➤ Diy 1000 Watts High Power Hybrid Amplifier - V2: th-cam.com/video/DKDC4to1WjU/w-d-xo.html ➤Diy 1000 Watts Heavy Bass High Power Amplifier - V3: th-cam.com/video/2Nm642p_jBQ/w-d-xo.html *NOTE:* *Output "up to 500 Watt Mono", "1000 Watts for the stereo" amplifier circuit. In description clearly stated* This is a project that requires advanced knowledge of electronics related to audio. The cost of the project is relatively high. If your knowledge is not at a level where you can understand the project, you may fail and lose a good amount of money. If you are a beginner, we recommend starting with less complex and cheaper projects. Gradually you will gain the knowledge needed to make this type of amplifier*
I always wondered if you could set up electronics like this! Thanks for showing us all. I'm new to the world of electronics and it's been along time coming cause I've always been interested but never was able to get to it and do it hahaha
@@ShareTechCreative I actually want to run a 1500 watt subwoofer using a amplifier.. But a class A would be a REALLY bad choice for that because of heat management... can you kindly make a quick video on class D amplifiers and also provide the schematic for the same?
Spiacente dirle che forse saranno 1000w PMPO ammesso che ci arrivi con le dovute misurazioni, senza offesa ovviamente. Il mio che feci nel 1991 tuttora funzionante eroga 500 +500W rms a 8 Ohm di impedenza con molti Ampére e 4000W a 1 Ohm con picchi che superano i 130 Ampére. Capacità di filtraggio di 270000 uf per canale. L'uscita usa cavi da 20mmquadri di sezione. Roba da audiofili. Comunque le do i miei complimenti per la realizzazione di questo semplice amplificatore .
Nice job! But it would be nice if you could demonstrate the power output with somthing other than a thumping speaker.. perhaps a dummy load and an oscilloscope. Just saying. Otherwise, nice work!
Super inspiring channel you got here!! One day I would like to build a high end, super simple 4- track cassette recorder to record my SLAWJAMMERS . Can't find any videos of people doing that kinda of thing.
Hi, I would like to ask ... I made the same amp like this, following every step. I put the same components as in the video. However, it doesn't work for me ... it doesn't make any sound, it just buzzes and there is no sound. When turned on, only the "BOOM" sound is heard on the speakers and then it only buzzes with that buzzing gradually being muted. Nothing else gives, no sound. Do you know what the problem is and where I went wrong?
@@ShareTechCreative Yes, they are set correctly. Only one resistor, the one with colors, I think is inverted. Do these resistors have + and - or does it matter how they are placed? Thanks...
@@ShareTechCreative It's okay now. The Zener diode was wrongly turned, the cathode was on my ground, so I turned the Zener diode on the ground. Now it works great, I am very satisfied. He pushes very large and strong loudspeaker boxes. Thanks ... Just tell me do you have a video where I can put some protection on the amplifier, in terms of overheating or short circuit?
The soldering arrangement reminds me of the days before integrated circuit boards where everything from TVs to radios just had everything clumped together. This is much more organized than that, though.
Use multi-tap transformer and you could really make that thing come to life you could put +70-0-70 on the output stage and +15-0-15 volts to that op-amp and +30-0-30 volts to the four transistors. Only a suggestion But of course multi-tap transformers cost a whole lot more. And you would have to use more rectifiers and caps. And some nice cooling fans. I know you made it simple lol🤓😜 great work well done.
Superb demonstration indeed. Connecting the components without the circuit board clears the concept of circuit. From this demonstration one can prepare a circuit diagram. Request you to perfect the camera angles. I am eager to make this amplifier.👌🙏🙏
Dear! How much maximum AC voltage this amplifier used.??? Can I used 55-0-55 (30A) transformer??? Or 50-0-50 transformer is the maximum voltage transformer for this amplifier???
