I’ve been struggling for months with this! I can’t believe all I had to do was check youngnails as alwayssss, you guys help with absolutely everything lol 😍
Got it girls? It’s official, young nails sanction a bit of ‘rough’ every now and then! I guess nails are like men, too smooth and they get slippery and nothing sticks to them! 🤪 seriously though, great tips well presented thank you x
I am ha big trouble with my top coat doing the puddling this this videos example. My color coats don’t have that problem. It’s only the top coat, I use kiara sky everything so I don’t k ow why the top coat isn’t sitting well with the color coats. Could you help me?
OMG thank you so much. I was noticing my gel wasnt laying nicely. I was taught in school to buff the nail before putting gel polish on. I cannot roll my eyes enough that a TH-cam video taught me better then my schooling did.
Literally everytime I have a problem on my nails I come on TH-cam and YoungNails saves me by suggesting the right videos at the right time! Thanks again for the help! I fixed my top coat with NO BUBBLING and other nonsense
This has only happened with top coat for me once with ricca gel and now most recently with kiara sky...I've never had this issue with mani Q, one step, kokoist etc...I've tried EVERYTHING and unfortunately this did not work either...my only other conclusion is that I need to buy and use Kiara sky top coat 🤷🏾...SUPER FRUSTRATED THOU
Thank you sooo much! All the way from the colors to my top were puddling I didn’t know what to do, I was so disappointed and thinking I had bought products that were too cheap lol
I recently finished my nails with a top coat and noticed the shrinking. My color is completely fine, just the top coat is shrinking. What did I do wrong? 😔
I also have the same problem! I'm wondering if I could repeat the buffing process before top coat so there's a rough surface for the top coat to grip onto.
Make sure you aren't cleansing the tacky surface from the color before applying the top coat. If you do, this will leave a shiny surface that can cause the product to pull away. Also, if you apply some top coats too thin, it can leave bare spots as well. Make sure you use a good amount of top coat to fully cover the nail.
Great tips. But what can you do when you make chrome nails? Then you can’t buff it because the chrome powder is buffed on top of the topcoat... and then it’s so smooth and the topcoat slides off
Stine Kirkeby Chrome nails should still work because don't you rub the chrome powder in to a top coat? The top coat will stick to the rougher enhancement but finish glass smooth so it shouldn't be a problem.
I make press on nails on a display and I have an issue with the nail becoming small at the end and not fitting right anymore. I wanted to know if I could file the clear press on nail, then add protein bond, skip base gel polish and go straight to a colored polish, cure and bam I’m done…, or should I file the clear press on nail, add protein bond, and always add a base gel no matter what, and then add colored gel polish? I feel the more layers of gel I apply might be causing the nail to not fit the same and fit smaller once the designs are completely done and ready to be worn.😞
Having the same problem, How did you solve this issue? the nail sometimes becomes too tight and doesn't fit well. Really troblesome experience for the customer😔
And when you are polishing with gel polish and at the end you are going to use top coat, why it puddles? if the gel polish has inhibition layer, better saying you are using a 3 set gel polish system and at the end the gel top coat does that. How can you prevent it?
I’m having this same problem , gel colors work for me but when I apply my gel top coat it’s puddling and separating. I don’t know how to stop it from doing that :/ I’m not sure if it’s due to cold weather ?
@@youngnailsinc I'm having the very same issues with my no wipe top coats as well. It's so frustrating!! The main ones that do it are aprés, Shine E & Venalisa Tempered Top... The only one I seem to not have this issue with is my Gelish topcoat but that's not a no wipe... help please.
Nice tips! I don’t work with acrylic but my co workers who do have these issues. I find that gel slicks very well to gel builder even if it’s buffed but I do have these pulling issues with gel polish, could I add protein bond after a base layer for gel polish to fix this issue??
I LITERALLY JUST HAD THIS PROBLEM TONIGHT!!!! And I’ve been having it for a while now, and could not figure out why. I thought maybe it was my polishes!! thank you so much for this
Thank you SO much for this video. I've been looking everywhere for a fix for this. In Nail school they keep telling me the polish is bad if this happens.... AND to buff the nail before polish/topcoat application. I have an additional question about this occurring: sometimes I find this happens when I apply top coat over gel polish, where this video only covers polish application over an enhancement. Should I be roughing up the polish, adding Protein Bond and then top coating? this seems like it would be very tedious. Again, thank you SO much for all your amazing content!
