Mike... Great videos! This one was very helpful on how to make the scales on the back "pop" a bit more with the gentle coat of black. Looked great! Do you use any chrome style paints on your lures? I'd love to see how to paint over a highly reflective surface to give it that extra shimmer!
My old largemouth bass mailbox had faded albino white so I watched this video with my brother and with a selection of spray paints from Walmart went at it. If you stand back 20 feet, it looks amazing. I wish I could send you a picture of it, but I'm not that smart. (yet)
Very very good video. Although I have been making spinner baits for years, I am just starting to make wood baits and muskie lures. I just bought a 2 stage air brush. I went to hobby lobby and bought some acrylic hobby craft paint and wicked thinner in lieu of the air brush paint ie createx. Will this paint work?
Thanks for this video, I’ve been sitting on a halfway done baby bass 2.5 shallow diver because I haven’t figured out a good way to do the lateral line, I’m going to try this today
Great video thanks for your time to teach us. I’m just getting started in this hobby.i make soft baits and jigs for a Hobby .this is going to be a learning experience
great job on all the videos, very informative. I was wondering if it is possible for you to do a video on your airbrush and compressor set up paint booth and all that stuff. im looking into getting into this as a hobby but im clueless on where to start. I fish a lot and thought this would be of great satisfaction if I could catch fish on lures I made. thanks for your time
look...your painting is great.but its plastic baits.this is easy way.attempt to make a your wooden bait .than you will see how difficult it is.about your painting very nice.
Just because its plastic baits doesn't make the painting any easier. I can't produce the number of baits I need by carving wooden baits. I would never be able to get my money's worth from the time spent carving wooden baits.
I always see the paint brushes AT Walmart.. Its not necessarily with the other kids painting supplies. But I always see them there for .97c for a pack of 30.
dude, you are awesome! I love to bass fish and art. You have sparked my curiosity to get into making my own sqaure bills. Tight lines! - new subscriber
2 questions 1. what do you use to cover the bill I tried masking tape but it left a sticky residue 2. besides the basic colors white, black, red, yellow, green, and blue what 5-10 colors would you recommend getting to start with
Love your vids! Please make more, I'm learning so many awesome techniques from you. Thanks! Can you please make a short little vid on how you clean your airbrush between colors and how to reduce the colors. I'm having issues with paint clogs and probably need to reduce, just not sure how. Thanks brotha and keep doing your vids!
regarding cleaning my brush.... I pour the excess paint back into the bottle, then spray any residual paint into the cleaning station (by Iwata) then wipe it out with a paper towel. Now I pour airbrush cleaning solution in the cup and with a Qtip break up any paint sediment on the bottom then spray it all out into the cleaning station.
Thank you for showing I really appreciate it. About the drying wheel. Do you have to let them sit on the wheel The eight hours oh that's not necessary. Thanks
Angel Vega it rotates on the wheel for 8 hours Then you can turn it off and let it sit for the full 24. It can keep rotating longer it's just that 8hrs should be the minimum to prevent pooling of the clear coat
have you ever considered using Dick Nitre Lurecoat S81/ It is a bit pricey @28.00 a pint. But has a bit longer work time and is much tougher than either the deacon or the envirotex. you do have to use a drying wheel. there is a method to decant that makes this stuff last a real long time.If interested, I can explain more. Example of the toughness, I have a bait that was run over by a truck on a gravel driveway that didn't harm the finish at all.
@@luremeincustompaintedcrank3818 im still beginner learning alot from your videos and jekyll thank you got 274 2 oz bottles of acrylic paint for 20 bucks but never used that kind of paint
I take the excess paint left in the airbrush cup and pour it back into the paint bottle. Then I spray out as much of the excess paint as possible into the cleaning station (Iwata makes them ). Then I use a paper towel and wipe out the cup, THEN pour some airbrush cleaner in the cup and spray it threw the brush. Sometimes I put some cleaner in the cup and then stick a Q-Tip down in there to get some of the paint residue out from the bottom of the cup.
Lure Me In Custom Painted Crankbaits yea i do a very similar process. i even do a little more extensive after certain colors. I still get some paint residue inside the brush after it so i have to take the brush apart and do a really thorough cleaning. also paint drying on the needle tip is very frustrating, any tips to prevent that
Joe Paratore Someone else mentioned the dry paint on the tip. I haven't had that issue yet but I know its very very common for airbrush users.. Check out the forums at www.tackleunderground.com and ask how to prevent this.
+Joe Paratore when your done painting. Put a toothpick in the end. Thats what i do when using super strong luqid adhesive. Stops the tip from sealing shut
![ได้เวลา! พาน้องแฝดฉีดวัคซีนครบ 1 เดือน🫣 [cc] แดนแพทตี้ SS2 | EP.52 |](http://i.ytimg.com/vi/IzeLtaXBLNE/mqdefault.jpg)
Mike... Great videos! This one was very helpful on how to make the scales on the back "pop" a bit more with the gentle coat of black. Looked great!
