ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2021
- Had a lot of people asking how to mount the hard body on the ugly af chassis so here is how I did mine!
Mofo RC website here
moforc.com/
Mofo Ugly AF chassis here
moforc.com/store-home/ols/pro...
Mofo RC install vid here
• instructional build vi...
SOME OF MY FAV UPGRADES FOUND BELOW!
Small 2s battery I’m running here
amzn.to/37ouPr8
Work mat I’m using (and LOVE) found here
amzn.to/3ACRBsU
Treal aluminum high clearance links found here
amzn.to/3jZd1KO
Hot Racing high clearance links (Deadbolt) found here
www.ebay.com/itm/Hot-Racing-A...
Emax digital steering servo found here
bit.ly/3wdd7lp
Emax analog servo found here
bit.ly/3uVK6Jy
Rc4wd 1.2 tires found here
bit.ly/3qQJmFd
Hot Racing aluminum steering links found here
bit.ly/3pKyMiy
Treal brass diff cover found here
amzn.to/2UrPZBx
Treal brass steering knuckles found here
amzn.to/2TXpaVI
Treal brass extended wheel hubs found here
amzn.to/3zXLS0A
Treal overdrive gears found here
amzn.to/3xS5Doq
Treal high clearance links found here
amzn.to/3vVo61O
Treal wheels found here
amzn.to/2T3hdOw
Hot racing aluminum steering links here
bit.ly/3pKyMiy
Rc4wd Patagonia tires found here
amzn.to/3qpGizu
Don’t forget to use the discount code 2fmrc at fullsendrc.com for 15% off your order!
Don’t forget the amainhobbies affiliate links! If you need anything let me know and I’ll get ya a link! You can get to amazon through the link below and help out the channel as well. Thanks so much for the support and as always, hit me up if you have any questions or anything!
amzn.to/3x1HRX2
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - บันเทิง
I like that it's quieter and you don't have to hack up the inside of your rc and you have to drive it a little bit more. With the tegue as soon as you start to climb the brushed is really pretty darn smooth the only difference is you have to pay attention to the skinny trigger a little bit more. Barrage motors are cheap lol and easy to install 😂🤣
Love all your videos. You speak well. Very fluent.
I think your truck is just simply beautiful and just an overall good design. Hope everyone has a great day and a great crawl
Very cool rig!!!! Awe YEA Betty is here!!! I'm going to try and take her for a spin when it cools down this evening!!!!🤘🤘🤘🤘
Yessssss!!! Let me know how you like it!
@@2fmrc I will bro!!!
We could hear you loud and clear, cool rig. As always appreciate you sharing.
Thanks!
Hey Matt, Loving the channel and the quality information that you have been putting out about these awesome little micro crawlers. I think it would be awesome for you to put together a video that outlines a 200-250$ build for a beginner. Knowing what you know now, what would be the first money spent? C10/Jeep or Deadbolt base? Servo and motor upgrade? Wheels and tires first? I think it would be great to see you put together something outlining the initial jump into this hobby! Thanks!
That’s a great idea and I’ve kinda meant to do something like that for awhile now. I may have to get on that project soon! Thanks so much for the compliment and for watching!
You've done an awesome job my friend. Keep up the great work.
Would love to see a complete build overview idea of this truck!!
As always great information 👍
cool upgraded video! You did a wonderful job. The information in this video will help many people. And thank you for the detailed explanation. Amazing 2FM RC! You're a cool friend.👍😍😎👍😎💯
Thanks so much! Really appreciate that!
Very helpful video, thanks for upload
Thanks! Glad it may help out a bit
Wow super cool race track
id love to do a half cap body on my mofo ugly chassis, i feel bad to cover up the whole chassis with a body its so nice, i appreciate you for putting me on the the mofo ugly because i love it so much, its almsot as capable as my losi mini crawler now.
I like it looks awesome
Awesome rig! Love the chassis, wonder if I could make the same thing out of carbon fibre, you said something about 4-link in the front, can you make a video showing how you make it a 4-link?
Great video. Funny that you steered away from outrunner motor cuz I just put one in my tetra k1. Works pretty well just have to work on programming the Lizard to get rid of the chattering. Again great video, love your stuff👍😎
Yeah I just decided to do something a little different for this one. Still can’t beat the smoothness of the outrunner and Furitek!
Could fill and work in those holes in corners and do a spot primer job…. Could flow with theme of rest of body. Just an observation. Makes me wanna build up and mount my Yota body on mine even more now, awesome build,,
I did think about doing that! Maybe even primer the hood so it’s not the only primed spot or something. Good idea for sure!
Please make a video for the noble 4. All the videos on TH-cam suck. I love the noble but I’m fairly new to rc and need your help. Because I like the you explain stuff.
