I installed this on my 1999 24v. First off it is a great turbo. It's a direct bolt on. I have RV275 injectors with a SMARTY. ARP studs with O-Ringed head. ATS 3 piece manifold. This turbo sounds wicked and My EGT's cannot get higher than 900°f on my current setup. Going to put bigger injectors on this build now that I have the confidence with this turbo
@@parkercaldwell2616 No issues with the turbo. The engine was swapped for a DFC tow haul because I had a 53 block. That engine comes ARP studded, heavier vlaves, o-ringed, and stage 3 hamilton cam. The turbo paired very well. It's super efficient at all RPM levels of the 24v. Spooled faster, better top end, and more boost than my stock HX35. And sounds wicked
I’ll be ordering one of these here soon. I been looking around and this sounds exactly like what I need. I’m running 150 industrial injectors, fass lift pump, about to pick up a quadzilla adrenaline and this. Can not wait.
I owned 2 Dodge Cummins. A 2nd gen got it new put a big turbo on it until the engine blew up. Bought a 3rd gen and still have it to this day. If you do buy a older Cummins you would love it.
@@oldcroneysgarage9739 Yeah it was Amazing. I custom ordered it with a Cream interior and the 5 speed manual. It lasted 6 years Again till it blew. Pushing 650hp out of it. Loved it but love my 3rd gen more. Again Cream interior, Laramie and the 6 speed. I keep this one stock so far and gonna put a Exhaust on it soon. It does geart here in Cambodia
Nice products but it would be nice if you guys could put some high sound quality dyno pulls in these videos somewhere, not that sound has anything to do with performance... but who doesn’t like the sound these make?
97 rwd/ drw/ bone stock, I'll be calling these guys soon when it's time , and it's round corner. Wondering if this is fine with everything else stock or do you do this AFTER more fueling, just a workhorse small lawn enclosed, that may see a car trailer, mini excavator, or dump trailer .
Neither of those options comes close to having the power potential of the stealth. Neither are a direct drop in replacement. Neither are factory appearing. The s300 sacrifices Drive-ability compared to the Stealth.
![F.HERO Ft. JSPKK x ลำไย ไหทองคำ x M-PEE - ไม่สนิทบิดหมด (Thai Riders Anthem) [Official MV]](http://i.ytimg.com/vi/kPJZ0UihBfk/mqdefault.jpg)
@02:52 Just saw your little helper peek his head over your right shoulder 🤣
Turbo Tommy!
I installed this on my 1999 24v. First off it is a great turbo. It's a direct bolt on. I have RV275 injectors with a SMARTY. ARP studs with O-Ringed head. ATS 3 piece manifold. This turbo sounds wicked and My EGT's cannot get higher than 900°f on my current setup. Going to put bigger injectors on this build now that I have the confidence with this turbo
Thanks for the feedback! Sounds like you got a cool build going on.
Did you have any problems with the turbo and did you do anything to the engine?
@@parkercaldwell2616 No issues with the turbo. The engine was swapped for a DFC tow haul because I had a 53 block. That engine comes ARP studded, heavier vlaves, o-ringed, and stage 3 hamilton cam. The turbo paired very well. It's super efficient at all RPM levels of the 24v. Spooled faster, better top end, and more boost than my stock HX35. And sounds wicked
Your running out of breathe example just sprung a light on in my head and now it all makes sense. Thank you for that
I’ll be ordering one of these here soon. I been looking around and this sounds exactly like what I need. I’m running 150 industrial injectors, fass lift pump, about to pick up a quadzilla adrenaline and this. Can not wait.
Did you ever get the quadzilla or this turbo?
@@RebelBoy-is7hw I got the quadzilla but went a different route on turbo
@@RebelBoy-is7hw and I lied about my injectors they are 200 horse injectors
What turbo setup did you go with? And do you like it?
@@geebee9585 s363 and I never got to try it out, pulled the cab, set new cab on, re wired the cab and sold it lol
I don't own a dodge Cummins but I still like watching this kind of stuff. My dad's got a 2000 dodge ram 3500 I want to buy
I owned 2 Dodge Cummins. A 2nd gen got it new put a big turbo on it until the engine blew up. Bought a 3rd gen and still have it to this day. If you do buy a older Cummins you would love it.
@@a-dog8075 how was the 2nd gen when it was new? Did it have shiny clean headlights? Manual transmission? 😂
@@oldcroneysgarage9739 Yeah it was Amazing. I custom ordered it with a Cream interior and the 5 speed manual. It lasted 6 years Again till it blew. Pushing 650hp out of it. Loved it but love my 3rd gen more. Again Cream interior, Laramie and the 6 speed. I keep this one stock so far and gonna put a Exhaust on it soon. It does geart here in Cambodia
@@a-dog8075 dang cream interior lol. High class truck. 12 valve?
@@a-dog8075 if you didn't know. If you pay enough you can go buy a brand new 2000 dodge ram 3500. You'll have to custom order it though.
Liked and subscribed, 2000 24V. Mild tune, Air Dog Raptor, 4in exhaust, BHAF.
I want a Cummins!!!!!! One day I may
Nice products but it would be nice if you guys could put some high sound quality dyno pulls in these videos somewhere, not that sound has anything to do with performance... but who doesn’t like the sound these make?
Like the first 6 seconds of the video, but better?
97 rwd/ drw/ bone stock, I'll be calling these guys soon when it's time , and it's round corner. Wondering if this is fine with everything else stock or do you do this AFTER more fueling, just a workhorse small lawn enclosed, that may see a car trailer, mini excavator, or dump trailer .
I would atleast add 75hp injectors
Ima get one for sure hopefully by thanksgiving deals I’ll have enough cash 💰
Nice!
Can I use the bigger compresser and get stock power and psi for a 12v?
Whats the lb/min on this thing? The stock hx is like 58 lb/min i think.
What’s a good size injector to pair with 64 mm ? I bought a stealth in summer and love it!
Give us a call and one of our guys can walk you through your options. 815-568-7920.
How much is this turbo
Tried to find this on your site. Couldn't find it. Want to know what this would cost?
Our sale last month ran us out of inventory. Give us a call and one of the guys can get you more information about how to get one. 815-568-7920.
Will this not bolt in a first gen as well? I know I’ve seen multiple hx35 swaps.
It will also bolt to a first gen Teezley, we should have added that!
DAAAAAMNNNN !!! $$$$$$$$ 62/65/12 s300 for the win already... Or an Aurora 3000 ats for cheeper and make more power
Neither of those options comes close to having the power potential of the stealth.
Neither are a direct drop in replacement.
Neither are factory appearing.
The s300 sacrifices Drive-ability compared to the Stealth.
Price$$$????
Next up 7.3 Powerstroke turbo upgrade??
Keep following, you never know.
Duramaxtuner just let me know when to give the deposit!!! 👍
I bought one and my truck is stock will it push more boost or that same as my old stock turbo
We would expect to see higher than stock boost numbers at peak.
@@Duramaxtuner even with a factory tune ? Does the turbo have a restrictor in the boost elbow to the wastegate ?
Is this good for stock trucks
Yes, it can be run with a stock truck.
How loud is this turbo?
Jet turbo loud.
Vs a super B ?
Give us a call so we can detail why ours is a great option, 815-568-7920.
Would I need headstuds
It depends on how much fuel you want to run with it.
40% injectors?
First comment
What an honor.
Does this turbocharger help control global warming?
As much as the factory turbo does.
I find most upgrades give you better fuel milage = less fuel burnt and less inviro impact. Same with delet Ed trucks imo
God I wish I could is that dyno
How much cost??
$1550