How To Install Commercial Door Hardware

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ม.ค. 2025

ความคิดเห็น •

  • @drewinstallshardware
    @drewinstallshardware 10 หลายเดือนก่อน +2

    2:54 great view

  • @CaliJirka
    @CaliJirka ปีที่แล้ว +4

    Arent you supposed to screw the holding guide separately from the mounting plate?

    • @pouncerminned863
      @pouncerminned863 วันที่ผ่านมา

      yes, but this dude didn't..handyman special

  • @johnsmithson4479
    @johnsmithson4479 2 ปีที่แล้ว +6

    Very helpful, been putting off a project because the instructions that came with the lock were about as easy to understand as gibberish to me. Never thought it was so simple!

  • @skibidiiuh
    @skibidiiuh 2 ปีที่แล้ว +6

    I got to install this shit tomorrow At work I didn’t know how thanks for the video!!!

  • @kktrader5215
    @kktrader5215 3 ปีที่แล้ว +3

    why can't i push the handle in, is loose can not stay tight in the chamber? one side is in but the button to lock it inside could not be push in tight in the handle, please i need to have the answer. thanks

  • @khaskin18
    @khaskin18 5 ปีที่แล้ว +18

    How do you take it back apart? We didn't install it so no directions or included tools were left.

  • @functionaltherapeuticsjana9710
    @functionaltherapeuticsjana9710 ปีที่แล้ว +1

    I cannot get my rossette to twist on a door handle that is supposed to be R/L universal. The outside is for vacant/occupied and needs to be turned 180 degrees. Cant find a video on it either...help!!

    • @mitchellacoustical3119
      @mitchellacoustical3119  ปีที่แล้ว

      Have you used the pin to get the lever off and then turned the rossette? One side will be the side the two bolts go thru to connect the back plate

  • @mountains1233
    @mountains1233 ปีที่แล้ว +1

    is door handle better for soundproofing?

  • @jaredp2533
    @jaredp2533 ปีที่แล้ว +4

    If only the one I had to install today was this simple 😭😭😭

  • @franciscosunworld
    @franciscosunworld 10 หลายเดือนก่อน +1

    Thanks for the video, but you need close up of some parts of the video to be rally usefull.

  • @kolawolefagbamiye3882
    @kolawolefagbamiye3882 2 ปีที่แล้ว +3

    Gr8 video. Gr8 information. Thanks.

  • @jesseobrien5864
    @jesseobrien5864 5 ปีที่แล้ว +2

    Black Belt Door Knob Sensei. You sir are a genius. I mean this in the highest respect. I've watched countless videos just to be left confused and full of anxiety. You explained this in your video in 5 minutes to where I could understand it and memorize it. I have PTSD. Still could understand it. Love & Respect from me and Lily 🐕 in Portland Oregon 💯

  • @BuildYohome
    @BuildYohome ปีที่แล้ว +1

    What is the difference between passage lock and dummy lock?

  • @khionesnowflower8721
    @khionesnowflower8721 ปีที่แล้ว +1

    How much is that doorknob?

  • @artdunn9474
    @artdunn9474 ปีที่แล้ว +1

    How do you get a new one to match old key?

  • @turbojoe9554
    @turbojoe9554 6 หลายเดือนก่อน

    now how does the handle come off if/when we have to replace the assembly??

  • @ratataran
    @ratataran 3 หลายเดือนก่อน

    What if the actual latch is too long for the stock door? It sticks out far too much

  • @SeniorTurner
    @SeniorTurner 6 หลายเดือนก่อน

    Mine has a key hole lock, I get to the end where I attach the last latch and the other side stays locked even when you turn the key. Any suggestions

  • @GSDLLCTupelo
    @GSDLLCTupelo 2 หลายเดือนก่อน

    what tool do you use to make the 2 holes above and below the main hole?

    • @mitchellacoustical3119
      @mitchellacoustical3119  2 หลายเดือนก่อน

      There is a jig that makes them, but most times our door mfg does that for us before the slab is shipped to the jobsite.

  • @trinergy4182
    @trinergy4182 2 ปีที่แล้ว +1

    Will a paper clip work to get the lever off?

    • @mitchellacoustical3119
      @mitchellacoustical3119  2 ปีที่แล้ว

      You can try, sometimes they can be brutal on the finger to push in the hole

    • @dougd878
      @dougd878 2 ปีที่แล้ว

      @@mitchellacoustical3119 yeah dude, show that brutal part and give some tips, you literally cut that part of the video out

  • @AliHassan-lk4sh
    @AliHassan-lk4sh 2 ปีที่แล้ว +1

    What means of commercial Here.?

  • @randytravis5893
    @randytravis5893 5 ปีที่แล้ว +7

    Thank you sir! You took a huge pain in the ass job and argument and turned it into a simple 5 minute project! My wife thinks im smart now! " Priceless!"