The main reasons why top coat would pull away from gel polish (over an enhancement or a gel manicure), would be if the gel polish doesn't have a tacky finish or if the tacky finish has been wiped off. The top coat won't stick to a smooth or shiny surface. You want to make sure you don't wipe the tacky surface off before applying top coat. If you do wipe it, you may need to lightly buff the nail to remove the shine and then apply Protein Bond.
An 80/80 grit file or buffer is very coarse. The only time we would recommend using something this abrasive would be if you are hand filing off an MMA product.
I have no issue with applying the color, it’s just the no wipe top coat. Even tried etching the color coat to no avail. Really makes applying chrome powders a nightmare.
We're sorry you're having challenges! Please contact our customer service team or text us and we will be happy to troubleshoot! Contact customer service by phone at 1.800.777.9170 or by email at info@youngnails.com or text (714) 274-7323
What about natural nails with gel polish …. I file nails the protein bond then base when I put polish on it shrinks away from cuticle and free edge …I’ve been doin nails over 20 yrs and reg polish never had prob with and i barely do natural nail clients but when i do w gel polish this happens
Make sure you are cleansing the nails with Swipe prior to applying Protein Bond. If you are using other cleansers, this could still be leaving a slight residue barrier which can cause the gel to pull away.
Can you tell me what to do when I’ve already put my gel color on, had no puddling or shrinkage but then I put my top coat on it puddles everywhere? This is the only issue I have and I can’t figure it out for the life of me 😩
Pulling or puddling is usually caused by not applying enough product or if the surface is too smooth. Make sure you are not wiping the tacky surface from your color before applying the top coat.
I had this happen with a favourite gel polish, today. The base was a gel overlay with matte topcoat. Too smooth I guess. I won’t forget the Protein Bond, either! That product is magic!
After filing/finishing the nails with the 150 grit, dust the nail off, lightly cleanse with Swipe & then apply Protein Bond before your gel polish/paint.
In order to keep your product from puddling or pulling away, make sure that you file the nail surface with nothing finer than a 150 grit file. Do not use a buffer as this will make it too smooth. After filing, cleanse with Swipe and apply one coat of Protein Bond. Then you can apply your color. If you are working with the full coverage tips, the same still applies. You want to make sure you remove the shine from the surface with a 150 grit file or a medium arbor band. Dust off the nail but do not use Swipe to cleanse the nail as this can smooth the plastic out again. Apply Protein Bond and then your color.
Ok so what if I add gel nail art after file and buff and it still does puddling , I can’t go back and file again and take nail art off? Or what am I doing it wrong ??
Before you do you design, make sure that you are only filing with a 150 grit file, not buffing. When you buff, this smooths out the surface too much and the gel can bleed or puddle. After filing, cleanse with Swipe and apply a coat of Protein Bond. If you are following these steps and are still getting puddling or your product is moving, you may have to freeze each nail after applying your gel so it doesn't move.
I make press on nails and when I’m done with all my art it seems they have shrunk and no longer fit. Is this due to gel polish shrinking or the gel tip that I use shrinking in the lamp? I hope my question makes sense. I’m desperate to fix this issue before I launch in a few months.
Pulling or puddling is usually caused by not applying enough product or if the surface is too smooth. Make sure you are not wiping the tacky surface from your color before applying the top coat. Here's a video that may help a little more! th-cam.com/video/s6z1G1VbBls/w-d-xo.html
AH HA! THAT IS WHY I HATED GEL POLISHES! THANKS FOR THE GREAT TIP! AH RATS NOW I'VE GOT TO SAVE UP FOR YOUR AMAZING CAPTION LINE & SHELF! WAHOO NO MORE BUFFERS TO BUY!!YIPPIE
I have experienced this same exact thing but in a different way. By that I mean, just before i apply gel polish or top coat etc..my clients would either touch their hair or use their hand to prop their chin or somehow make contact with their skin etc. Amd the gels would pull and puddle. So i assumed its oils from the hair or skin getting on the surface of the nails. This would happen after I cleanse the nails with alcohol. I dont know if after that step they get bored and want to touch everything lol.
