Video Recap: 0:00 - Introduction 1:00 - Types of Policy Servers (Single, Multiple and HA) Interactive Wizard for Single policy server Manual Configuration for all types 4:30 - by Interactive Wizard - Single policy server (Web+DB+Log) Step 1. Select configuration type Step 2. Select language Step 3. Set ID & PW on the admin console Step 4. Set time-zone Step 5. Set time-zone (city) Step 6. Set NTP (network time protocol) Step 7. Set management interface Step 8. Select either On or Off of 802.1Q trunk port Step 9. Set IP address Step 10. Set subnet mask Step 11. Set default gateway Step 12. Select either On or Off of DNS's IP Step 13. Select either Active or Inactive of the network sensor Step 14. Double-check all of settings Step 15. Change Database Server's password
8:40 - Case 1 by Manual Configuration - Single policy server (Web+DB+Log+Radius) Step 1. Set debug event Step 2. Set IP, gateway Step 3. Set DNS, default gateway Step 4. Set database server Step 5. Set log server Step 6. Set web, SOAP server Step 7. Set radius server Step 8. Set ID & PW on the admin console 13:00 - Case 2 by Manual Configuration - Single policy server (Web+DB+Log) Hope this helps anyone looking for a quick recap! Feel free to jump to the section you need 😊
Video Recap:
0:00 - Introduction
1:00 - Types of Policy Servers (Single, Multiple and HA)
Interactive Wizard for Single policy server
Manual Configuration for all types
4:30 - by Interactive Wizard - Single policy server (Web+DB+Log)
Step 1. Select configuration type
Step 2. Select language
Step 3. Set ID & PW on the admin console
Step 4. Set time-zone
Step 5. Set time-zone (city)
Step 6. Set NTP (network time protocol)
Step 7. Set management interface
Step 8. Select either On or Off of 802.1Q trunk port
Step 9. Set IP address
Step 10. Set subnet mask
Step 11. Set default gateway
Step 12. Select either On or Off of DNS's IP
Step 13. Select either Active or Inactive of the network sensor
Step 14. Double-check all of settings
Step 15. Change Database Server's password
8:40 - Case 1 by Manual Configuration - Single policy server (Web+DB+Log+Radius)
Step 1. Set debug event
Step 2. Set IP, gateway
Step 3. Set DNS, default gateway
Step 4. Set database server
Step 5. Set log server
Step 6. Set web, SOAP server
Step 7. Set radius server
Step 8. Set ID & PW on the admin console
13:00 - Case 2 by Manual Configuration - Single policy server (Web+DB+Log)
Hope this helps anyone looking for a quick recap! Feel free to jump to the section you need 😊