Do you use any chrome style paints on your lures? I'd love to see how to paint over a highly reflective surface to give it that extra shimmer!
I've never used any chrome style paints. If you are painting over a holographic bait, I would use very transparent paints.
Wow! great looking crank bait. I love fishing cranks and seeing custom painted ones. Great job.
can you paint a pumpkin seed for us to see i would like a video on that. thanks you do great work
WOW ! your lure looks good ! Great job !
Fischer custom baits the same comment you put on marling lures channel
I own a pew shop, love the air brushing effect if you're doing battle worn paint scheme. you have some nice lures Sir.
My old largemouth bass mailbox had faded albino white so I watched this video with my brother and with a selection of spray paints from Walmart went at it. If you stand back 20 feet, it looks amazing. I wish I could send you a picture of it, but I'm not that smart. (yet)
Really like your work. 👍👍
Very very good video. Although I have been making spinner baits for years, I am just starting to make wood baits and muskie lures. I just bought a 2 stage air brush. I went to hobby lobby and bought some acrylic hobby craft paint and wicked thinner in lieu of the air brush paint ie createx. Will this paint work?
Thanks for this video, I’ve been sitting on a halfway done baby bass 2.5 shallow diver because I haven’t figured out a good way to do the lateral line, I’m going to try this today
Great video thanks for your time to teach us. I’m just getting started in this hobby.i make soft baits and jigs for a Hobby .this is going to be a learning experience
What do you put over 10 foil before you start to paint
If you are referring to holographic type foil, I would just make sure its clean and oil free.. then use transparent paints
Hey I’m just getting into this. Great instruction! Thanks for posting this video
Why don't you initial or sign/date the baits you paint? I do mine. Thanks!
Very nice job
great job on all the videos, very informative. I was wondering if it is possible for you to do a video on your airbrush and compressor set up paint booth and all that stuff. im looking into getting into this as a hobby but im clueless on where to start. I fish a lot and thought this would be of great satisfaction if I could catch fish on lures I made. thanks for your time
email me at mike@luremeincrankbaits.com I'll tell you everything you need to know to get started
do u recommend any certain brand of gold paint that I could use on spinnerbait blades
Very nicely done, instructions could not be any clearer, thank you !
Super cool man. You make some damn nice lures.
Thank you!
can you make me one because I find it hard to get a good bluegill pattern
Christian Castro these lures are for sale at www.luremeincrankbaits.com
Vince ruland thanks!!
no thank you these baits are awesome
fantastic video. thank you for sharing.
you making verry nice lures good job
look...your painting is great.but its plastic baits.this is easy way.attempt to make a your wooden bait .than you will see how difficult it is.about your painting very nice.
Just because its plastic baits doesn't make the painting any easier. I can't produce the number of baits I need by carving wooden baits. I would never be able to get my money's worth from the time spent carving wooden baits.
Great video as usual! Could you help me out with the 30 pk of brushes at Walmart? I can't find them online or in the stores.
I always see the paint brushes AT Walmart.. Its not necessarily with the other kids painting supplies. But I always see them there for .97c for a pack of 30.
Love your videos! You're like the Bob Villa of lure making. Thanks for the informative video.
Thank you Mr. Wasserman. But Bob Villa uses hammer and nails and I use an airbrush ;)
dude, you are awesome! I love to bass fish and art. You have sparked my curiosity to get into making my own sqaure bills. Tight lines! - new subscriber
Thanks Jayson! If you need some info on how to get started such as an equipment list and paint list, you. An email me at mike@luremeincrankbaits.com
2 questions 1. what do you use to cover the bill I tried masking tape but it left a sticky residue 2. besides the basic colors white, black, red, yellow, green, and blue what 5-10 colors would you recommend getting to start with
Email me at mike@luremeincrankbaits.com and I'll get you a list
Love your vids! Please make more, I'm learning so many awesome techniques from you. Thanks! Can you please make a short little vid on how you clean your airbrush between colors and how to reduce the colors. I'm having issues with paint clogs and probably need to reduce, just not sure how. Thanks brotha and keep doing your vids!
regarding cleaning my brush.... I pour the excess paint back into the bottle, then spray any residual paint into the cleaning station (by Iwata) then wipe it out with a paper towel. Now I pour airbrush cleaning solution in the cup and with a Qtip break up any paint sediment on the bottom then spray it all out into the cleaning station.
Thank you for showing I really appreciate it. About the drying wheel. Do you have to let them sit on the wheel The eight hours oh that's not necessary. Thanks
Angel Vega it rotates on the wheel for 8 hours Then you can turn it off and let it sit for the full 24. It can keep rotating longer it's just that 8hrs should be the minimum to prevent pooling of the clear coat
I see most guys using water to thin paint, but you said you've gotten away from doing that. What are you using to thin your paint?
