I'm watching this because I snapped the volume ribbon while changing a battery. The plastic scraper was wedged under the peeling battery and no clue there was a delicate ribbon lying right in its path.
I changed the battery on the 11 pro and tore the flex for buttons on the left side. I will order flex from AliExpress, but it is without wireless charging, is that a problem? and how hard is it to just replace the flex without the buttons because I'm not sure how to just put the old silent button on the new flex?
Ideally buy it with the wireless coil attached, it’s possible to de solder and resolder from phone flex to the other. But it’s way easier to just buy the flex that has everything already on it The mute switch is kind of a pain. I made a video specifically about how to transfer it
The flex cable i i ordered is not attached to the wireless pad. Is it possible i just separate the the volume flex cable and the wireless charging pad.
I repalced my battery on my iphone 11 pro and now the volume up does not work. Ribbon cable seem fine no tears. I heated the base and lifted the battery out working top to bottom. So how did this happed? No prying tools were anywhere near the ribbon.
the 11 pro and pro max have this stupid design where the wireless coil/volume flex connects to the charge port, immediately next to the battery connector. id start with making sure you didn't accidentally disconnect that flex, or to disconnect and reconnect it
Hey i dont know the Reparation worked well for me but i try to start my Phone now and its Not starting anymore i put all Flexes on and off and its still Not working any idea what this Could be?
It could be anything from board damage to damaged flex. I’d start with disconnecting everything that isn’t absolutely necessary. So basically plug in the charge port, screen and battery. Plug in to power to initiate powering on. If it’s still not turning on you might have damaged the board
Currently watching your video because someone who refurbishes phones for a living couldn’t take the time to purchase proper battery adhesive and placed a whole 1 inch by 1/4inch strip of some sort of tape adhesive right on top of that ribbon cable……… fast forward my son knocks friends phone out of his friends hand, battery dislodges “surprise surprise” and rips said cable in half and now I’m replacing a wireless charging cable and battery…..
Luckily Ive had much experience opening iPhones and I can do the work myself but man I was really really aggitated sitting all the surface area of this battery that the wrong adhesive could have been used on but the person chose to put the tiniest piece nice and neatly across the ribbon cable. It was only a matter of time…….
I tried this method @15:22 but I when I put the back plate back on and tighten at the end, the volume buttons do not protrude out. The mute switch works though. Any idea where I’m going wrong?
i mean that black circle part with the flex you removed, a part of that was removed when i changed my battery lol it was on the sticker of my old battery!! will it effect the battery of my phone? HELP
Hi, so i severed the volume flex cable and mobilesentrix only sells the flex cable and not the one thats connected to the wireless coil, will it still work? I just want my volume buttons to work, i dont mind about the wireless charging
I'm watching this because I snapped the volume ribbon while changing a battery. The plastic scraper was wedged under the peeling battery and no clue there was a delicate ribbon lying right in its path.
Something that helped me avoid using more force than necessary on batteries was 99% iso alcohol
It would also be nice if Apple didn’t put cables in places like that too
I changed the battery on the 11 pro and tore the flex for buttons on the left side. I will order flex from AliExpress, but it is without wireless charging, is that a problem? and how hard is it to just replace the flex without the buttons because I'm not sure how to just put the old silent button on the new flex?
Ideally buy it with the wireless coil attached, it’s possible to de solder and resolder from phone flex to the other. But it’s way easier to just buy the flex that has everything already on it
The mute switch is kind of a pain. I made a video specifically about how to transfer it
The flex cable i i ordered is not attached to the wireless pad. Is it possible i just separate the the volume flex cable and the wireless charging pad.
You need a soldering iron to do that
I repalced my battery on my iphone 11 pro and now the volume up does not work. Ribbon cable seem fine no tears. I heated the base and lifted the battery out working top to bottom. So how did this happed? No prying tools were anywhere near the ribbon.
the 11 pro and pro max have this stupid design where the wireless coil/volume flex connects to the charge port, immediately next to the battery connector. id start with making sure you didn't accidentally disconnect that flex, or to disconnect and reconnect it
Hey i dont know the Reparation worked well for me but i try to start my Phone now and its Not starting anymore i put all Flexes on and off and its still Not working any idea what this Could be?
It could be anything from board damage to damaged flex. I’d start with disconnecting everything that isn’t absolutely necessary. So basically plug in the charge port, screen and battery. Plug in to power to initiate powering on. If it’s still not turning on you might have damaged the board
Currently watching your video because someone who refurbishes phones for a living couldn’t take the time to purchase proper battery adhesive and placed a whole 1 inch by 1/4inch strip of some sort of tape adhesive right on top of that ribbon cable……… fast forward my son knocks friends phone out of his friends hand, battery dislodges “surprise surprise” and rips said cable in half and now I’m replacing a wireless charging cable and battery…..
Luckily Ive had much experience opening iPhones and I can do the work myself but man I was really really aggitated sitting all the surface area of this battery that the wrong adhesive could have been used on but the person chose to put the tiniest piece nice and neatly across the ribbon cable. It was only a matter of time…….
They probably applied it to the battery as opposed to the inside housing 🤦
Far too many shops opt for that, which is quite surprising considering how cheap battery adhesives are. .10-.20 per piece
Actually i got replaced the battery and my phone volume buttons are working good but now they stopped, so it seems like the mistake of repairing shop
That’s certainly possible. Was it immediately after. Or days after. That it stopped working
My 11 Pro (non max) have torn volume flex. Is it possible to just replace the volume flex or is it one with the wireless charging module?
www.etechparts.com/apple/iphone/iphone-11-pro-max?p=2
Etechparts.com Use coupon code ROW2024 for 5% off parts and tools
Its easiest if you just get the flex w/ coil as they are soldered together
@@repaironwheels if i were to replace the coil, would it affect the nfc/apple pay functionality?
@rubycon9158 not at all
Hey … freaking thank you
No problem!
I tried this method @15:22 but I when I put the back plate back on and tighten at the end, the volume buttons do not protrude out. The mute switch works though. Any idea where I’m going wrong?
Are you using an aftermarket housing
what's the use of that black circle thing behind the battery??
i mean that black circle part with the flex you removed, a part of that was removed when i changed my battery lol it was on the sticker of my old battery!! will it effect the battery of my phone? HELP
thats the wireless charging coil, you'll be fine. its a part of the head shield sticker
Nice! I’m going to do my 13 flex cable when it arrives
Fingers crossed, good luck
Hello, is it the same for 11 pro?
its pretty much the same repair, like 90+% similar steps, screw placement etc
Hi, so i severed the volume flex cable and mobilesentrix only sells the flex cable and not the one thats connected to the wireless coil, will it still work? I just want my volume buttons to work, i dont mind about the wireless charging
If you're in the US, I have one I'd be happy to sell you.
To answer your question tho. It doesn't need wireless charging to turn on and function
putting the screen adhesif doen't make it comlex to remove the screen for next repairs ??
Not at all
@@repaironwheels it’s easy to open again only if you know the correct way or otherwise you gonna rip off the screen💀🗿
Thanks
Here to serve
Hello ❤
Hi
for me without the hangers, the power button doesnt work
I don’t know what to say there. I’ve done literally thousands of those and I’ve never once replaced that hanger
@@repaironwheels I just realised i had a custom flash and i put it on the wrong way ;)
Whoops 😬
@@repaironwheels your vids are sick tho bro :D
Thank you