Wouldn't it be more effective to turn your CPU cooler fans around and use the rear fan as an exhaust for all that hot CPU air? I'm just a noob, so IDK, just curious.
I'm curious, do you think the Corsair Shift power supplies would work in this case? I know that the fan would be drawing air directly from the case. This isn't a concern, I would be more curious if the mounting bracket would interfere with where the psu cables plug in.
Just rebuild my pc into the same case but im getting 3x 120mm slim fans for the bottom intake since my current fans are too close to my 4070s. just to be safe and move air a lot easier.
On amazon it states that I can use a 240mm AIO. If I wanted to use the AIO I'm better of getting an SFX or a short ATX PSU will fit? I already have an ATX PSU and don't feel like buying an SFX but if I have to for this case then I prob will. EDIT: I'm just gonna get the bigger version the Jonsbo D31, it can support a full size ATX and even a 360AIO but now I can buy a 280AIO and use my ATX PSU I already have. Great video!
Air intake from the bottom and rear. So the tower cooler fans have to be orientated accordingly. PSU sucks air from the front and exhaust to the top. Almost all exhaust are focused on top and some might leaked to the front. Really interesting
I love when cases use the space efficiently! great build!
That's a very clean build brother. 🍻
Clean as always!
Wouldn't it be more effective to turn your CPU cooler fans around and use the rear fan as an exhaust for all that hot CPU air? I'm just a noob, so IDK, just curious.
How is your CPU air cooler doing on temps just for games not stress tests?
Never mind just saw it in your description thank you.
I did install the 40% darkening foil for car windows. it gives good vibes.
Are those the cables that come with the power supply or custom ones?
@@fhantoxic8347 They are the stock cables that came with the power supply.
I'm curious, do you think the Corsair Shift power supplies would work in this case? I know that the fan would be drawing air directly from the case. This isn't a concern, I would be more curious if the mounting bracket would interfere with where the psu cables plug in.
The case is hot. There is no fan in the front and it does not draw air from the bottom.
He mounted 2 intake fans on the bottom
Just rebuild my pc into the same case but im getting 3x 120mm slim fans for the bottom intake since my current fans are too close to my 4070s. just to be safe and move air a lot easier.
Beautiful
Is it possible to install 140mm fans? Is there room for them?
Yes, I used 140mm fans on top and bottom.
On amazon it states that I can use a 240mm AIO. If I wanted to use the AIO I'm better of getting an SFX or a short ATX PSU will fit? I already have an ATX PSU and don't feel like buying an SFX but if I have to for this case then I prob will.
EDIT: I'm just gonna get the bigger version the Jonsbo D31, it can support a full size ATX and even a 360AIO but now I can buy a 280AIO and use my ATX PSU I already have. Great video!
Thank you! Good luck with the build.
The D41 support ATX but the D31 doesn't
Maybe I missed it, but where did the PSU cable that plugs into the wall go? Seems to just disappear behind the back panel
You can see it at 5:15
@@SubdubbinBut then you see you completely close it off at 8:57
The case includes a 90 degree angled PSU extension that is routed through the side panel
Look its a bird,no its plane ,no its a superman, nooo its a microwave jonsbo 🎉🎉🎉
look expensive how much was the build?
Positive pressure with exhaust on top? hmmm interesting.
Is his fan setup good or bad? It seems like a positive pressure setup, but after I tried it out, the temperature didn't seem to change.
Air intake from the bottom and rear. So the tower cooler fans have to be orientated accordingly. PSU sucks air from the front and exhaust to the top. Almost all exhaust are focused on top and some might leaked to the front. Really interesting
In this pc enough cpu-cooler plus back 120mm, try you will not loose of effectives!
just 1 fan in the back and that's it?! Are you sure it's effective?
@@romanovtrip Yes 120*25, 30 or 38 mm
I hate that it seems to be acceptable to dangle the PSU on just two screws in these smallish form factor cases.
At 10:30 there are 2 screws in the front that hold the PSU in as well
is this the best airflow for this case? 🤔
Did the case come with the screws for the mother board?
The case or motherboard manufacturer always provides extra screws/standoffs, don’t worry!
@@lordprohibit-3832 yes it did
Wrong airflow and no bottom dust filter. No good building method.