DIY Shed Doors & Windows - Cheap & Easy!
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Building doors and windows for a DIY shed is easier than you might think!
Get Plans to build your own DIY 10x12 Shed! fixthisbuildth...
Sponsored by WD-40 Brand. Pick up the new WD-40 Precision Pen at Lowe’s here: low.es/44KzRva
🎥 What to Watch Next:
DIY Shed Build Series:
1. Building a Shed Foundation - • I Overbuilt This Shed ...
2. Framing a Shed Alone - • Framing an Overbuilt Shed
3. Roofing a Lean-To Shed - • Roofing My Overbuilt Shed
4. DIY Shed Doors & Windows - • DIY Shed Doors & Windo...
5. Finishing My Overbuilt Shed - • Finishing My Overbuilt...
➤Join the FTBT Builders Club!!! bit.ly/2abkaSV
More content, early access, FREE plans, video credits
➤Tools/Supplies Used (Amazon affiliate):
Our Amazon Shop - amazon.com/sho...
WD40 Precision Pen - low.es/44KzRva
Kreg Track Horse Stand - amzn.to/3TqiHiX
Kreg Track Saw - geni.us/aASS
Kreg VersaGrip Clamps - amzn.to/46I53uc
ISOtunes Bluetooth Hearing Protection - bit.ly/2Ru4Es8 (10% off code: FTBT)
ToughBuilt Tool Belt - amzn.to/3N9PEMz
ToughBuilt Project Pouch - amzn.to/3RsSsqF
Gorilla Cart - amzn.to/3FOo6Ip
Cordless Sliding Miter Saw - amzn.to/3N5XE0L
M18 Cordless Brad Nailer - amzn.to/44PzOOP
➤Support the FTBT Channel:
Buy FTBT Woodworking Plans: fixthisbuildth...
Buy FTBT Merch: bit.ly/2YgiHnd
Links to My Tools & Gear: bit.ly/FTBT-tools
Subscribe: bit.ly/FTBT-you...
➤Thank you to these partners for supporting our channel. Go check them out!
Kreg Tool: amzn.to/2FXZIGp
ISOtunes: bit.ly/2Ru4Es8 (10% off code: FTBT)
➤FOLLOW FTBT on Social Media:
Instagram - / fixthisbuildthat
Facebook - www. fixt...
Twitter - / fixthisbuildtht
Pinterest - / fixthisbuildtht
➤Referenced people/videos:
Shop Nation Shed - • The Start of an Epic P...
DIY Pete Shed - • The EASY Way to Build ...
Music Licensed through Epidemic Sound - Get a FREE month: bit.ly/3qCwWiW
Get Plans to build your own DIY 10x12 Shed! shop.fixthisbuildthat.com/collections/outdoor-projects/products/modern-10x12-diy-shed-plans
If you want to see the rest of the build you can find the videos here:
1. Building a Shed Foundation - th-cam.com/video/XodcMhvfkXg/w-d-xo.html
2. Framing a Shed Alone - th-cam.com/video/cGqx95JVsws/w-d-xo.html
3. Roofing a Lean-To Shed - th-cam.com/video/Hv3EOTkR3xw/w-d-xo.html
4. DIY Shed Doors & Windows - th-cam.com/video/rp3rJUWJeKE/w-d-xo.html
5. Finishing My Overbuilt Shed - th-cam.com/video/uPO46hSpP0A/w-d-xo.html
Can we just appreciate how much care goes into editing to the music.
Chris (our editor) is a magician
Nail gunning on beat of music = instant like. Don’t even care what the video is about. 😂
the ghost deer was a *chef kiss*
👍🏻👍🏻👍🏻👍🏻
Totally! Keeping it funky!
Love the ghost deer hidden in the video.
I love it too they started occurring earlier in his videos after he talked about the butchering room.
I saw one get struck by lightning. I missed the other ones
I love the way you do your sponsor plug-ins along with your video. It isn't as much of a disruption, yet it still is "right there." Excellent job.
the thing to do is first cut the house wrap just like you did but then fold it into the widow opening and staple it down. Don't cut it flush, it provides another barrier to moisture. Then go over with the black tape starting at the bottom (sill) and then work your way up. I would have also suggested not using silicone on the bottom of the window on the inside. If water gets past the silicone you put on the outside (bottom) you want it to drip out, not collect in that gap between the two silicones. Probably not going to be that big a deal anyway because you have a pretty big overhang. But wind may blow water at those windows. Looking good either way. Nice shed.
Where would the water drip out of if he didn’t use silicone on the inside? Didn’t you see how there are wood pieces supporting the acrylic which was installed from the inside?
