Howdy Sandy- glad see the rafters going up. Hopefully, the snow will have mercy on you and you can get the roof on before the bad stuff shows up. Take care and be safe. God bless
You probably have gotten some snow since you did this,SO we're sending some more your way. The good thing is that all that up an down is good exercise, have a good one Sandy
That was a big step forward getting there i know by now you guys gad snow if not staying still had aome snow fall i don't want to tell hiw to do things but now that you seen the picture of the home made scaffold this today's video would of been really nice to have you could of put all your pieces ready to grab and then go up one time and do all the nailing and walking on a walk way so if you do another building it would be some think about the time you took to built the scaffold this was the perfect example to gain time back and aot less up and down like a yoyo lol but i know the video you show it not not done on the day you upload them can wait to see how the rest will come out . By the way it took alittle longer to set everything scare and plumb but now you are saving time because you down have to fight anything have a great day
Thanks for coming along for the video. I thought hard about the wooden scaffolding you mentioned but I didn't think I had it in me to take on a scaffold setup with limited lumber milled and the size of the wood scaffold I'd need to build I figured
Hey Sandy, great video as always. My son and I are about to cut the lumber for our sawmill shed (southern yellow pine). Do you cut yours rough 2x6, etc… or do you cut dimensional (1.5”x5.5”)? Do you primarily use the gauge on the mill (we have the 130max as well) and which one? Do you plane after? You have a lot more experience building with green lumber and any insight would help. Thank you!
That a 20' span? Or something close to that? I know most bandmills are generally under 20' until you add extra track. seeing the bark on the corners, really shows the size limits of the trees, in the local climate. . We have been thinking about it for years getting a roof over the hole mill, would require a over 26' clear span.
That's a good size span at 26' for sure. I'd likely go to a LVL or steel beam in that case depending on how much snow you get. Thanks for coming a long for the video!
I gotta say lol I think all of us diy sawyers and builders have the same methods of building our own structures lol we know the lumber is rough sawn rough dimension so the building is gonna be roughly square/true lol 😂 this video literally reminds me of building my first mill shed for my first woodland mills sawmill. I bought an hm122 in 2017 lol and that mill got a workout over the years and then I sold it during Covid pricing for more than what I paid for it when I bought it in 2017 lol can’t complain there. Then like every other sawyer….i wanted a “bigger” mill cause I acquired bigger logs lol so I bought the biggest and best mill woodland mills had to offer which was the hm130max woodlander. Once again I milled all my own lumber to cover the new mill for the snow we get in central Ontario (northern Kawartha lakes) and I made my old mill shed into a firewood shelter lol . I call it a success it has been erected for 5 years now with no issues lol if anyone is wondering to pull the trigger on a woodland mills sawmill…. All I gotta say is you will not be dissapointed!! The mill is very reliable as long as your preventative maintenance is reliable if you know what I mean. I’ve owned 2 of their mills now and I have had very good luck with them and they have made me probably over 20 grand in lumber over the years I always recommend woodland mills to all my friends and customers!! Keep up all the great videos and great work 👌
Hi Rodney, I've done all kinds of things for sure in the past. Really enjoy getting out here and swinging the air hammer but the main thing that's challenging here is I'm not getting any younger so my body tells me to slow down more often than it used to haha
Looking great! Glad you've been able to get that much done before the snow flies!
Thanks Earl! I was real lucky for sure
If it wasn't such a long drive from here in the Houston area, I would love to come give you a hand getting the rest of the rafters up.
That would be awesome! I sure would be appreciative for the help My legs are sure done after a day of up and down the ladders
You're amazing Sandy! Thank you for sharing and Merry Christmas. God bless you!
Thank you Rich! Merry Christmas!
Awesome progress my friend , especially by yourself ! Be safe and thanks for sharing !!!!! 🙏👍😊❤️
Thanks David! Coming right along
Sawmill shed is coming along. Got alot done, hopefully you'll have some more good days for mlling and getting those rafters done!!
Thanks jmar! I'm sure I"m due for some pay back with this prolonged fall weather
Howdy Sandy- glad see the rafters going up. Hopefully, the snow will have mercy on you and you can get the roof on before the bad stuff shows up. Take care and be safe. God bless
Thank you!
Awe inspiring, good job Sandy!
Thank you!
