Thanks for this!! Would you be able to do a video on the process of uploading a design into the software and then engraving it onto a tumbler? Like, from start to finish?
I wonder if Smart Fill is like the Smart Fill that Xtool Mi Creative Space has. That one uses the camera to see a number of similar shapes of material and does all of them. They provided a number of little wooden key chain type tags. Works great I will test it later today on the Wecreat. I am guessing it is. But I just setup the WeCreat machine.
Hi, thanks for your videos..... I was wondering if you might know how to ADD to "MY STUFF". I have yet to find out how to save to that tab. It would be super helpful if you could add to that. Thanks in advance for any info. MaryLou
How do you get the screen when showinh the different kinds of wood to show the select button? Mine only goes down as far on the screen as the test box. 0:33
How do I get my we create to engrave and cut. I did 1 and it turned out perfect. The next one the laser hit the corner of the wood and quit. Now it won’t do anything. Yellow light comes on but doesn’t engrave or print. Did it get knocked out of alignment? Did it burn it out? I don’t know the answer. I have tried everything but I am new to laser and don’t know my head from a hole in the ground. Please help!
@@margaretdavis1630 could have knocked it out of alignment or could be a heating issue. Contact WeCreat support and they will help walk you through next steps
I made this video that will explain them better than I can through text, please check this out here: th-cam.com/video/BLfPIRV_sDE/w-d-xo.htmlsi=RwMzTlQ5qUFZx7hV
Click engrave on settings on the photo portion of your design then there is cut settings for the vector cut line of your design. On the right side of the software.
They can export as a different type from this software, I can’t remember off the top of my head. I can check later. There might be an svg export, I’ll have to look for that too.
So, as it stands right now, I can only save my design in the .wws format (proprietary) that I can see. However, there is an "Extract Image" function that I can't get to work, so maybe that's where they will allow the end user to export files in other file formats.
Currently I don’t think layers works as intended. They are ment to be for each function. One cut, one engrave, and one score. Or for any group of a function you want to make them. I can try to explain it after they update it to a more useable state.
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบ 8 ทีมสุดท้าย] - ช่วงเช้า](http://i.ytimg.com/vi/bXFWzzy4UJw/mqdefault.jpg)
Thanks for this!! Would you be able to do a video on the process of uploading a design into the software and then engraving it onto a tumbler? Like, from start to finish?
If I get time to do this I will make one.
I would like to learn how to upload a file from my iPad to the software
I wonder if Smart Fill is like the Smart Fill that Xtool Mi Creative Space has. That one uses the camera to see a number of similar shapes of material and does all of them.
They provided a number of little wooden key chain type tags. Works great
I will test it later today on the Wecreat. I am guessing it is. But I just setup the WeCreat machine.
Yes I believe you are correct. After making this video I now believe that is what it is used for after using it more often.
Now to figure out the steps to make it happen.
Hi, thanks for your videos..... I was wondering if you might know how to ADD to "MY STUFF". I have yet to find out how to save to that tab. It would be super helpful if you could add to that. Thanks in advance for any info. MaryLou
I’ve never tried that yet
How do you get the screen when showinh the different kinds of wood to show the select button? Mine only goes down as far on the screen as the test box. 0:33
@@spyderadventures check out my other video th-cam.com/video/K7gNSc10wnY/w-d-xo.htmlsi=_MCARfQ-BCYReMuD
How do I get my we create to engrave and cut. I did 1 and it turned out perfect. The next one the laser hit the corner of the wood and quit. Now it won’t do anything. Yellow light comes on but doesn’t engrave or print. Did it get knocked out of alignment? Did it burn it out? I don’t know the answer. I have tried everything but I am new to laser and don’t know my head from a hole in the ground. Please help!
@@margaretdavis1630 could have knocked it out of alignment or could be a heating issue. Contact WeCreat support and they will help walk you through next steps
How do we weld shapes together so it only cuts along the perimeter and not everywhere the shapes touch?
I don’t think there is a weld option yet that I seen. I do all of my designing in illustrator or Inkscape first then import the file to this software.
Great video
Thanks
What is the difference between score, cut, and engrave?
I made this video that will explain them better than I can through text, please check this out here: th-cam.com/video/BLfPIRV_sDE/w-d-xo.htmlsi=RwMzTlQ5qUFZx7hV
nice video how do i engrave then do a cut at the same time
Click engrave on settings on the photo portion of your design then there is cut settings for the vector cut line of your design. On the right side of the software.
When do they ship?
Later this month in October they start shipping.
Can you turn into svg from here?
They can export as a different type from this software, I can’t remember off the top of my head. I can check later. There might be an svg export, I’ll have to look for that too.
So, as it stands right now, I can only save my design in the .wws format (proprietary) that I can see. However, there is an "Extract Image" function that I can't get to work, so maybe that's where they will allow the end user to export files in other file formats.
@@Mnpcreations it seems so
How do you type your own text? "Hello" is getting old!
Double click on the hello text then erase it and type something else in
Be sure to join our WeCreat Users Group on Facebook here: facebook.com/groups/1621878714887002/?ref=share_group_link
Could you explain layers next time
Currently I don’t think layers works as intended. They are ment to be for each function. One cut, one engrave, and one score. Or for any group of a function you want to make them. I can try to explain it after they update it to a more useable state.
This very simular to the xtool software
I’m not sure, I don’t own an Xtool to see there software.