Ether try a thicker amount, (it needs to be a little thicker application.) Or try buffing the surface a bit then adding protein bond prior to application
Yes, even with a natural nail, you want to make sure the surface isn't too smooth as the product will pull away. We recommend prepping your natural nails with the medium arbor band to remove the shine, cleanse with Swipe and apply Protein Bond for the best adhesion.
I layed down a base coat over fiber gel to encapsulate gold flakes and it separated and left dents all over the nail which I had to file away which took more time. Tips ? ( I did not file or buff before )
Awesome tip, thank you I had this happen to me the last set I did on myself and I thought it was my lamp or I had some kind of oil residue on my nail. It was driving me crazy.👍👍👍👍
Brilliant advice....as always. I Never watch a video of yours without learning something new that I can use immediately. Thank you! Oh yes...#number2 😁
Why doesn’t protein bond come in bigger bottles? I’ve been using Light Elegance Tack because it comes in big bottles but I like YN better. Can i put multiple bottles in one if you don’t plan to make them bigger?
The formula actually does not hold the same when produced on larger scale. The quality changes and we would never want to compromise such a great product so we keep it in the size it is. It's been tested.
YoungNailsInc ahhh gotcha. I thought it may have something to do with that. And if I have your attention still, quality & acrygel, yay or nah? That seem like a compromised formula like unscented acrylic. It just doesn’t feel right to me and YN doesn’t have it which leads me to believe that because I know you guys are all about keeping the integrity of your product. Good product or is the chemistry not all there? Thanks!
If it's happening on gel polish, most likely it's because the gel polish you are using doesn't have a tacky finish or it has been wiped off. If either of these are what's happening, you would need to go back and gently remove the shine, apply Protein Bond & then apply top coat.
Roughing up the surface totally makes sense, but I have problems with shrinkage when putting color on top of base coat (on natural nails). What would be the solution for that?
Make sure that you aren't using anything finer than a 150 grit file (not a buffer) or a medium arbor band to remove the shine. Cleanse the nail with Swipe and apply one coat of Protein Bond, making sure to cap the free edge. If you are using other cleansers, they may still be leaving residue on the nail. Additionally, make sure your clients aren't touching their nails at any point in the process (especially scratching their skin or touching their face, etc) as this can get oils on the nails.
@youngnailsinc 150 grit! I rewatched that video like 5 times, assuming I missed the grit! What is the most course you would go? 1. For gel over acrylic 2. For thin, pigmented gel paints or polishes over builder gel or acrylic 3. Over chrome..?
That's what that's called! Puddling! I've always wondered why my gel paints would do that. I just assumed I had cheap gel paints. Thanks very much!
omg same!
You guys literally cover all the issues like no other! I get so many tips and tricks from y'all! Thank you!!
I’ve been struggling for months with this! I can’t believe all I had to do was check youngnails as alwayssss, you guys help with absolutely everything lol 😍
❤️❤️
Got it girls? It’s official, young nails sanction a bit of ‘rough’ every now and then! I guess nails are like men, too smooth and they get slippery and nothing sticks to them! 🤪 seriously though, great tips well presented thank you x
I am ha big trouble with my top coat doing the puddling this this videos example. My color coats don’t have that problem. It’s only the top coat, I use kiara sky everything so I don’t k ow why the top coat isn’t sitting well with the color coats. Could you help me?
I havent had any luck with her stuff try their stuff you'll be in love it's a million times better quality 😍
I know this happened but didn't know the term especially for the chrome
OMG thank you so much. I was noticing my gel wasnt laying nicely. I was taught in school to buff the nail before putting gel polish on. I cannot roll my eyes enough that a TH-cam video taught me better then my schooling did.
Literally everytime I have a problem on my nails I come on TH-cam and YoungNails saves me by suggesting the right videos at the right time! Thanks again for the help! I fixed my top coat with NO BUBBLING and other nonsense
This has only happened with top coat for me once with ricca gel and now most recently with kiara sky...I've never had this issue with mani Q, one step, kokoist etc...I've tried EVERYTHING and unfortunately this did not work either...my only other conclusion is that I need to buy and use Kiara sky top coat 🤷🏾...SUPER FRUSTRATED THOU
Nice! I knew to leave it rough but I didn’t even think about turning the hand and creating one direction grooves.