Agreed. I have wrapped windows before and this is correct. I would lay it on the sill of the frame first and work it into the corners then wrap it on the outsides.
no, just cut it flush with a sharp knife. (unless you are not going to use zip tape). always tape the sill first and run 6 inches up the side. * it is ok to cut the tape at the corners. then tape the sides, and the top. then u can cut 4 butterflies to seal the 4 corners. and moat importantly, *** roll the tapes to activate the acrylic adhesive.
Ok, the fact that you matched the tempo of the nail gun to music is rad AF. Used your video for making the gravel pad, stayed for the rest of the build.
I ce here to say the same... Rad.
LOVE the corner miters - more esthetically pleasing. And with your assembly method, I think even I could do that.....
I like to leave 1/8" of the square corner with miter. Gives kinda a shadow line.
Appreciate the excitement you get when something works. It's very relatable.
lightening striking the ghost deer, classic!
You want the house wrap on top of the windows to lap over the flashing tape.
It's not that big of a problem as your windows are close enough to the soffit, but any water that might get up there could run between the wrap and tape and get inside.
Just a tip for next time.
Does that really matter? Cause with the zip sheeting system I've seen them also just put the tape like this. So that would give the same "problem" no? (Purely from YT, we don't have zip where I'm from)
@@urbanlucky98 Water doesn't get behind the zip sheathing. He used regular house wrap here, which if it were not so close to the roofline could get water or moisture/condensation behind it. The tape he used forces that water to go into the wood/wrap/tape area rather than drain down or over a flashing.
@@danlake7970 ah gotya thanks!
This is correct. I was taught this method.
Great job!!! I made my shed base following your vids- bought the shed tho. Oh btw, the term you're looking for is "stop". Mullion is a vertical piece between windows, muntins are the bars that make up a decorative grid in a window, mullet is a type of hair style and mutton is sheep meat. Window terminology can get pretty tricky.
I usually use screen material around the base and inside the soffits. Not only keeps mice or rabbits out but also keeps bees/wasps from building nests under sheds or getting inside. But I’m in the northeast so things may be different.
I thought the exact same thing, MD for reference, and using this on a shed I helped my father build 40 years ago.
But then I had another thought. If he used a home building technique called monopoly framing I believe, where the exterior wall sheeting runs to the full height of the rafters. So where you usually square off your OSB/sheeting at the top plate you continue those to your ends and your peak. Then you add the overhangs as a boxed extension and attach it to your sheeting. roofing sheeting would extend to just the far edge of the sheeting from the walls. Creating an overlap; like a flashing. Then use building wrap or vapor barriers etc.
This not only keeps out the bugs and other unwanted guests, it better insulates the inside of the shed. In a place where it gets as humid as Tennesse, this will reduce humidity build up in the shed which we all know is better for your metal tools.
Man I _love_ it when a DIY creator I follow posts a perfectly timed video
Caulk and Paint, making a carpenter..... like a saint?
lol, I like that one better
Here in new Zealand we use packers in the corners of the windows and door to prevent any stree on the taped seem. The doors and should also have a header and sil flashing along with the jamb flashings. Even with a shed this is standard practice
I came through Tennessee the end of may and heard and seen all the cicadas… I was happy as a kid in a candy store.. they make my favorite sound it reminds me of a time in life when I didn’t have the worries of an adult… summer nights as a child sleeping with the windows open and my dad was still here with us.. I understand how it cld be a problem for some of you especially with the double brood…
Dry nice project series. Thank you for taking the time to document your efforts, “misteaks” included. Turned out great!
That laugh right after the doors close is a good sign you are really happy about it 😁Nice work!
This is the best detailed shed video I've seen. Nice job!
I really like how you mitred the trim-molding thereby making it look more finished! I like the super clear, plexiglass windows and trim-moulding on the inside of the shed! The doors turned out great, and I especially like the spring loaded pin holder on the inside of the left door. I cannot wait to see the next episode with more of the finishing details.
Well done!
I appreciate the time you took editing the you-nails to the beat of the music. 👏
The top and bottom of the windows are most critical for sealing, so cut the house wrap so you can fold it back to the inside at the top and bottom. You can cut small pieces of wrap for the sides and then use flashing tape starting at the bottom and go upward. Window sill pan flashing is also a good idea. You can buy adjustable PVC pan flashing that can be cut and glued to fit.
Looking sweet! You haven’t fallen off a ladder yet, so, eagerly waiting on that
Gotta save up for the finale
Cicadas. They’re all over my house and trees here in Suburban Chicago. Great job on that shed. Looking good.
Just watched snippets of this, but I have learned from experience to add a ramp to any kind of shed or shop from the get go... unless you just want it to be pretty, that is.
I gave this a like strictly for the quote from Norm Abram! ❤Norm!
The reference to Norm reminded me of Saturday mornings watching his show!
