@@AVGSolutions yung 1watt po ang bawat isa may kanya-kanyang heatsink, pag direct po kasi ang kabit ko sa 18650 sobra po ang init po nung heatsink talagang hindi po mahawakan sa sobrang init, plano ko po kasi 5 watts tapos naka 2P lang po na 18650
@@alienoidmartian1758 tested ko yan sir sa 5W5R na resistor, pwede din kahit 2W resistor, baguhin mo na lang ang value ng resistor, depende sa liwanag na gusto nyo po.
Please do not upload if you know nothing about the module. This modification just bypasses the main chip so might as well just plug your batteries to a wall plug to charge it up.
please do not comment anything without knowing the flow of the experiment, please read the description, i hope it helps also. that is an actual experiment, and not suggesting to use it okay?
yes i tried 2 parallel batteries many times, but its just a part of my experiment. not advisable for daily operations. that circuit need to observe in any other conditions and situations, it may cause damage.
@@AVGSolutions Opo tama po... Pero pwede po siyang 5v to 12v po... Yong bluetooth module na meron siyang digital analog po at meron siyang plug na USB at insert memory card po... Pwedeng gamitin sa Car
@@AVGSolutions Oo nga pala.. May project po kasi ako, wala po ako idea sa ganito puro DIY lang. May mga 3v plus adding resistor and 12v led po ako ginawa, then using step up converter then plug sa 220v. Problem ko po ngayon, need ko sya mapagana na hindi na gagamit ng 220v. Kaya ito nakita ko using TP4056 and TTP223. Pero since ang masusunod ay yung step up, wala na rin pala silbi.. may idea po kayo?
Possible ba na sira yung nabili ko na tp4056? Nag ilaw po kase ng red at blue ng sabay kapag chinarge ko, 1 batt lang po na 18650 gamit ko, tama naman po polarity na ginawa ko
Hello, sana mapansin mo itong comment ko. Ask ko lang kung meron kang shop na pwede naming sadyain para ipaayos yung Mosquito Killer namin. Purwisyo na kasi yung ilang beses kasing bumili tapos nasisisra dahil sa battery. :( Pls let me know kung saan located shop nyo. Sana po matulungan
Sir ask lang po yung 4.2V need ko pong ibaba ng 3V ano pong dapat gawin o gamitin stepdown or resistor po?
depende po sir s pag gagamitan nyo, kung hindi mga sensitive na components, pwedeng dropping resistor lang po.
@@AVGSolutions anong value po ng resistor sir? Pang led light lang po
Pero pwede rin po ako gumamit ng stepdown?
@@alienoidmartian1758 yes sir, pwede po ang step down, anong klaseng led po yan sir?
@@AVGSolutions yung 1watt po ang bawat isa may kanya-kanyang heatsink, pag direct po kasi ang kabit ko sa 18650 sobra po ang init po nung heatsink talagang hindi po mahawakan sa sobrang init, plano ko po kasi 5 watts tapos naka 2P lang po na 18650
@@alienoidmartian1758 tested ko yan sir sa 5W5R na resistor, pwede din kahit 2W resistor, baguhin mo na lang ang value ng resistor, depende sa liwanag na gusto nyo po.
Salamat po sa pagshare nitong video... Ganda po... And very informative...
salamat po sir
Galing mo talaga lodi ikaw n talaga 👏
sakto lang lodi, salamat sa pag daan.
bagong kaalaman na naman lodi
thanks lodi.
wow that nice sharing
thank you friend
Ayos salamat s pag share
Salamat po, stay connected
Ang galing nyo naman
thanks mam, sakto lang po
Please do not upload if you know nothing about the module. This modification just bypasses the main chip so might as well just plug your batteries to a wall plug to charge it up.
please do not comment anything without knowing the flow of the experiment, please read the description, i hope it helps also. that is an actual experiment, and not suggesting to use it okay?
Galing mo talaga idol
sakto lang idol, salamat sa walang sawang pag suporta.
I LIKE YOUR VIDEO BUT THERES A FEW DIFFERNT IRF9540 MOSFETS LISTED ON AMAZON WHICH ONE DO I ORDER ? LET ME KMNWO THANKS PHIL
any equivalent of irf9540 will do
TAMA SINABI MO BOSS ATT YOUR OWN RISK.MADALI MASIRA BATTERY MO DYAN KC PARA KANG NAG JUMPER NA CHARGER..SUBUKAN MO YUNG TP5000 NA MODULE SAFE PAYAN
salamat sa info boss.
Sir at what pin no of i.c. you connected 10 ohms....
nasa diagram po sir
Can you please tell me how to convert output 4.2 v to 1.5 V in this module ? Ampere must be 600+ mili ampere
using voltage divider or another stepdown converter is possible.