In use an Auto Air reducer
Outstanding good sir!
Great video do you sell them? If so how can I support your great work!
Dwayne Norfleet yes I sell them www.luremeincrankbaits.com
That's awesome! What kinda pen did you use to make the gill red?
Its a Paint Pen I found at an Art Supply store
Thanks for sharing!!
How much drying does the heat set actually do? Does it just help dry it faster or does it completely dry the lure?
Its not so much for the drying aspect. It does something to pain. Like stops bubbles or something like that. I dont remember
+nick Spencer +BlizzardHockey4432 It helps it dry faster so I can move on to the next color AND completely cures the paint for a more durable finish
Mike how would you dip a lip less crank bait and put it on your drying wheel.
I used forceps to hold it on the line tie spot and clip the forceps to your drying wheel
@@luremeincustompaintedcrank3818 Thank you for the information Donnie
have you ever considered using Dick Nitre Lurecoat S81/ It is a bit pricey @28.00 a pint. But has a bit longer work time and is much tougher than either the deacon or the envirotex. you do have to use a drying wheel. there is a method to decant that makes this stuff last a real long time.If interested, I can explain more. Example of the toughness, I have a bait that was run over by a truck on a gravel driveway that didn't harm the finish at all.
David Sullivan I have since switched over to KBS diamond clear
Know nothing about it, but hope it does great things for you. I'm fascinated with your paint jobs. Thank you for sharing all the info.
David Sullivan KBS Diamond Clear is very durable and you dip the baits and hang them to dry. Very quick and efficient
How do u use acrylic paints in the airbrush ?
Mathieu-Charles Mongrain some are Airbrush ready. some I have to thin with Reducer.
@@luremeincustompaintedcrank3818 im still beginner learning alot from your videos and jekyll thank you got 274 2 oz bottles of acrylic paint for 20 bucks but never used that kind of paint
mike when you epoxy your lure and put it on the drying wheel how long
do you let the drying wheel run.
Donnie 6-8 hours at a minimum. I now use a different clearing method. Alumilite UV. Cures in 30-60 min
Lure Me In Custom Painted Crankbaits you have any info on making your uv box?
Steven Reed email me at Mike@luremincrankbaits.com. I can send you info
how bout painting a pumpkin seed bait. great work and thanks
Scott Crabtree he did
Scott Crabtree th-cam.com/video/WrbgoCUbPLQ/w-d-xo.html
Thank you
What epoxy do you use? I can't seem to find the right stuff.
I guess I should've asked does the devcon turn yellow over time in the sun?
Corey not that I know of. I have since switched to a couple others. Envirotex Lite and KBS Diamond clear
awesome! Thank you so much. Me and my buddy are just getting into this and have studied your videos religously.
What kind of spray gun do you use?
Iwata Eclipse HP-CS
Thanks im looking at getting in to painting my cranks as well.
how do you do your color changes? what do you use to clean out the brush between colors?
I take the excess paint left in the airbrush cup and pour it back into the paint bottle. Then I spray out as much of the excess paint as possible into the cleaning station (Iwata makes them ). Then I use a paper towel and wipe out the cup, THEN pour some airbrush cleaner in the cup and spray it threw the brush. Sometimes I put some cleaner in the cup and then stick a Q-Tip down in there to get some of the paint residue out from the bottom of the cup.
Lure Me In Custom Painted Crankbaits yea i do a very similar process. i even do a little more extensive after certain colors. I still get some paint residue inside the brush after it so i have to take the brush apart and do a really thorough cleaning. also paint drying on the needle tip is very frustrating, any tips to prevent that
Joe Paratore Someone else mentioned the dry paint on the tip. I haven't had that issue yet but I know its very very common for airbrush users.. Check out the forums at www.tackleunderground.com and ask how to prevent this.
+Joe Paratore when your done painting. Put a toothpick in the end. Thats what i do when using super strong luqid adhesive. Stops the tip from sealing shut
+BlizzardHockey4432 hope you aren't implying putting a toothpick in the airbrush
How do you like the KBS diamond coating?
Ken Mitchell love it!!!
LOL i just ordered some in a spray can. I hope it works. If not i will try the canned stuff. Do you hang or put on a wheel?
and does is cover the eye that is lowest if you hang it?
Ken Mitchell the canned stuff isn't that bad. Odor dissipates fast. I dip twice with a 24 cure in between. Covers everything well!
Awesome, I will give it a shot. The devcon is a pain in the ass when doing baits with holes.
where do you get your baits from
Www.dingerbaits.com, www.dakotalakestackle.com, www.predatorbassbaits.com, www.wlure.com
Thanks. .
Like your videos
What mm eyes do you use?
Logan Black depends on the bait but this one uses 6mm.
Lure Me In Custom Painted Crankbaits is that a 2.5 or 1.5? I'm going to start off with some 1.5's what size would you recommend with them?