@@ShareTechCreative Sir! I want to know that which is the maximum last Limit of voltages required for this circuit. I know minimum voltages required for this circuit are 45VAC but I don't know that how big transformer can I used for this circuit.?I want to used 65-0-65 but I'm not sure that 65VAC blasted or damage the circuit. please Guide me sir 🙏
not to sound like an asshat. but would it be possible to give a wiring diagram for this setup? I feel there is a physically smaller and more efficient way to set it up. and still get the 500w mono/1000w stereo setup. I am not insulting or berating your work. I just would like to try the same thing but on a smaller scale.
Hello. I can not find the transistor IC HA17741 where I live. I was able to find the UA741 instead. Can I use this transistor for this circuit? Please advice. Thanks
For a example the 1n4744A is a 15 volt 1watt zener diode and a 1n965b is a 15 volt 5 watts zener diode.✌️🤗 So what I am asking what is the number on the zener diode or at least how many watts is it because if you put too many watts to a component you could burn it up as well know what I'm saying. thank you 🤓 and thank you for getting back with me Highly appreciated 😃
The project was awesome you need more improvements Sir! Be sure sir that you have good explanation also for everything and also when the connection becomes too complicated then explain through diagram also , and in such type of videos if possible explanaining through mouth will be considered 100/100 , We experts can understand these connections but somehow it becomes too difficult for newbie intrested in these things ! THANK YOU LOTS OF LOVE FROM 🇵🇰 PAKISTAN
@@ShareTechCreative don't be upset .. in my way I appreciate your work and professionalism in electronics ... the circuits presented by you work well but they don't seem to be finished and they are missing something ....I'm not a fan of air circuits except for tests
It’s very nice design, good luck! But, it generates approximately 400-500 watts on 8 ohm, 700-800 watts on 4 ohm. And it is hard to changing any transistor. You have to design on pcb 👍🏻
![[DIY] 1000 watt High Power TBM Amplifier Board Using 2SA1943 & 2SC5200 Transistors #cbzproject](http://i.ytimg.com/vi/zXyC22Wvbrg/mqdefault.jpg)
![[DIY] 1000 watt High Power TBM Amplifier Board Using 2SA1943 & 2SC5200 Transistors #cbzproject](/img/tr.png)
➤ Diy 1000 Watts High Power Hybrid Amplifier - V2: th-cam.com/video/DKDC4to1WjU/w-d-xo.html
➤Diy 1000 Watts Heavy Bass High Power Amplifier - V3: th-cam.com/video/2Nm642p_jBQ/w-d-xo.html
*NOTE:* *Output "up to 500 Watt Mono", "1000 Watts for the stereo" amplifier circuit. In description clearly stated*
This is a project that requires advanced knowledge of electronics related to audio. The cost of the project is relatively high. If your knowledge is not at a level where you can understand the project, you may fail and lose a good amount of money.
If you are a beginner, we recommend starting with less complex and cheaper projects. Gradually you will gain the knowledge needed to make this type of amplifier*
Minta skemanya bos. WA 081357727311
You loved your own comment? That sir is bold. Too bold... lol
How much did you spend on the materials for this build? Just an estimate. :D
Why are you using BJTs instead of MOSFETs?
Bahat achha laga amplifire lekin ...bass &treeble ka connection nahi kiye.....please ussko v karke dikhayen....THANK YOU..😊
Your really cutting it fine, without much heavier capacitance to sink the current needed for the transistors.
Mạch khuếch đại công suất sử dụng IC HA17741, cảm ơn bạn đã hướng dẫn cách làm
Thanks
I always wondered if you could set up electronics like this! Thanks for showing us all. I'm new to the world of electronics and it's been along time coming cause I've always been interested but never was able to get to it and do it hahaha
Yes you can!
how did you manage the heat dissipation part, i am pretty sure the heatsink would get hot anyway
Yes, this circuit is only a demo test, you need a much bigger heatsink when using it.
@@ShareTechCreative I actually want to run a 1500 watt subwoofer using a amplifier.. But a class A would be a REALLY bad choice for that because of heat management... can you kindly make a quick video on class D amplifiers and also provide the schematic for the same?