It’s coming along Sandy , keep up the good work.
Thanks for that Perry!
You probably have gotten some snow since you did this,SO we're sending some more your way. The good thing is that all that up an down is good exercise, have a good one Sandy
Sure helps me sleep good at night
Lots of up and down on that ladder, oh my , sympathetically aching knees. As for the battery nailers, better the devil you know. Good vid. Thanks.
I'm a big fan of the air nailers for sure
Hello my friend, hope you are good with all the snow load that we got last week. Stay safe
Thanks Antoine!
looking good
Hey Ken!
👍great video, Sandy 🙂
Hey there Paul!
Peace been awhile since I commented. Blessings
Great to hear from you Joseph !
That was a big step forward getting there i know by now you guys gad snow if not staying still had aome snow fall i don't want to tell hiw to do things but now that you seen the picture of the home made scaffold this today's video would of been really nice to have you could of put all your pieces ready to grab and then go up one time and do all the nailing and walking on a walk way so if you do another building it would be some think about the time you took to built the scaffold this was the perfect example to gain time back and aot less up and down like a yoyo lol but i know the video you show it not not done on the day you upload them can wait to see how the rest will come out .
By the way it took alittle longer to set everything scare and plumb but now you are saving time because you down have to fight anything have a great day
Sorry about all the spelling error my phone went nut after I sent my comment
Thanks for coming along for the video. I thought hard about the wooden scaffolding you mentioned but I didn't think I had it in me to take on a scaffold setup with limited lumber milled and the size of the wood scaffold I'd need to build I figured
Hey Sandy, great video as always. My son and I are about to cut the lumber for our sawmill shed (southern yellow pine). Do you cut yours rough 2x6, etc… or do you cut dimensional (1.5”x5.5”)? Do you primarily use the gauge on the mill (we have the 130max as well) and which one? Do you plane after?
You have a lot more experience building with green lumber and any insight would help. Thank you!
Sandy, where is the Snow the rest of the province has some?
hey Mike! Stay tuned for a future video as I've got some big news about the snow. Real BIG
@@sawingwithsandy that should make your project a lot more interesting! 😉
hahah you've got that right Kevin!
That a 20' span? Or something close to that? I know most bandmills are generally under 20' until you add extra track.
seeing the bark on the corners, really shows the size limits of the trees, in the local climate.
.
We have been thinking about it for years getting a roof over the hole mill, would require a over 26' clear span.
That's a good size span at 26' for sure. I'd likely go to a LVL or steel beam in that case depending on how much snow you get. Thanks for coming a long for the video!
@sawingwithsandy
Code is 50lbs white stuff, per square foot.
I've used LVL's on big spans before and they are great to work with. Only thing I don't like about LVL's are the weight and the price haha
I gotta say lol I think all of us diy sawyers and builders have the same methods of building our own structures lol we know the lumber is rough sawn rough dimension so the building is gonna be roughly square/true lol 😂 this video literally reminds me of building my first mill shed for my first woodland mills sawmill. I bought an hm122 in 2017 lol and that mill got a workout over the years and then I sold it during Covid pricing for more than what I paid for it when I bought it in 2017 lol can’t complain there. Then like every other sawyer….i wanted a “bigger” mill cause I acquired bigger logs lol so I bought the biggest and best mill woodland mills had to offer which was the hm130max woodlander. Once again I milled all my own lumber to cover the new mill for the snow we get in central Ontario (northern Kawartha lakes) and I made my old mill shed into a firewood shelter lol . I call it a success it has been erected for 5 years now with no issues lol if anyone is wondering to pull the trigger on a woodland mills sawmill…. All I gotta say is you will not be dissapointed!! The mill is very reliable as long as your preventative maintenance is reliable if you know what I mean. I’ve owned 2 of their mills now and I have had very good luck with them and they have made me probably over 20 grand in lumber over the years I always recommend woodland mills to all my friends and customers!! Keep up all the great videos and great work 👌
Good to see you here on the video and thanks for coming along for the project!
Sandy was this always your trade other than sawmill? It has to be pretty hard for this type of mill shed to be done by your self. but looks awesome.
Hi Rodney, I've done all kinds of things for sure in the past. Really enjoy getting out here and swinging the air hammer but the main thing that's challenging here is I'm not getting any younger so my body tells me to slow down more often than it used to haha