Thank you sooo much! All the way from the colors to my top were puddling I didn’t know what to do, I was so disappointed and thinking I had bought products that were too cheap lol
Happy to help!
I recently finished my nails with a top coat and noticed the shrinking. My color is completely fine, just the top coat is shrinking. What did I do wrong? 😔
I also have the same problem! I'm wondering if I could repeat the buffing process before top coat so there's a rough surface for the top coat to grip onto.
@@karenhsu9976 🤔 Not a bad idea!
Make sure you aren't cleansing the tacky surface from the color before applying the top coat. If you do, this will leave a shiny surface that can cause the product to pull away. Also, if you apply some top coats too thin, it can leave bare spots as well. Make sure you use a good amount of top coat to fully cover the nail.
Fantastic video Greg. Thank you so much for the tips and tricks.
Great tips. But what can you do when you make chrome nails? Then you can’t buff it because the chrome powder is buffed on top of the topcoat... and then it’s so smooth and the topcoat slides off
Stine Kirkeby Chrome nails should still work because don't you rub the chrome powder in to a top coat? The top coat will stick to the rougher enhancement but finish glass smooth so it shouldn't be a problem.
You can also apply a little Protein Bond around the edges.
What tips do you have to prevent shrinking when doing gel polish on a natural nail?
Make sure you are preping the nail properly
And cleaning off all dust and oils
Also you can put a little Protein Bond on the very tip of the nail.
I make press on nails on a display and I have an issue with the nail becoming small at the end and not fitting right anymore.
I wanted to know if I could file the clear press on nail, then add protein bond, skip base gel polish and go straight to a colored polish, cure and bam I’m done…, or should I file the clear press on nail, add protein bond, and always add a base gel no matter what, and then add colored gel polish? I feel the more layers of gel I apply might be causing the nail to not fit the same and fit smaller once the designs are completely done and ready to be worn.😞
We like to remove shine from the full cover tips because gel adheres better to a textured surface.
Having the same problem, How did you solve this issue? the nail sometimes becomes too tight and doesn't fit well.
Really troblesome experience for the customer😔
The tips and trick's u guy's give are just incredible👌 Amazing! Ty for the share guy's. Great video!
This was exactly my question last week. TY SO MUCH FOR DOING THIS VIDEO!
I am addicted to these videos! And this is what I have missed for years reason my gel never sticks and shrinks!
Thank you for the tip! I think as professionals we are so use to striving for perfection that we forget that we need a bit of roughness!
And when you are polishing with gel polish and at the end you are going to use top coat, why it puddles? if the gel polish has inhibition layer, better saying you are using a 3 set gel polish system and at the end the gel top coat does that. How can you prevent it?
which top coat are you using?
I’m having this same problem , gel colors work for me but when I apply my gel top coat it’s puddling and separating. I don’t know how to stop it from doing that :/ I’m not sure if it’s due to cold weather ?
@@youngnailsinc I'm having the very same issues with my no wipe top coats as well. It's so frustrating!! The main ones that do it are aprés, Shine E & Venalisa Tempered Top... The only one I seem to not have this issue with is my Gelish topcoat but that's not a no wipe... help please.
You guys are true nail Guru's. I have learned so much from your you tube videos. Thank you for all your time and effort.
Great tip. I’d always flash cure so the gel wouldn’t move. ;)
Nice tips! I don’t work with acrylic but my co workers who do have these issues. I find that gel slicks very well to gel builder even if it’s buffed but I do have these pulling issues with gel polish, could I add protein bond after a base layer for gel polish to fix this issue??
apply the protein bond before you apply the base layer. :)
I always learn something new.... Thanks Greg 😀😉👍
I LITERALLY JUST HAD THIS PROBLEM TONIGHT!!!! And I’ve been having it for a while now, and could not figure out why. I thought maybe it was my polishes!! thank you so much for this
wow zero thumbs down, that's great! ty for the awesome info :)
❤️❤️
Thank you for these tips! I wish I could come train with Young Nails, I love these techniques, tips and tricks - like a gold mine of info 💞
Thank you SO much for this video. I've been looking everywhere for a fix for this. In Nail school they keep telling me the polish is bad if this happens.... AND to buff the nail before polish/topcoat application. I have an additional question about this occurring: sometimes I find this happens when I apply top coat over gel polish, where this video only covers polish application over an enhancement. Should I be roughing up the polish, adding Protein Bond and then top coating? this seems like it would be very tedious. Again, thank you SO much for all your amazing content!