Spiacente dirle che forse saranno 1000w PMPO ammesso che ci arrivi con le dovute misurazioni, senza offesa ovviamente. Il mio che feci nel 1991 tuttora funzionante eroga 500 +500W rms a 8 Ohm di impedenza con molti Ampére e 4000W a 1 Ohm con picchi che superano i 130 Ampére. Capacità di filtraggio di 270000 uf per canale. L'uscita usa cavi da 20mmquadri di sezione. Roba da audiofili. Comunque le do i miei complimenti per la realizzazione di questo semplice amplificatore .
Add a tone stack and you have Bass guitar amp head.
It's easier and more practical if you can add the schematic diag. or where it can be found.
You check the video description
😊 Like 10 Good video my friend👍👍👍
Thanks my friend
Nice job! But it would be nice if you could demonstrate the power output with somthing other than a thumping speaker.. perhaps a dummy load and an oscilloscope. Just saying. Otherwise, nice work!
Thanks
What Ic can replace the HA17782....cos here we only have jrc4558
You can replace them if you know the pin construction of these two ic. Thank you for watching the video and leaving a comment.
Can this be used as a bass guitar amp?
Yes can, but you need to connect an additional preamplifier circuit
thanks for the reply and thanks for the new links. I have some preamp circuits that can use again thanks
What resistor ohms did you used for the center of the power transistor.
1.07 what is it 2sc5200 or 2sa1943 ??
Yes, 2sa1943
Very good Demo for Amplifier
Thanks!
Why mica insulators with plastic body transistors?
What do you think?! :D Check the other side of the transistor!!!
Super inspiring channel you got here!! One day I would like to build a high end, super simple 4- track cassette recorder to record my SLAWJAMMERS . Can't find any videos of people doing that kinda of thing.
You can do it!
I love it, very clean sound good job sir👍👏👏👏 nice.
Thanks
Wouldn't be surprised if this is what my neighbor uses.
When I turn up the volume up on my system I think the Police Station can hear it a kilometer away because within 5 minuets there outside :))
Let me guess you all are neighbors lol😂
Tự làm bộ khuếch đại công suất cao, hướng dẫn hay lắm bạn
Nice brooo 👍👍
Thanks
I need the connection diagram. can you share it with me.Thank you 👍
Check description! Thanks
Hi, I would like to ask ... I made the same amp like this, following every step. I put the same components as in the video. However, it doesn't work for me ... it doesn't make any sound, it just buzzes and there is no sound. When turned on, only the "BOOM" sound is heard on the speakers and then it only buzzes with that buzzing gradually being muted. Nothing else gives, no sound. Do you know what the problem is and where I went wrong?
Did you double check the components for inversion or misplacement? Thank you, good luck
@@ShareTechCreative Yes, they are set correctly. Only one resistor, the one with colors, I think is inverted. Do these resistors have + and - or does it matter how they are placed? Thanks...
Resistors do not distinguish polarity, only transistors and ic, diodes in the circuit only!
@@ShareTechCreative It's okay now. The Zener diode was wrongly turned, the cathode was on my ground, so I turned the Zener diode on the ground. Now it works great, I am very satisfied. He pushes very large and strong loudspeaker boxes. Thanks ... Just tell me do you have a video where I can put some protection on the amplifier, in terms of overheating or short circuit?
Your circuit designs are really beautiful.
Thank you very much!
The soldering arrangement reminds me of the days before integrated circuit boards where everything from TVs to radios just had everything clumped together. This is much more organized than that, though.
But hand soldering things is more valuable than using PCB boards
People will pay more money for hand soldering opposed to a PCB board
@@SS-mj2mq a fall and all goes boom. That's why I am reluctant building this raw.
@@SS-mj2mq why not just build the driver stage on a perf board.
Hola , a este circuito se le puede adaptar un módulo de Bluetooth??