Great video, Brad! Haven't seen one of your videos in a while but I'm really impressed with how much the editing and production has improved since the last time I watched. You're crushing it! Keep having fun!
I love how the tacking goes to the music. Great video.
I found it easier to reach underneath the over hanging shingle at the end of the each row n hook the hook razor blade in your razor knife onto the bottom of the shingle n slide it up the drip edge. nice clean line eveytime.
Great stuff. The windows really add another dimension to the shed.
I love the Mr Fancy Pants dust collecting Kreg Jig.
Thanks for sharing. I would definitely build a ramp for mowers and carts and tractors. I would recommend using a push stick on that table saw!!!
2:25 the nailing music video timed to the beat was a nice touch.
Excellent work on those doors and windows Brad! 👍👍🔨🔨
thanks, Steve!
Great video Brad it’s looking amazing can’t wait to see it finished.
Seeing your shop always inspires me to go clean up mine. So here I am at 430 am about to go clean my shop up some before gym and work. Thanks for that Brad. 😂
sounds like a good morning!
I love how you show your screw ups. It shows you are human and not perfect. Thank you.
I used chicken wire to cover the gaps on the bottom below the stones then board on top, just a thought. 😊
good idea!
Your window flashing is great. Before you add your siding, make sure you cover that gap between the soffit and house wrap. Otherwise the water will drain right into the osb.
0:55 the ghost deer hahahaha.... and the sync of the nail gun is truly appreciated. and the dead one :) Cheers from Buenos Aires
2:24 i appreciate the editor, whether its you or you have someone else lol. The pops all lined up with the music haha, love it
Something I've noticed since moving to Middle Tennessee... it rains. A lot. Like, almost every day for a month! And yes, the cicadas are oppressive. My mom was insisting there was something wrong with my car and it was making noise, when we stepped out of the car in a parking lot, she said "OMG, you're right, it's the cicadas!"
This has been so much fun to watch! I can’t wait for the shop builds too… hint hint lol this looks amazing and well built
Putty and paint makes the devil a saint!!
Man, what a fantastic work! Really well done, Brad!!! 😃
Stay safe there with your family! 🖖😊
thanks, MC! It's definitely coming along
I’ll be excited to see the ending. Could you possibly to a full price breakdown on it?
Lexel or Through the roof is my sealant of choice for windows like that. Also Big Stretch caulk for all the other caulking needs throughout this project. The are sold at Lowe's and other ACE type hardware stores as well.
Mountain Dew should sponsor you
Hogs don't sweat.
Pigs don't sweat because they have few functional sweat glands. To keep cool, pigs use other methods such as: Panting, Peripheral vasodilation, Wallowing, Sleeping in mud, and Swimming in water.
Nice work! Looking good....
well i have a bone to pick with whoever came up with that saying then, lol
@@Fixthisbuildthat The expression dates to the days of industrial steel production and refers to pig iron, which was shaped in molds that had the pieces branching off to look like piglets suckling on a sow. Once produced, pig iron was not cool enough to move without burning anything it touched until it reached a point at which water vapor condensed on its surface, producing “sweat.” Hence, “sweating like a pig.” As for the barnyard animal, it doesn’t sweat much-not when there’s some nice mud to keep it cool.
So if you said ... "sweating like a pig" you would have been technically correct.
From the craftsmanship of Norm Abram. 😀
Knockin it out of the park!
Mullet strips rock!!
You should paint both sides of the soffit.
That prevents moisture from the "top" side migrating through the board and causing the painted side to bubble or alligator.
The shed is looking great Brad!
thanks!
Las bisagras van por dentro creo que quedaría más seguro de robos!!!!exelente trabajo!!nn🇨🇱🚀
Absolutely love the video, thanks for including your mistakes instead of whitewashing the content, learning how to handle mistakes on the go is so important and its nice to learn from your mistakes as well! Is that plywood floor not pressure treated or are you putting aluminum sheeting against pressure treated? i thought the deck ply ought to be treated and aluminum gets destroyed by those chemicals. Looks like its not treated though.
Thats a really nice shed. I think overkill gor a shed though
I've made my own double layer plexiglass windows with buytl around the edges and silicon disicant packets
The lock works, but anyone with a screwdriver can undo the hinges and they're in. I'm doing a similar project and am using heavy duty door hinges and mortising each inside the frame and the door so both sides are hidden from the outside.
Skewer 10 of those cicadas and toast them over an open fire for 5 minutes. Crunchy! 🙂
Looking good, Brad. You really had to overcome your ECD to build this. I did, however, feel bad for that ghost deer that was hit by lightning.
