Electronics Workbench Tour | Electrical Engineering Tutorials from CircuitBread

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ย. 2024

ความคิดเห็น • 39

  • @mmka5434
    @mmka5434 3 ปีที่แล้ว +9

    Electrical Engineering stuff is so cool, especially when it gets difficult and needs a lot of concentration, thereby making one become absorbed in it and forget about the chaos in the outer world.
    You got a great job, man 👌

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว +4

      I totally agree - soldering in particular makes me zen. If I get frustrated or distracted, my hands shake, so I have to calm down, slow it down, and just focus. It's very nice. Thanks!

  • @eons_of_ions8651
    @eons_of_ions8651 3 ปีที่แล้ว +3

    Never heard multimeter pronounced that way before. First for everything I suppose.
    Cool lab 👍

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว

      Honestly, I'm starting to wonder if that's an Idaho thing or just a "me" thing. I don't know. 😂

    • @TheConstitutionalGuardian
      @TheConstitutionalGuardian 3 ปีที่แล้ว +1

      @@CircuitBread By definition, it is the proper way of saying it; in the 28+ years in this industry, I've never heard this way. I say it to as a conversation starter.

  • @MrJruta
    @MrJruta 3 ปีที่แล้ว

    Great stuff. My wife just gave me an early Christmas present, a fantastic bench. Just putting my things together- it’s nice not having to work out of boxes lol.

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว +1

      Awesome! I actually just moved and am in a weird limbo right now where I'm back to working out of boxes until I can get things set back up again. It is definitely a pain!

  • @primayogabudyprawira4223
    @primayogabudyprawira4223 3 ปีที่แล้ว +1

    Great content man !!

  • @allenthomas2660
    @allenthomas2660 3 ปีที่แล้ว +1

    Awesome video

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว

      Thanks Allen, glad you enjoyed it!

  • @GaryCrowellJr
    @GaryCrowellJr 3 ปีที่แล้ว

    perfect Laren impression! LOL

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว

      Not an impression, his mannerisms are just rubbing off on me!

    • @ikercrew8830
      @ikercrew8830 3 ปีที่แล้ว

      dunno if you guys gives a shit but if you guys are stoned like me atm then you can stream all the new series on instaflixxer. Have been binge watching with my girlfriend for the last few weeks xD

    • @enzotroy3522
      @enzotroy3522 3 ปีที่แล้ว

      @Iker Crew definitely, I have been using InstaFlixxer for since november myself :D

    • @felixjonas77
      @felixjonas77 3 ปีที่แล้ว

      @Iker Crew definitely, have been using InstaFlixxer for years myself :D

    • @GaryCrowellJr
      @GaryCrowellJr 3 ปีที่แล้ว

      @@ikercrew8830 Yah this instaflixxer looks like the real deal NICE!

  • @yazeedmansari9185
    @yazeedmansari9185 3 ปีที่แล้ว

    It was an amazing video. One question "not related to video's topic :)", which substance is better and helpful when using diodes, Ge or Si?

    • @yazeedmansari9185
      @yazeedmansari9185 3 ปีที่แล้ว

      Also, I like your channel a lot. Thumbs up guys and step by step you'll reach your goal and will have more engineers to share your experience with.

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว +4

      Depends on what you're wanting to do! Germanium has a lower forward voltage and is better at higher frequencies than silicon but silicon is cheaper and usually are more resistant to higher reverse voltages and greater temperature. Though, other than cost and forward voltage, the way the diode is manufactured makes it a big difference in their performance. Hope that helps!

  • @ObservantAlchemist
    @ObservantAlchemist 3 ปีที่แล้ว

    Nice video bro !

  • @informationandmotivation6638
    @informationandmotivation6638 3 ปีที่แล้ว

    I want to check factory power quality...how it can be done

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว

      Like power factor or how clean the signal is? I've never done a practical power factor calculation, so I assume it would be harder as you need to measure both current and voltage of a load at the same time and see how much of a phase shift there is. Checking for ripple or noise is easy enough if you have an oscilloscope - just hook it up and measure the unwanted noise as a ratio of the wanted signal. Is this what you were looking for?

    • @evanjenkins131
      @evanjenkins131 2 ปีที่แล้ว

      fluke PQA

  • @lillykovar3265
    @lillykovar3265 3 ปีที่แล้ว +4

    Where on this God’s Earth is a multimeter pronounced "m’ltim’ter"?

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว +3

      Idaho? 😂
      Actually, funny story, when I was a 9 year old kid living in California, my 3rd grade teacher kept correcting me saying kilometer is pronounced "kill - AH - miter" (with a short "i" sound on the last syllable) because I kept saying "kill - o - meter". Moved to Idaho that next year and my 4th grade teacher kept correcting me and telling me I needed to say "kill - o - meter". Here I was, ten years old, unbelievably confused. Things have not changed much for me since then.

    • @lillykovar3265
      @lillykovar3265 3 ปีที่แล้ว +1

      @@CircuitBread That’s hilarious, I didn’t know you guys accent it that way out there, it sounds so strange hearing it

    • @arthurmead5341
      @arthurmead5341 3 ปีที่แล้ว

      @@CircuitBread no way, circuitbread is in idaho? I'm in boise

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว +1

      Hey Arthur! Yep, our office is close to St. Al's in Boise and my previous house, where we shot the tutorials at the desk (like this one), is near Bown Crossing. But.... I (Josh) just moved to eastern Idaho this last week and will drive back to Boise occasionally to shoot videos and stuff as we're keeping our headquarters and studio for client videos there.

    • @shawncalderon4950
      @shawncalderon4950 ปีที่แล้ว

      I have traveled the world as an electronic field engineer and no one pronounced multimeter this way:0

  • @shawncalderon4950
    @shawncalderon4950 ปีที่แล้ว

    Molt-eye-meee-ter 😂

    • @CircuitBread
      @CircuitBread  ปีที่แล้ว +2

      I have realized I have no idea what the correct pronunciation of multimeter is. If anything, I just get more confused over time!

  • @riemanndiy6693
    @riemanndiy6693 3 ปีที่แล้ว

    Don't you use an oscilloscope?

    • @CircuitBread
      @CircuitBread  3 ปีที่แล้ว +3

      Yep - 2:15 is where I start talking about it.

  • @flyinglack
    @flyinglack 3 ปีที่แล้ว

    hello