Same thing happened to my set of injora wheels first install wasn't even tight and just snapped drives me crazy seeing it so ill just keep running my treal wheels.
Yeah that stinks! I hated it but then decided to just go with it on this beater truck lol
Badass looking red you ask me
The one from gamyrc that has three mounting holes does it help keep the gear's messed . I thought I got good motor mounts not boo
Put some tail lights in those spots would look cool
Where could i get the body at
Hey matt by chance did you ever try to mount the furitek motor in that chassis? Just curious if it would fit
I didn’t but I’ve seen several do it. It’ll fit. Just may have to move some things around a bit.
I'm possibly getting another panda hobby tetra, but this one is a 6x6. anything I should know before I obtain the panda hobby tetra X1 6x6? Because if you have tips I would love some, also the panda hobby tetra X1 is my favorite truck so I hope the 6x6 version proves no different. I'm also going to put the atlas front bumper on this 6x6 because I've officially had the atlas and it's good apart from the stock motor. Please respond
I am very grateful I found your channel. I’m new to RC’s and and I have had many questions. Literally every question I had you have a video of. From the tires, wheels, and weights to the motor’s and ESC’s. Then I needed info on chassis and LCG set ups. Every hop up I have been interested in you use . My friend you sir have saved me a lot of time any cash. I now have ordered so much stuff and have so many ideas I will be busy for about a year. Cheers buddy!👍🍻
P.S. I personally want to set up a my MOFO similar to yours as far as mounting Electronics,and motors. A video of this Set up with an Outrunner and Stock style Installation tutorial would be something that would probably garner a lot of interest.
Awesome! So glad to hear the channel has been helpful!! That’s the main reason I started it honestly. Let me know if ya ever need anything.
I'm willing to bet they called it a Tegu is because its a lizard that climbs well. I have one as a pet
Where did you get that body?
Wow superbe ton camion ,le look baroudeur, j adore , sinon j aimerais mettre ce chassis sur le scx24 chevy , y a t il des pieces a rajouter ? Merci big up pour ta video
Matt, a few questions. I am looking into the GT4 Noble and I was wondering if there was a way to assign one of knobs/switches/whatever to cycle through the steering modes (Front/Rear/4ws/crab walk) without doing the long process of using the screen? Second question, why aren't you putting a flatbed on this truck? Will it not fit? (I was considering it on mine. I have a new scx24 sitting here and the mofo ugly chassis waiting to be installed. I just keep delaying it since I keep thinking up stuff that I should install while I have it apart and have to get the stuff ordered. But...I do have to admit that your truck look awesome with just the chassis rails back there.
I just kinda decided I was gonna leave the back free on this one. Since it’s a hard body anyway I thought it would help keep the weight up high as low as possible. May do it eventually just to see the looks lol. Honestly the one thing I’m not a fan of on the Noble nb4 is 4ws. I haven’t played with it much but no matter what I tried I just haven’t liked it very well yet. I am pretty sure you could set a switch to cycle the steering modes though. The customization is almost endless on it. I’ll have to play with that a bit and see what I can find out. Sorry I’m not much help with that one.
🤘🤘
Is the body the AMT 1/20 scale?
put smoke stacks over the cab holes . .
So i have driven the furitek with the brushless and brushed i think 🤔 i like the brushed better
It runs really well on the brushed motors but nowhere near as smooth on the slowwwwww crawl as the outrunners. I’m good with brushed though.
Yota looks awesome! Similar stance to my power wagon.
I'm not finding much info on updating furitek. Some say it fixes "cogging". Others say stops working. The app doesn't stay linked and remember changes, so I'm hesitant to mess with it since my settings are otherwise good. Maybe it's my older android. Any advice?
Furitek is not that great with announcing updates etc, check their FB official page and group, they are pretty active there.
They just release a new update yesterday, meant to fix cogging with brushless. I agree with you, their App and updates are not super reliable, I'm a bit iffy about it too.. If your setup works, don't mess with it, is what I say..
BTW, love your wagon build, pls do more vids of it!
Update: Just tried updating my lizard with brushless setup, didn't go that smoothly, took about 20 tries before it worked. New firmware does seem smoother. I was on V.1.8 which did stutter a bit, but wasn't horrible during driving. So if nothing is wrong with it, don't update it.. LOL!
@@michaelliao8773 Awesome! I look into that. I've got a few more new parts coming for my wagon and I'll make another vid then. Thanks
That’s a sweet rig man been thinking of building myself one was wondering what u think of the chassis how it performs compared to a stock one just kind of wondering what u think
Imo it’s quite a bit better. I love the layout for the electronics. Sits everything a little lower.