The main reasons why top coat would pull away from gel polish (over an enhancement or a gel manicure), would be if the gel polish doesn't have a tacky finish or if the tacky finish has been wiped off. The top coat won't stick to a smooth or shiny surface. You want to make sure you don't wipe the tacky surface off before applying top coat. If you do wipe it, you may need to lightly buff the nail to remove the shine and then apply Protein Bond.
What if the buffer is a 80 80 grit?
An 80/80 grit file or buffer is very coarse. The only time we would recommend using something this abrasive would be if you are hand filing off an MMA product.
Can anyone give me a tip on how to use chrome powder & then put the top coat on AND NOT HAVE PITTING OR SHRINKAGE? I’m desperate 🥵
th-cam.com/video/5PLYlT-yOkI/w-d-xo.htmlsi=3fRmiQNiAnvZmOTY
I have no issue with applying the color, it’s just the no wipe top coat. Even tried etching the color coat to no avail. Really makes applying chrome powders a nightmare.
We're sorry you're having challenges! Please contact our customer service team or text us and we will be happy to troubleshoot! Contact customer service by phone at 1.800.777.9170 or by email at info@youngnails.com
or text (714) 274-7323
Why can't anyone just get to the point??!!
What about natural nails with gel polish …. I file nails the protein bond then base when I put polish on it shrinks away from cuticle and free edge …I’ve been doin nails over 20 yrs and reg polish never had prob with and i barely do natural nail clients but when i do w gel polish this happens
Make sure you are cleansing the nails with Swipe prior to applying Protein Bond. If you are using other cleansers, this could still be leaving a slight residue barrier which can cause the gel to pull away.
Can you tell me what to do when I’ve already put my gel color on, had no puddling or shrinkage but then I put my top coat on it puddles everywhere? This is the only issue I have and I can’t figure it out for the life of me 😩
Pulling or puddling is usually caused by not applying enough product or if the surface is too smooth. Make sure you are not wiping the tacky surface from your color before applying the top coat.
I had this happen with a favourite gel polish, today. The base was a gel overlay with matte topcoat. Too smooth I guess. I won’t forget the Protein Bond, either! That product is magic!
I’ve been having the puddling problem… so at what point do I use swipe?
After filing/finishing the nails with the 150 grit, dust the nail off, lightly cleanse with Swipe & then apply Protein Bond before your gel polish/paint.
@@youngnailsinc THANK YOU SO MUCH 💕💕🫧
I tried again did as you said I’m still having some puddling. What could I be doing wrong
Can you tell us what specific products you’re using and the steps of your procedure?
Why when I apply the gel polish and put it under the Light it feels like is burning 🔥 my fingernails???
th-cam.com/users/shortsBubR43svLAA
I still need a better explanation. Exactly what do I do? Does this work for full cover tips as well?
In order to keep your product from puddling or pulling away, make sure that you file the nail surface with nothing finer than a 150 grit file. Do not use a buffer as this will make it too smooth. After filing, cleanse with Swipe and apply one coat of Protein Bond. Then you can apply your color. If you are working with the full coverage tips, the same still applies. You want to make sure you remove the shine from the surface with a 150 grit file or a medium arbor band. Dust off the nail but do not use Swipe to cleanse the nail as this can smooth the plastic out again. Apply Protein Bond and then your color.
I really needed this one!! Thanks guys 💜💜
Ok so what if I add gel nail art after file and buff and it still does puddling , I can’t go back and file again and take nail art off? Or what am I doing it wrong ??