Sí, se puede conectar con una placa Bluetooth
Nagyon super!!!🙂🙂🙂
Thank you!
hay thật nha hehe mạch bass sâu ghê
sir for car amp ? 12v ?
Please wait
Maximum volts can be the AC transformer?
50vac x 2 transformer
@@ShareTechCreative Can I use a transformer with 55 + 55v AC?
Use multi-tap transformer and you could really make that thing come to life you could put +70-0-70 on the output stage and +15-0-15 volts to that op-amp and +30-0-30 volts to the four transistors.
Only a suggestion
But of course multi-tap transformers cost a whole lot more. And you would have to use more rectifiers and caps. And some nice cooling fans.
I know you made it simple lol🤓😜 great work well done.
Why do you need that coil before the speaker?
Maaf bossque.. Itu di pendinginya tdk di beli alas isilator , apa gk konslet..? Maaf sy pemula.. Swn.
What size of wire you use for the circuit?
Copper Wire, 20 Gauge
How did u connect 10uf capacitors together.i meant negative and positive..please explain it
i think its for pure ac signal input...
Superb demonstration indeed. Connecting the components without the circuit board clears the concept of circuit. From this demonstration one can prepare a circuit diagram. Request you to perfect the camera angles. I am eager to make this amplifier.👌🙏🙏
Glad you liked it
Wow emezing...kren banget bos
que funcion tiene esa resistencia a la base de los transistores de potencia?
Mantap
Thanks
what will change if more transistors are added to the circuit?
What do you think will change ?
Its stabil too on 4ohm speaker? For a subwoofer.
Yes, right
Dear!
How much maximum AC voltage this amplifier used.??? Can I used 55-0-55 (30A) transformer??? Or 50-0-50 transformer is the maximum voltage transformer for this amplifier???
You use up to 50-0-50 transformer
@@ShareTechCreative Sir! I want to know that which is the maximum last Limit of voltages required for this circuit.
I know minimum voltages required for this circuit are 45VAC but I don't know that how big transformer can I used for this circuit.?I want to used 65-0-65 but I'm not sure that 65VAC blasted or damage the circuit. please Guide me sir 🙏
Quá hữu ích tuyệt vời lắm enh zai giỏi lắm em zai nhé
very cool what kind of distortion and signal to noise ratio can be expected.
could it be used as radio signal power amplifier too??
it is ok if i used
d1047 & d618?
and if i replace .33ohms to 10watss
and bd139 & bd140
it is posible to add dividing network
for speaker output?
dear, tell me, what is the quiescent current obtained on the diodes, relative to the midpoint?
Thanks for sharing 👍
Many many thanks
Berry GooD 👍👍
Many many thanks
not to sound like an asshat. but would it be possible to give a wiring diagram for this setup? I feel there is a physically smaller and more efficient way to set it up. and still get the 500w mono/1000w stereo setup. I am not insulting or berating your work. I just would like to try the same thing but on a smaller scale.
There's a schematic in the video description . Have a look and you'll find it.
excelente trabajo muy buenos vídeos saludos de uruguay
Excellent job, do you need to build two for stereo?
1000 W ??? Maybe 10 W - without a panel surrounding the woofer membrane, the waves compensate each other by making the air displacement vain.
I have a 24-0-24 3amp transformer can i use it or can i use any adaptors? Please reply
24v x 2 source you should use this amplifier circuit: th-cam.com/video/eYw17LG8LV0/w-d-xo.html
What type of soldering wire do you use sir?
Ingredients: Tin 63% - Lead 37%
Wire diameter: 1.0 ÷ 1.2mm
Welding filler (resin): 1.2%
Melting temperature: 157 ° C
@@ShareTechCreative I bought a Chinese base but is awful horrible and the one you solder with looks like cream
How clean signal is this?
Is this a RMS rated?or PMPO?
Is this a rockola op amp??
Super!👍
Just imagine you would build that thing even longer!
This is a very creative idea for a DIY. 👏
Nice Guru
Which PCB i should use ??