    • @mitchellacoustical3119
      @mitchellacoustical3119  5 ปีที่แล้ว +1

      Absolutely! Yea I needed help when I was 1st installing these at an H&M and my foreman looked at me crazy when I said I didn’t know how, so he took the time to help me. Glad I could pass that along!

    • @randytravis5893
      @randytravis5893 5 ปีที่แล้ว +1

      You really saved me a load of time. Keep making videos like these, there great!@@mitchellacoustical3119

    • @mitchellacoustical3119
      @mitchellacoustical3119  5 ปีที่แล้ว

      Randy Travis we’ve got some more door videos in the pipeline, so stay tuned👍

  • @OGSHAKER2020
    @OGSHAKER2020 2 ปีที่แล้ว +1

    Hey bud new sub .. on these types of handles first what are they called 🤔 lol & can fix them when they are saggy from both sides? Thx u much fir sharing your knowledge 👍

    • @mitchellacoustical3119
      @mitchellacoustical3119  2 ปีที่แล้ว

      My guess is that the handle is just worn out. Or you can take off the lever and try and tighten the screws and see if that works.

  • @danishpatel001
    @danishpatel001 4 ปีที่แล้ว +1

    my door getting auto look from outside.. from inside it is working fine., can i able to repair it

  • @hardboiled7774
    @hardboiled7774 6 ปีที่แล้ว +4

    Great videos, I wish I had access to this material years ago. Keep up the great work!

  • @McCoysActionKarateAuburn
    @McCoysActionKarateAuburn 2 ปีที่แล้ว +2

    how do you take the level off?

    • @dougd878
      @dougd878 2 ปีที่แล้ว

      precisely! they cut that part out because he had trouble and then didn't show how to overcome that hurdle

    • @liopleurodon1176
      @liopleurodon1176 ปีที่แล้ว

      Lever?, its pretty much the first thing he does

    • @liopleurodon1176
      @liopleurodon1176 ปีที่แล้ว

      0:45

  • @patwalker6898
    @patwalker6898 5 ปีที่แล้ว +2

    @Mitchell Acoustical was attempting to put on of these in today. It was a locking one but the same mechanism. However, when I put the bolt in and got everything attached the bolt would not come all the way out. Any ideas.

    • @mitchellacoustical3119
      @mitchellacoustical3119  5 ปีที่แล้ว

      Pat Walker do you mean the throat of the latch? My initial thought would be that it’s not set properly or there is a set back for the depth of the latch. It’s hard to explain, but may be an idea for a video.

  • @Shanedog76
    @Shanedog76 3 ปีที่แล้ว +1

    what if you lost the pin that releases the handle?

    • @mitchellacoustical3119
      @mitchellacoustical3119  3 ปีที่แล้ว

      Maybe a thumbtack?

    • @jimdenio669
      @jimdenio669 3 ปีที่แล้ว +1

      Large paperclip or small screwdriver pushed into hole works just fine. No special tool required.

  • @OGSHAKER2020
    @OGSHAKER2020 2 ปีที่แล้ว +1

    Also do you have a vid 👀 on how to adjust a saggy top corner door ? These exact commercial commercial grade ones? Appreciate 🙏 cha

    • @mitchellacoustical3119
      @mitchellacoustical3119  2 ปีที่แล้ว +1

      I’m wondering with this, and your other comment, is the door you’re asking about an aluminum/glazing door rather than a hollow metal?

    • @OGSHAKER2020
      @OGSHAKER2020 2 ปีที่แล้ว

      @@mitchellacoustical3119 it is a solid wood door its at a school .. think the hinge is a spring hinge... 2 bosses or loops off the door & on long boss or loop. Of the frame side .. like 2 .5 inches long ...looks just like the one your hanging but different hingeid all

  • @titanpro1
    @titanpro1 2 ปีที่แล้ว +1

    nice video .specialized door cart

  • @matthewhoffman9896
    @matthewhoffman9896 3 ปีที่แล้ว +2

    Thanks for the vid, we have a loose knob at the office and I wasn’t sure how to get to the screws to tighten it. What did you say the tool was to remove the handle?

  • @davidclark6163
    @davidclark6163 5 ปีที่แล้ว +5

    The use of a 5/64ths centering hinge bit is recommended for those small screws holding in the latch. Also you should always be making good use of your drills clutch.

  • @coocookiersten
    @coocookiersten 4 ปีที่แล้ว +1

    What size is this? I got one but it too small how do I know the correct size?

    • @mitchellacoustical3119
      @mitchellacoustical3119  4 ปีที่แล้ว

      This is a typical level set. They should all be the same size. Unless you have security hardware on it.

