@@OXCFilms yea I live in Australia man I picked up a 95 hilux and went around a corner nearly rolled it hahaha so I'm wondering if this will stop that, I sent it into my mechanic he can't find anything wrong must be my driving aye
Thanks for the install video. Doesn't look too difficult. Sick truck! I have a 94' and want the same look. What are the specs of those Enkie wheels? Size, width, backspacing?
It all depends on how you want your suspension to feel. If you just want it for looks you can just loosen the torsion bars a bit and it will lower the truck. If you want it to ride good then the spindles is the way to go
@@OXCFilms will i have to transfer this over to my new drop spindle? Will be adding belltech drop spindles to my truck tomorrow thanks for getting back
Yes you need to transfer your old one to your new spindles. The first time we the installed spindles we left the adjust how it was on the old spindles but the lock to lock wasnt enough. So we had to go back and turn the stopper all the way in and it is way better.
I have a 94 Toy and lowered the front by loosing the torsion bar but dam the ride was a little ruff so I had to raise it a bit.. Did you feel that it made it a comfortable ride with the front lowered spindles you installed?
Even though this video is a year later hopefully they got an air compressor. Because after a while it starts to lack on your body due to the fact your in a awkward position trying to break off 🔩 bolts..
@@OXCFilms thx man got this truck from my local scrap yard for 600$ they we’re going to pull the engine an tranny an crush it. Me an dad did tons of body work an painted her right in the front yard. We saved HER!!!😂🤙
@@OXCFilms I really appreciate that man it was a labor and of love. Love my mini trucks. I actually watched your video as a tutorial when I lowered mine👍 thx for posting
Man, your videos are great. I wish I could show you a picture of my 90 pick up.
Thanks bro! Send it to us on instagram 🤙
Thanks for the install video. I found out you can flip the lower ball joint and it will lower it another inch.
Forsure! We have seen a lot mixed reviews about the flipped ball joints
Did you notice after doing this you didnt notice much roll feeling in the ute?
A bit less body roll
@@OXCFilms yea I live in Australia man I picked up a 95 hilux and went around a corner nearly rolled it hahaha so I'm wondering if this will stop that, I sent it into my mechanic he can't find anything wrong must be my driving aye
@grizzlytasbear9716 we added 25mm front and rear sway bars to our other truck and it made a huge difference
Thanks for the install video. Doesn't look too difficult. Sick truck! I have a 94' and want the same look. What are the specs of those Enkie wheels? Size, width, backspacing?
Thanks! The wheels are 14x7 and -10 offset with 1" adapters
@@OXCFilms good looking out!
Anytime 👍
Yes these wheels are 185/60r14
Do i gotta change spindles if i add lowering kit? Or was that just ur truck?
It all depends on how you want your suspension to feel. If you just want it for looks you can just loosen the torsion bars a bit and it will lower the truck. If you want it to ride good then the spindles is the way to go
Hit me up having a issue on the alignment need help
Hey whats up
You have link to order that lower kit?
www.ebay.com/itm/222887510169?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=pGOJUXemTy2&sssrc=2349624&ssuid=qNwNEn86Rhm&var=&widget_ver=artemis&media=COPY
wat r da specs for rims n tires dope truck man
The wheels were 14" enkeis 14x6. I forgot the tire size. But the truck also had a spacer on it. Thank you
@@OXCFilms thanks man dope truck 💯💯 use to have a 95 hilux back in guam miss it so much🇬🇺
Thank you! I can imagine. The plan as of now is not to sell this one
@@OXCFilms if you wer to sell dat how much would u sell it for jst curious
Sell the whole truck or wheels and tires?
Whats the stopper for ?? Is that from stock spindles ??
Yes the stopper is from the stock spindles. It is to adjust lock to lock
@@OXCFilms will i have to transfer this over to my new drop spindle? Will be adding belltech drop spindles to my truck tomorrow thanks for getting back
Yes you need to transfer your old one to your new spindles. The first time we the installed spindles we left the adjust how it was on the old spindles but the lock to lock wasnt enough. So we had to go back and turn the stopper all the way in and it is way better.
I have a 94 Toy and lowered the front by loosing the torsion bar but dam the ride was a little ruff so I had to raise it a bit.. Did you feel that it made it a comfortable ride with the front lowered spindles you installed?
Not sure because we never drove with just the torsion bar lowered. We have heard that there is a difference
That’s really cool what you did! I would like to contact you so can do it to my truck, I’m in the Los Angeles area
You can reach us on ig. Or email us @ oxcfilms@yahoo.com
Bro.... get me a raspado he's going by. I hear him
🤣 i got you
3:30 Elote!
💪😁
عمل جميل
Even though this video is a year later hopefully they got an air compressor. Because after a while it starts to lack on your body due to the fact your in a awkward position trying to break off 🔩 bolts..
We didnt get a air compressor but we did get a cordless impact. Best investment so far.
@OXCFilms Their you go kid. I'm telling know now I'm 40 I'm still young but get it old. Invest in cordless ratchet as well ...
Will do. Thanks for the advise 👍. Besides making the job easier its also a lot faster
3:30 elotesssssss..... lol
🤣
The clown horn in the background lol
😅
i found yo sticker on a KFC pay window on normadie bro 💀💀
😁👍
You kids need air compressor 😮
Check out my 1990 Toyota pickup
Bad ass brotha! 🤙
@@OXCFilms thx man got this truck from my local scrap yard for 600$ they we’re going to pull the engine an tranny an crush it. Me an dad did tons of body work an painted her right in the front yard. We saved HER!!!😂🤙
Its worth it cause it came out really nice! One more yota saved from the crusher is always a good thing 👍
@@OXCFilms I really appreciate that man it was a labor and of love. Love my mini trucks. I actually watched your video as a tutorial when I lowered mine👍 thx for posting
Thanks for the support! We really appreciate it 🤙