Look good men..nice sharing design
Thank you very much
Why don't you mention with each step what the function is of the component you're going to solder and why it has to be placed that position?
These transistors are very expensive here in Brazil and the porcelain resistor is also expensive. can I replace with the mje13007 transistor?
Que modelo de reproductor de MP3 es ese que tienes amigo😍
Nice build mate.
Thanks 👍
This amplifier able to long time use???
Hello.
I can not find the transistor IC HA17741 where I live.
I was able to find the UA741 instead. Can I use this transistor for this circuit?
Please advice.
Thanks
Yes, you can
Hola amigo como que costo tiene llevar a cavo este proyecto??
Without a diagram - soldering master class
For a example the 1n4744A is a 15 volt 1watt zener diode and a 1n965b is a 15 volt 5 watts zener diode.✌️🤗 So what I am asking what is the number on the zener diode or at least how many watts is it because if you put too many watts to a component you could burn it up as well know what I'm saying. thank you 🤓 and thank you for getting back with me
Highly appreciated 😃
What a beautiful amplifier ❤️❤️❤️❤️❤️❤️.
The project was awesome you need more improvements Sir!
Be sure sir that you have good explanation also for everything and also when the connection becomes too complicated then explain through diagram also , and in such type of videos if possible explanaining through mouth will be considered 100/100 , We experts can understand these connections but somehow it becomes too difficult for newbie intrested in these things ! THANK YOU
LOTS OF LOVE FROM 🇵🇰 PAKISTAN
What is the coil for? Makeshift induction?
Filter and protection
Super!🙂
Thank you!
May I substitute HA17741 with LM301A or uPC157? 301 better than 741.
Cheers from Indonesia
ibles bosuok AD711JN,OPA134- best choice!! LM301,741 - bad OP AMP..for sound
wow!!! nice one a simple circuit for a mono amp. if you double this circuit it will be a stereo, right? I like it Sir..
Yes, correct
Great job nice work yeah that thing can put out some power obviously
Thanks😍
@@ShareTechCreative you're very welcome 🤓✌️
Gracias por tu buen Video. tengo 5 transistores C3519A Y 5 transistores A1386A aplicaría los demás componentes como están en el video?
Yes, you can
wow a unique way, without a scheme in assembling a power amplifier
Glad you like it!
Where I can buy the transformer?
why didn't you put the parts on the pcb?......it looks like an improvisation and it's a shame if it works well it doesn't look good
Thanks for comments
@@ShareTechCreative don't be upset .. in my way I appreciate your work and professionalism in electronics ... the circuits presented by you work well but they don't seem to be finished and they are missing something ....I'm not a fan of air circuits except for tests
Do you have diagram of this and pcb design board?
Schematic diagram links in the description
Si Peta un transistor se avería los otros?
I wonder what it would sound like if he enclosed the speaker in an appropriate box or purchased a home audio speaj=ker
nice, i wish i could make it, but i will have to fight with all my neighbour around me ahah
Oh no!
So nice neat and clean
Can you pass me the website where you bought the power supply?
Because I can't find the class is the power shown in the picture
You refer here:
www.aliexpress.com/i/32831571592.html
Great can you provide the circuit diagram in pdf format
How can I connect this to 12v dc? Please you can help me? I don't have too much experience.
12 volts will not run that thing
I really liked the amplifier, this 1000W power is at what 8ohm output impedance?
How many speakers can take load this circuit
Qua ok luo ban ơ..
Hay quá anh ơi
Good thanks for share
Always welcome
Tell me bout the coil, need to know to wind it
Can we connect a preamp to give sound
It’s very nice design, good luck! But, it generates approximately 400-500 watts on 8 ohm, 700-800 watts on 4 ohm. And it is hard to changing any transistor. You have to design on pcb 👍🏻
Thanks for the info
O esquema não aparece mas o link ta inválido
photos.app.goo.gl/U7MRJkzURtd4YFjF7
@@ShareTechCreative obrigado