Thanks man think I am going to have to build one
Hi,
Is the RX the small or big version?
Also do you know if the 8ch FGr8B would fit the SCX24?
Thanks
I’m running the small version but the larger shouldn’t have much trouble fitting. May just have to mount it a bit different idk. I just prefer the small ones for these because of no antenna.
Would a furitek brushless be able to fit in this chassis?
Yes it should. The new micro Komodo (stinger) will definitely fit well.
What body is that
Great build and video as always, love it! Please do of vid on the Flysky Noble with your thoughts if you can.. cheers!
so I know this comment is coming in way late but what model kit did you use? I've been trying to find a kit to scale and I'm having one hell of a time. hopefully you get this and are able to help me out I don't have the ugly chassis but I have there buggy style. thanks in advance!!
This is a 1/20 Amt Toyota model kit. They have been discontinued so very hard to find now.
So a 1\20 scale will work that's awesome news I've been buying 1\24 and 1\25th thank you!
@@k1ngsbl3nd95 yeah the 1/20 models fit better. The wheelbase actually lines up most the time.
loving, loving, loving this build. you are making it hard for me to resist putting one together. good stuff bro. i also had a screw snap on the wheels. i just epoxied the head on since they just for show. 🤘🚙
had another though: be cool to find an engine sticker for the servo maybe. pop that hood 🤪
Yeah I thought about that. Or if I can make myself take the time to paint the motor that comes in the model kit and fit it to the servo that would be cool!
That would look sweet!
Can I get a vid of your most capable rc crawler?
Hard to say which one it is really but the HardPark Dementor seems to be the one I grab the most when wanting to pull some crazy lines.
I know this is a 2 year old video. But im new to crawlers and starting an lcg scx24 build for a class 2 comp truck. Do you still like the mofo ugly ad chassis? Or recommendations for something newer? Thanks and keep uo the great content!
@@roblootens2994 I would look into the NW Chassis works Athos or prophet designs echo chassis. I have the Athos and it’s a beast. Looking at building the echo soon I’d say. The ugly af chassis is still a great chassis. It’s an easy swap where the others I mentioned will probably be a bit more involved. The Mazz cheat code is also another pretty simple swap that I’d recommend checking out. Great chassis as well.
@2fmrc thanks so much!
I CAD design my own custom LCG chassis rails and 3D print. Resin and extruder printers. Fairly specific to model. Some rails are general. In the process of local company cutting carbon fiber rails. Could I donate a chassis to you.
Love you man......I appreciate your insight and content......Question, sorry if you have already answered this before, is that the original chassis for that rig? It looks carbon fiber-ish.
Thanks so much! It’s the ugly af chassis from mofo Rc
Who makes a good surpass motor mount?
There’s some good ones on eBay. That guy is on Facebook and they seem to work well. Mine was from gamyrc on shapeways. His stuff always works well.
Thanks can't seem to get the one i have to stay tight and loose my mess. Hope you and the family are staying COVID-19 free
@@mikemangiameli561 so far thankfully we’ve laid low and no one in the immediate family has had it. We home school and my wife works from home so we stay isolated a good bit anyway lol. Hope you and yours are doing well also! Let me know if ya need anything else. Here’s one of the eBay mounts.
www.ebay.com/itm/Scx24-surpass-outrunner-motor-mount-Game-changer-/254888678370?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
So far so good we really don't go anywhere but here and when we do we don't lick every thing 😂😂😂😂 we do have four confirmed cases in town .
There's probably a rc frame rail awareness group out there and that's what they do point out frame rails 😂😂
Love it! They probably have a poster of my old yota hanging as a dart board 😆
Well hopefully they don't look at my truck's you can see frame rails by the back tires. Lol
I bet the rc police would write me a bunch of tickets if they saw my scx24s my jeep with a C10 body that you can see the frame rails and barrage motor my wheel weights from the tire shop on my eco power servo. The wheel weights hot glued on top of the frame rails behind the rear tires and my stock controller. 😂 May get a little love cause of the furitek ESC . Lol 😆 but I'll put my hillbilly hot rod up against anyone lol 😆😆😂
Love it! Those are usually the best rigs! Whatever works lol
Yep it does really well i think people get into making mods and forget why they got them and that's to drive them and have fun.
I'm running stock shock's with a pinch of Traxxas 20 mill weight grease and a squirt of 3&1 oil and it works. I do have them both front and back like yours don't know why that works but it does 👍
I'm so glad college football is back go huskers 👍
Um, Yeah. You painted your truck a different color than I would have went with so that is wrong and you missed those spots on the back. Lol.
Haha! Well next time I’ll get with you before I take it out of the box 😆
Tejuu …it sounds refined…French 😅
Who cares what they think bet they don't even have an rc.