going out to cooling tower & 75 degrees coming back chiller .When both chillers run it drops down to 85 degrees with a 75 degree.We check split across the condenser and it’s not plugged . The flow is good it over 1200 GPM bypass at 0 on the BMS which mean it going out to building. We did have York check out they can determine what caused this it never ran above 85 degrees in last 10 years all the log on got on this machine.
At first Thank you.That’s what I really saw about lowering the level sensor to come over the head pressure which causes turbulence obviously . Good luck
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
I have produced a 6 page Technical Reference Guide. hvactime.shop/products/yk-tech-sheet
Saddle wear on the support sheet in the subcooler bundle. Yep make sense.👍 well said.
Always great content! Thanks, Holden.
You too boss
Lot of good information there. Thanks for sharing.
Great video mate 👍 could you explain how to accurately check for the liquid level reading calibration, meaning how do you know if the machine reads the level properly or if it's out of bounds .
Cheers Holden 👍
Great video l have a problem. We have two 700 ton chillers YK variable primary configuration the plant . When chiller 2 is on without chiller 1 on .When OT above 80 WTH 58 RH we have a over 90 degree going out to cooling tower & 75 degrees coming back chiller .When both chillers run it drops down to 85 degrees with a 75 degree.We check split across the condenser and it’s not plugged . The flow is good it over 1200 GPM bypass at 0 on the BMS which mean it going out to building. We did have York check out they can determine what caused this it never ran above 85 degrees in last 10 years all the log on got on this machine.
Just filed it away in the ole memory bank. Thank you good sir
At first Thank you.That’s what I really saw about lowering the level sensor to come over the head pressure which causes turbulence obviously . Good luck
Thank you.!
Great video!
Do the have training videos .
FieldPulse is great. Can’t say the same about the P software.
There are various lengths to the LLS for these chillers
Those level sensors will get out of calibration quite often. Could have changed even from when it was started up
Cool, man
What's HVAC Meaning ?
Heating ventilation and cooling
@@madeofscars9355 Thanks Bro 🌟❤️
😮👍