Before you do you design, make sure that you are only filing with a 150 grit file, not buffing. When you buff, this smooths out the surface too much and the gel can bleed or puddle. After filing, cleanse with Swipe and apply a coat of Protein Bond. If you are following these steps and are still getting puddling or your product is moving, you may have to freeze each nail after applying your gel so it doesn't move.
I make press on nails and when I’m done with all my art it seems they have shrunk and no longer fit. Is this due to gel polish shrinking or the gel tip that I use shrinking in the lamp? I hope my question makes sense. I’m desperate to fix this issue before I launch in a few months.
Thanks guys once again great tip there❤️
What can i do when my topcoat does the pulling and schrinkage only on top of gelpolish ?
Pulling or puddling is usually caused by not applying enough product or if the surface is too smooth. Make sure you are not wiping the tacky surface from your color before applying the top coat. Here's a video that may help a little more! th-cam.com/video/s6z1G1VbBls/w-d-xo.html
Very good explanation
AH HA! THAT IS WHY I HATED GEL POLISHES! THANKS FOR THE GREAT TIP! AH RATS NOW I'VE GOT TO SAVE UP FOR YOUR AMAZING CAPTION LINE & SHELF! WAHOO NO MORE BUFFERS TO BUY!!YIPPIE
I have experienced this same exact thing but in a different way. By that I mean, just before i apply gel polish or top coat etc..my clients would either touch their hair or use their hand to prop their chin or somehow make contact with their skin etc. Amd the gels would pull and puddle. So i assumed its oils from the hair or skin getting on the surface of the nails. This would happen after I cleanse the nails with alcohol. I dont know if after that step they get bored and want to touch everything lol.
Sometimes the finish shrinks on top of the nail and creates holes when i pout it over mission control designs
I have the same issue, Greg do you have a solution for this?
If your going to use finish over mission control. Cure mission control for 30seconds.
Jill Parrish I've had this happen also, mine almost looks like a hunnycomb
You might need to apply more during the application. You could also apply Protein Bond over the top of Mission Control.
I get the pulling when i use yn stain resistant top coat ontop of color gel
Ether try a thicker amount, (it needs to be a little thicker application.) Or try buffing the surface a bit then adding protein bond prior to application
Thanks for the 411!! Happy St. Pattys day weekend! Party Responsibly
Qué blanco más hermoso!! y ustedes un Amor gracias
Omg thank you so much for this video., 👊🏽❤️
Welcome!!
Can we also do this with natural nails before gel polish. ?
Yes, even with a natural nail, you want to make sure the surface isn't too smooth as the product will pull away. We recommend prepping your natural nails with the medium arbor band to remove the shine, cleanse with Swipe and apply Protein Bond for the best adhesion.
I layed down a base coat over fiber gel to encapsulate gold flakes and it separated and left dents all over the nail which I had to file away which took more time. Tips ? ( I did not file or buff before )
What kind of base coat was used and did you wipe the sticky layer off of the Fiber Gel before applying the base?
@youngnailsinc it was a beetles base coat (usually works well w others) and i did not wipe off the layer because i did not want to ruin the design 🥺
I love protein bond but I've for sure experienced pulling and shrinkage. I'd have never guessed it was a product of the smooth surface.
I wanna cry 😭😭 for thank you so much 🙏🙏🙏🙏
Awesome tip, thank you I had this happen to me the last set I did on myself and I thought it was my lamp or I had some kind of oil residue on my nail. It was driving me crazy.👍👍👍👍
Your videos and tips on nails R super, always very educational, thanks so much for always shareing with us😊💅💅💅
Brilliant advice....as always. I Never watch a video of yours without learning something new that I can use immediately. Thank you! Oh yes...#number2 😁
What file/grit are you using? :)
We are using a 150 grit hand file to get the texture you want.
Greg thank you for this amazing video, you have solved all my problems 👍👍👍
Thank you so much Daddy u just solved my problem
Thanks a million, appreciate this video, . Indeed i have had this problem. And this video has helped me out so much, cheers,. Xxx
That you so much.
Please be careful with Swipe. I used it three times and the skin around my nails has never been the same. Great tutorial as always though!
Wonderful breakdown of how and why shrinking etc happens! I adore the way you explain thing's to us. Thank you and much love as always!