Next video naman po Bluetooth decoder at mini amplifier board 30watt two chanel
noted po sir e next inline po natin yan
@@AVGSolutions salamat po sir... Wait ko po yan😊😊😊😊
Ibig sabihin po ba sir kung 1A lang ang rate ng charger na gagamitin dyan, 1A pa rin po ang lalabas na output ?
yes sir
Will this circuit automatically cut the battery after full charge??? Please reply
yes sir, but that circuit is only an experiment and not tested for other li-on battery.
So with this menthod, can i paralel battery to 3 or 4 battery into one tp4056?
yes i tried 2 parallel batteries many times, but its just a part of my experiment. not advisable for daily operations. that circuit need to observe in any other conditions and situations, it may cause damage.
Temperature sensor schematic for this circuit
maybe soon if i'm not bc.
Waiting
salamat potits
Sir pa request naman po... Sa bluetooth module na 5v to 12v naman po...
noted po sir e next in line po natin yan, anong concept nyan sir? ung bluetooth module ang power supply ay 12volts? tama po ba?
@@AVGSolutions Opo tama po... Pero pwede po siyang 5v to 12v po... Yong bluetooth module na meron siyang digital analog po at meron siyang plug na USB at insert memory card po... Pwedeng gamitin sa Car
Kapag gunamit sir ung tp4056 n my protection,mabale wala dhil s bypass n ginawa?
dun pa rin ang protection sa charging, pero sa taas ng current, do it at your own risk
Apakah saya bisa menggunakan tipe mosfet yg lain, semisal irfz44, dan apakah nilai resistornya sama ?
yes sir
Ask ko lang po, ayos pa rin ba lagyan ng TTP223 step up converter if ganito yung set-up?
pwede naman pero ang masusunod na dun ay ung current rating ng stepup converter
@@AVGSolutions Oo nga pala.. May project po kasi ako, wala po ako idea sa ganito puro DIY lang. May mga 3v plus adding resistor and 12v led po ako ginawa, then using step up converter then plug sa 220v. Problem ko po ngayon, need ko sya mapagana na hindi na gagamit ng 220v. Kaya ito nakita ko using TP4056 and TTP223. Pero since ang masusunod ay yung step up, wala na rin pala silbi.. may idea po kayo?
Idol link nga ng transistor na ginamit mo dian .. para matry ko din .. salamat
sa deeco or alexan idol IRF9540 MOSFET Transistor 100V 23A TO-220, pwede mo din e search online.
Possible ba na sira yung nabili ko na tp4056? Nag ilaw po kase ng red at blue ng sabay kapag chinarge ko, 1 batt lang po na 18650 gamit ko, tama naman po polarity na ginawa ko
Bagong bili lang po yung batt at tp4056
try mo sir mag palit ng battery kung same pa din
@@AVGSolutions ganon parin ser, kahit lowbat na batt
lods kung mg paralel bko ng 3 na 18650 lagyan ko ng bms ? pra d masira ung battery
yes sir, yan din ang ginagawa ko lalo kapag masyado mataas ang input current, pero need mo lang talaga bantayan, baka sumabog kapag na over charge.
R3 lng nmn kailangan palitan pra maachive mo ung 2a charging
salamat sa info sir
Ilan ba output voltage niyan sir without battery attached?4.2v parin po bah?
suitable for 18650 sir, nagbabago din ang charging voltage depende sa charging current ng power source.
Boss ano tawag sa puti na yan para ma check yung amperahe
5w resistor po yan sir
bossing pwede kaya yung variable current output?
pwede rin bossing pero ibng circuitry na.
Ok lang ba kahit ano gamitin na transistor dian idol ..?
mosfet dapat idol, iba iba kasi ung pin configuration nila kapag ibng transistor
ilan batt kya nian sir
1 to 2 battery ko lang na testing sir
3:33
Is a P-channel transistor !
yes
Present idol
salamat sa suporta idol
@@AVGSolutions salamat din idol
Nagawa ko na. Yan lods pero sisirain lang ung batt mo
for experimental purposes lang yan sir.
Yahoooo
Thank you for the support
Hello, sana mapansin mo itong comment ko. Ask ko lang kung meron kang shop na pwede naming sadyain para ipaayos yung Mosquito Killer namin. Purwisyo na kasi yung ilang beses kasing bumili tapos nasisisra dahil sa battery. :( Pls let me know kung saan located shop nyo. Sana po matulungan
hello sir, san po location nyo? pm nyo po ako dito facebook.com/arduinotrainingkits
@@AVGSolutions nag chat na po ako 🙏
🤩🤩 Nice sharing 👍👍😊😊
thanks friend.
very informative lods
salamat sa suporta lods.
Fake
hindi yan fake lodi
Boss ano tawag sa puti na yan para ma check yung amperahe
anong puti po sir? ung bleeding resistor po ba?
ung bleeding resistor po ba sir?
Это резистор.