Bill
yeah, Bill. Building larger scale definitely puts things into perspective on trying to get within a gnat's hair
That was brave leaving OSB exposed to rain. That trash swells and never returns once it does. We're in the process of siding our house and we had so much damage to the little bit of OSB sheathing they used that I'm surprised the house didn't collapse during strong winds. We're using plywood sheathing instead of the OSB and foam board that was originally used when the house was built.
well that's definitely why I went with the house wrap! Cause I knew it'd be a while before the siding went up. But that stuff on the doors is just trash scrap, so don't care if it got wet
Ahhh a Ghost Deer appearance at 0:53
can't get rid of em
It was a few seasons in, but Norm also mentions hearing protection, as well!
Looks really good!
thanks!
14:21 So it IS possible to kill ghost deer!!! 😄
Awesome video, Brad, love all the 'easter eggs' - they just crack me up! LOL for real 😄😄
Muy buen trabajo , y la traduccion exselente de ingles a español saludos
lighting strike on the ghost deer lmao!
Es la primera vez que me salta el idioma en español, y es usted mismo el que habla, habla usted un español perfecto
gracias amigo. Estamos comenzando a poner español en todos nuestros videos y también lo hemos agregado a videos anteriores.
Great job! Thanks for sharing’
Hogs don't sweat 😂
How about soffit vents to vent out any fumes or smells you may have in your shed … also on your corner pieces you could have cut one narrower the thickness of the wood to make both pieces appear to be the same size
will be putting vents in the side walls which will let air flow better than trying to force hot air down out of a soffit. And yeah, could have ripped it short, but texture wouldn't match
@@Fixthisbuildthat
Understandable and gable vents will work just fine
Is it being a perfectionist or just doing it right anyway it looks great thanks Brad I always enjoy your content
Good video, but I would have still flashed the door opening (wrap w/ a flashing membrane) because water vapor/water will rot the jambs and header.
Question--Why no soffitt vents? Air circulation is imperative to prevent mold, of course I am not a builder...just a builder's helper
You took extra care about sealing the windows with silicone and tape but at the same time removed the house wrap around the door jam!
You need to install soffit vent in your soffits so the structure breaths.
Will the wood door be sagging over time? I am about to build one and consider using the house entry door, but rather a wood door instead. Thanks so much for the video.
When are you going to be getting a sponsorship from Mountain Dew, Brad?
Am I the only one who thinks he did the handle backwards? I like it aligning with the lock so when it's vertical, its unlocked (the locking mechanism is vertical) and when it's horizontal, it's locked (locking mechanism is horizontal, covering the other door)
For the acrylic windows - what were your measurements when framing out the windows?
So nice 😊
It is an old and worn out joke, but I still giggle every time you say "Me nails"!!!
Ah... I didn't understand the joke... maybe it's an American joke?.. I'm from the UK... Can you please elaborate/explain to me the joke please? 🙏 Is it something to do with like our finger nails? 🤔🤔🤔
@andytee1471 not an American joke. His name is...Brad. he is using, wait for it, Brad nails, i.e. "me" nails.
Wow, how much thought and research went into choosing grey?
It's:
Measure with a micrometer
Mark with chalk
Cut with an axe.
😀
Dude, with the saw, turn it around 180 degrees and let the sawdust blow off the end of the table into the grass! 😀
🤨
I take it security is not an issue, here, as you're putting all the hinges on the outside, rather than the inside, meaning it is trivial for anyone to get into the shed, they just have to take off the exterior screws? Also, are the screws "outdoor" screws?
Hey Brad. Are you going to be giving us an update on your move? New Shop?
@26:25 welcome back, Mr Kotter
Great Video!! However I could argue that WD-40 is not a lubricant.
When do you use "rat boards," and are they made from a specific material?
If you caulk under the sill of window fully, there is nowhere for any potentially trapped water to escape.
Let me know if you need any more siding for a project. LP smartside expert finish could’ve pre made corners for you haha.
Probably missed this in a previous episode, but how wide is the total door opening? 5’? 6’?
Building a 9’x14’ shed with the door on the shorter side. Trying to decide on that sizing and get a metal roll up door ordered..
slightly less at 5' 4", 64" seemed like enough space for even a 60" mower
No ghost deer were harmed in the making of this video 😉
What are the measurements of the acrilic glass, thickness?
What is that style door handle called? That looks ideal, hopefully can get them here in the UK as not seen any like that from my half initial looks for ideas.
Any concern around the heat/cooling loss on the acrylic windows? I was looking at double pane windows and they're pretty expensive. Hard to get picture windows that size that are affordable.
Urgh.. Mountain Dew? I’ll take the crab juice!
What did you use for the accented trim?
I thought I was seeing things but nope that’s a ghost deer lol 😂
Hello. What is the extension bit you use on your drill?
Caulk and Paint, making a carpenter..... faint?