#MYFAVNAILBROS
Very good tip... I've always buffed. Now we know 😉
Hello, which brush did Greg use to apply the gel paint?
This is exactly what I've been doing for a while now. Works perfectly, thank you!
Thank you so much for this! I have shrinkage with some polishes and it drives me nuts! I have to do them one by one.
THANK YOU !!!!!
Aww geez, I didn't realize this! Thank you thank you!☺️
You guys are amazing! And thank you for sharing your knowledge A+..👍
That's a great idea Greg, will have to try and it and see if I get puddling when I apply my gel polish/paints. xx
Why doesn’t protein bond come in bigger bottles? I’ve been using Light Elegance Tack because it comes in big bottles but I like YN better. Can i put multiple bottles in one if you don’t plan to make them bigger?
The formula actually does not hold the same when produced on larger scale. The quality changes and we would never want to compromise such a great product so we keep it in the size it is. It's been tested.
YoungNailsInc ahhh gotcha. I thought it may have something to do with that. And if I have your attention still, quality & acrygel, yay or nah? That seem like a compromised formula like unscented acrylic. It just doesn’t feel right to me and YN doesn’t have it which leads me to believe that because I know you guys are all about keeping the integrity of your product. Good product or is the chemistry not all there? Thanks!
Happens too often and I always end up re filing with 180 lol
no
Thank you for uploading this amazing video😊
Oi!!🙈😭 Wish I had seen this tutorial earlier....literally my gel polish from earlier today is puckered 🤦♀️ Thanks for the tips guys!!!
Glad we could help!
Can we get a video on how to apply nail polish and dry it / know when it’s dry ?
Great video! Thanks a lot from Chile.
I dont have protein bond. What can I use.
Thanks for the tip it's very important :-D
What if it’s on natural nails? What file should be used to prevent pitting of the base and gel color
What grit file are you using to remove shine from the natural nails?
What are you using to cleanse the natural nail?
What grit file did you use. Great video
Nice and clean !
Nice and tight !
Love that.....
Muchísimas gracias me salvo la vida
Thank you both I have learnt so much from you guys ❤️
I get this when I apply hard gel 😩 🤔
Great information Gregg, protein bond is the best.
What about when this happens with the top coat over gel polish would you still go in and buff the gel polish ?
If it's happening on gel polish, most likely it's because the gel polish you are using doesn't have a tacky finish or it has been wiped off. If either of these are what's happening, you would need to go back and gently remove the shine, apply Protein Bond & then apply top coat.
OMG I HAD TO DO A ALL WHITE SET AND SOME FINGERS WHERE SERIOUSLY STRESSING ME TF OUT! 🤦🏽♀️😂
So stressful!
Thank you for sharing 😘❤ very very useful!!! You guys just amazing!!! 😊🤗😘
💖😁 thank you
Awesome thank you 🙏 I was having this issue.
Roughing up the surface totally makes sense, but I have problems with shrinkage when putting color on top of base coat (on natural nails). What would be the solution for that?
Make sure that you aren't using anything finer than a 150 grit file (not a buffer) or a medium arbor band to remove the shine. Cleanse the nail with Swipe and apply one coat of Protein Bond, making sure to cap the free edge. If you are using other cleansers, they may still be leaving residue on the nail. Additionally, make sure your clients aren't touching their nails at any point in the process (especially scratching their skin or touching their face, etc) as this can get oils on the nails.
@youngnailsinc 150 grit! I rewatched that video like 5 times, assuming I missed the grit! What is the most course you would go?
1. For gel over acrylic
2. For thin, pigmented gel paints or polishes over builder gel or acrylic
3. Over chrome..?
Thanks definitely going to use this tip.
Thanks,thanks,and thanks. You are the best!
What would you do on a natural nail?
I forgot to add that you were about gel polish just to clarify.
Hi, use a medium grit buffer and cleanse the nail with swipe. I like to apply Protein Bond on the very tip of the nail and then go into your Base.
Thanks for the great advice!! I am learning how to do Gel nails at home on myself and your posts have helped a TON!
Awesome 😎
How do you prevent gel top coat form pooling on chrome power finishes?
Depends what top coat you are using not all top coats can be applied to a smooth non tacky surface. Gloss works great over chromes