  • @luisperez-wu5vo
    @luisperez-wu5vo 5 ปีที่แล้ว +2

    Hey do closers and panic bars installation

    • @mitchellacoustical3119
      @mitchellacoustical3119  5 ปีที่แล้ว +1

      Those are on the list of videos to do, we just have to have doors to put them on. A panic set hasn't came out in a while, but we'll get around to one shortly with a dealership were working on

  • @jefferykirby934
    @jefferykirby934 4 ปีที่แล้ว +1

    THE VIDEO WAS VERY HELPFUL THANKS

  • @believeme5903
    @believeme5903 4 ปีที่แล้ว +1

    How do you get it OFF??? YOU TALK ABOUT A PIN KEY, WHAT IS THAT CAN'T SEE IT IN THE VIDEO. MINE IS ALREADY MOUNTED ON THE DOOR AND UNABLE TO GET IT OFF!

    • @mitchellacoustical3119
      @mitchellacoustical3119  4 ปีที่แล้ว

      The pin hole is opposite of the lever. You turn the key 45 push in the pin and pull off.

  • @holy_Henchman28
    @holy_Henchman28 9 หลายเดือนก่อน

    Your awesome man great way to explain it simple and easy appreciate it big dawg they setup these doors like booby traps lol thanks man

  • @alexboyd554
    @alexboyd554 3 ปีที่แล้ว +1

    You save me. Thanks so much.

  • @LuficariusRatspeed
    @LuficariusRatspeed 5 หลายเดือนก่อน

    You have your torque level set all the way up to 15...

  • @johnnyred909
    @johnnyred909 3 ปีที่แล้ว +2

    You skip a step, two screws go into the housing before putting on the trim

  • @kingjeremysircornwell7847
    @kingjeremysircornwell7847 5 ปีที่แล้ว +1

    The door hardware can be used for a gun/trigger mechanism.

  • @Ray00069
    @Ray00069 3 ปีที่แล้ว +1

    I had issues putting the strike plate on. LOL 🤣🤣

  • @jaybig360
    @jaybig360 9 หลายเดือนก่อน

    Dude show the drilling of the two holes 🕳️ for the lever

  • @2030michael2030
    @2030michael2030 5 ปีที่แล้ว +2

    good job

  • @soundsr7446
    @soundsr7446 2 ปีที่แล้ว +1

    Nice

  • @carlosr617
    @carlosr617 4 ปีที่แล้ว +1

    Thank you!

  • @andrewkaufmann2451
    @andrewkaufmann2451 4 ปีที่แล้ว +1

    This was great! Thanks.

  • @toothpastehombre
    @toothpastehombre 4 ปีที่แล้ว +2

    Just saved my ass! Thank you

  • @DD-su5so
    @DD-su5so 5 ปีที่แล้ว +1

    Ok video...... but you should take a locksmith course.

    • @mitchellacoustical3119
      @mitchellacoustical3119  5 ปีที่แล้ว +2

      Carpenter by trade. No need to be a locksmith to install a lockset.

    • @pouncerminned863
      @pouncerminned863 วันที่ผ่านมา

      @@mitchellacoustical3119 thats not the wisest thing i have heard anyone say..if you install alockset wrong, you can have some serious issues or weaken the security the lock was meant to provide..like saying you don't need to understand any electrician stuff if your working with electricity

  • @210867able
    @210867able 4 ปีที่แล้ว +1

    You vid is good wish was a little closer

  • @kimmendoza5344
    @kimmendoza5344 4 ปีที่แล้ว +1

    I could installed 50 to 60 a day

  • @labradfordsmith5005
    @labradfordsmith5005 ปีที่แล้ว +1

    Good video but we can’t see shit

  • @luisperez-wu5vo
    @luisperez-wu5vo 5 ปีที่แล้ว +2

    Give be 35 an hour I work for you

    • @mitchellacoustical3119
      @mitchellacoustical3119  5 ปีที่แล้ว +1

      We start everyone out at $25 for a probation period to show thier skills then after a month or so we can evaluate the value. We have guys in the upper $40s, so we do pay decent wages.

    • @panchovilla080
      @panchovilla080 5 ปีที่แล้ว

      @@mitchellacoustical3119 where are you guys located? I'm looking for a new job and I'd consider myself handy with tools

    • @mitchellacoustical3119
      @mitchellacoustical3119  5 ปีที่แล้ว

      xavier miranda We’re located in Elgin, IL.

    • @aliramirez6064
      @aliramirez6064 3 ปีที่แล้ว

      25$ starting and up to 40$!! Wow!! Took me 5 years to get to 21$ and they top us out at 25$. Looks like I need to start looking for a new commercial door job. Lol

  • @labradfordsmith5005
    @labradfordsmith5005 ปีที่แล้ว +1

    Good video but we can’t see shit