Replace Rail Slides the Easy Way [Track Window Method]

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ก.พ. 2021
  • Welcome back to the channel everyone!
    We are Officially are over 1400 Subscribers!
    THANK YOU TO EVERYONE FOR ALL OF THE SUPPORT!!!!
    In today's video I show you how to Replace Rail Slides the Easy way Way without having to remove anything else like the skid or even loosen your track....
    Check out the video and see how it's done with basic tools like:
    1. Philips & Standard Screw Drivers
    2. Hammer or rubber mallet
    3. 7/16" Wrench
    4. 3/8" Ratchet & Socket head bit OR Allen key Set
    5. Vise Grips
    6. Utility Knife or POVC Pipe Cutters
    7. Tape Measure
    If you're not Subscribed to the channel and like this sort of content:
    - Hit the SUBSCRIBE Button & ALERT BELL buttons for future Notifications
    - If you like this sort of content hit the LIKE Button
    -If you know anyone else that likes this sort of content or could get some use out of it, SHARE On social media and networking
    - Please chime in and share ideas on how I can improve my craft or to simply Say "HELLO"...
    Looking forward to providing as much useful content as I can for everyone so if there's anything that you'd like to see, let me know in the comments sections of any video!
    See you in the next one so Come on Back!
    Take Care and God Bless you and Yours!
    Sincerely,
    Andrew C.

ความคิดเห็น • 15

  • @user-nq8nf1fs2i
    @user-nq8nf1fs2i 3 ปีที่แล้ว

    Andrew. As always, great work and a useful video. My advice to you is not to suffer with the mounting blade knocking out the sliders. I use a hammer drill . I turn it on for chiseling without rotation and knock it out. I use an old useless drill . I sharpen it flat. Very fast and easy to go.

    • @Fixin2Ride-Official-
      @Fixin2Ride-Official-  3 ปีที่แล้ว

      Great idea. I dont have one like that in which it has option to turn off the drilling..

  • @larrywarner9314
    @larrywarner9314 3 ปีที่แล้ว

    I usually loosen the track up it makes it easier

    • @Fixin2Ride-Official-
      @Fixin2Ride-Official-  3 ปีที่แล้ว

      I should have had the sled lift higher. Lol. Made it a little awkward of an angle. Lol.

  • @jeffreyhagelin3672
    @jeffreyhagelin3672 9 หลายเดือนก่อน

    OK as long as you don't mind cutting the track.

    • @Fixin2Ride-Official-
      @Fixin2Ride-Official-  9 หลายเดือนก่อน

      Hasn't happened to me. If yiu have reverse.yiy can also do it that way. Just pop out the hyfax a little through a drive tooth window and the track will do the rest.
      Thanks for watching.

    • @jeffreyhagelin3672
      @jeffreyhagelin3672 9 หลายเดือนก่อน

      @@Fixin2Ride-Official- That was my point, the track windows aren't always wide enough to allow the slides to pass.
      Consequently a person has two options, either widen the windows or pop off the skid.
      In all my years I have yet to see track windows wide enough to permit slides to pass through..

    • @Fixin2Ride-Official-
      @Fixin2Ride-Official-  9 หลายเดือนก่อน

      @jeffreyhagelin3672 gotcha! Thank. You!

    • @jeffreyhagelin3672
      @jeffreyhagelin3672 9 หลายเดือนก่อน +1

      @@Fixin2Ride-Official- .. unless you're willing to cut..

    • @jeffreyhagelin3672
      @jeffreyhagelin3672 9 หลายเดือนก่อน

      @@Fixin2Ride-Official- I would not advise you to stick the slide through and then put it in reverse unless you want to ruin a $1000 track..😀😀😀

  • @jmudd5449
    @jmudd5449 3 ปีที่แล้ว

    Should have got orange high faxes

    • @Fixin2Ride-Official-
      @Fixin2Ride-Official-  3 ปีที่แล้ว +1

      It was all I had in hand. But I did a lot of the skid parts in orange. Didnt want to over do it! Lol
      Thanks for watching.

    • @jmudd5449
      @jmudd5449 3 ปีที่แล้ว

      @@Fixin2Ride-Official- looks great.

    • @Fixin2Ride-Official-
      @Fixin2Ride-Official-  3 ปีที่แล้ว

      @@jmudd5449 Thanks buddy! Hows that 8 hundo running?