DIY Backlight/LED Tester from LED tube

12:31 Basic resistor calculation for constant current output
17:37 Wiring and Boxing
19:04 Shoutout
21:34 Testing
Kuryente
part1 - • part1 KURYENTE - Ano a...
part2 - • part2 KURYENTE - GFCI/...
part3 - • part3 KURYENTE - GFCI/...
Please don't forget to Like and Subscribe po :)
Comments and Suggestions are welcome.
Please check my other videos : )
AC power inverters. Pure Sine Wave vs Modified Square Wave?
• AC power inverters. Pu...
SCR - How to test using an Analog multimeter only.
• SCR - How to test usin...
RIDEN RD6006 POWER SUPPLY MODULE
• RIDEN RD6006 POWER SUP...
Thyristor - What are SCR, Triac, Diac and how to test (tagalog)
• Thyristor - What are S...
Hantek 6022BE Oscilloscope - Unboxing and basic reviews.
• Hantek 6022BE Oscillos...
UNI-T UT210D - AC/DC Clamp Meter Review and testing.
• UNI-T UT210D - AC/DC C...
SONOFF - Remotely monitor and turn ON and OFF your equipments
• SONOFF - Remotely turn...
OPTO-ISOLATOR - Basic details and How to test
• OPTO-ISOLATOR - Basic ...
Zener Diode - details and how to test. (Tagalog)
• Zener Diode - details ...
Save your components from accidental short circuit.(series with 30~200 watts lamp)
• Save your components f...
BJT vs MOSFET vs IGBT differences and how to test accurately.
• BJT vs MOSFET vs IGBT ...
Disclaimer:
This video is not sponsored.
I'm simply documenting my projects for informational purposes, this video is not an instruction. I assume no responsibility or liability for such damage or injury. Mains voltage is dangerous, any action you take upon the information on this channel is strictly at your own risk and responsibility.
#LEDtester
#Backlight
#DIYtester

[@greenyelectronics]

12:31​ Basic resistor calculation for constant current output
17:37​ Wiring and Boxing
19:04​ Shoutout
21:34​ Testing

[@boukharitemessek2596]

Salam in your calculations you show that it is not isolated and then if you use a transformer then it is isolated in this case what kind of transformers would you use. a flyback transformer? i think a small one from a USB charger can fit? what do you suggest

[@FredericoNatividad-ps6ml]

Nice una ko plang napanood ang galing detalyadong Sana Mas marami ka pang MA upload na video sir

[@greenyelectronics]

Thanks for watching po ☺️

[@bernabefaustino1308]

The best backlight tester ever made in diy method,low cost and effective,well done bossing GOD bless to your family

[@greenyelectronics]

God bless and thanks for watching din po 😊

[@HaseebElectronics]

It is superb and useful utilization of LED drive to make as tester
Thanks for sharing your valuable experience

[@greenyelectronics]

It's my pleasure, thank you for watching

[@RAMtronics]

sa dinami dami ng napanood ko e2 ang me magandang paliwanag, detalyado,,,,thanks sir for sharing....godbless more power

[@greenyelectronics]

Welcome po, at thanks for watching din po 😊

[@maktapselectronics]

Daming learnings more video po

[@greenyelectronics]

Thanks for watching po

[@franciscofrancisco4783]

Tama diy.kapag magaling ang tech bakit ka bibili kung merong diy😊😊😊galing mo sir😀

[@greenyelectronics]

Salamat po, at thanks for watching din po 😊

[@KUTINGTINGatbp]

Thank you sir.
New subs po.
Gusto ko style mo s tutorial.
May pa theory explanation pa
God bless po.

[@greenyelectronics]

Thank you po ☺️

[@kneeyou]

Galing sir sana mag video kayo tungkol sa sound system

[@jnc5255]

Wow, maganda din to gamitin sa pagtest ng mga zener, schotky, at rectifier diode din maliit man o malaki. Maraming salamat po sir sa pagshare ng magandang idea mo. Godbless po. Good Job..😃👍👍👍👍👍👍👍👍👍👍

[@greenyelectronics]

yes po pwede sa mga diodes

[@jojomitra3357]

Ganda po ng explanation. Tnx po for sharing

[@greenyelectronics]

Welcome po, thanks for watching din po

[@baguiotechnician]

the best upload ang linaw mag explain sana all GOD BLESS master apple electronics

[@greenyelectronics]

Thanks for the appreciation po and thanks for watching din po 😊

[@reypaholio2739]

Very accurate and informative.thanks for sharing

[@greenyelectronics]

thank you ☺️

[@baringloon4289]

Wow maganda pang tester sa led salamat sir sa share keep on safe

[@greenyelectronics]

Welcome po

[@edwintech2606]

thank you sa mga turo mo master...mlking tulong po...god bless po

[@greenyelectronics]

Welcome po, thanks for watching din po

[@alzkeithtv3104]

willing po ako matuto sa elctronics..
salamat po sa mga tutorial nio sir. godbless you po.
pashout out po from santiago city,isabela..

[@greenyelectronics]

Thanks for watching din po 😊, sige po sa next video nalang po shout out, naupload napo kasi yung last video ko 😊

[@jelynlagudasveral6878]

Ang ganda nang itinoro mo sana ipagpatoloy moyan dahil marami akong matotonan boss.....

[@greenyelectronics]

thanks for watching po

[@xtian2143]

Napakagaling mo po magpaliwanag sir.detalyado..

[@greenyelectronics]

Salamat po 😊

[@jstech1794]

Ang galing mag explain

[@greenyelectronics]

Thank you po

[@salvadorstabaya8032]

gud p.m sir salamat po sa video nyo. lagi ko po kayo inaabangan mga video nyo. salamat po. god bless po..

[@greenyelectronics]

Gud p.m. din po, thanks for watching po

[@mixme8655]

Ganda ng paliwanag thank you sir

[@greenyelectronics]

Salamat po 😊

[@KUARIELtv]

Ganda ng mga tools mo master

[@greenyelectronics]

mahilig tlaga ako sa mga tools master, kung may budget nga lng sana, gusto ko din mga precision test equipments

[@ricolayco6372]

salamat master sa pag share mo ng kaalaman, gayahin ko rin yan

[@greenyelectronics]

Welcome po at thanks for watching din po

[@marmira6217]

Galing ni sir ahh salamat sa information

[@greenyelectronics]

Thank you po ☺️

[@ricardobernardo2603]

NICE SHARING .

[@greenyelectronics]

Thanks for watching po ☺️

[@richardsabino9190]

kakaibang video tutorial madaling maintindihan
thank you sir

[@greenyelectronics]

Thanks for watching din po 😊

[@alkimcellphonetechkie9225]

paano sir kung magka baliktad ang probe mapupundi ba ang ilaw thanks

[@ogietechvlog3912]

ang galing nyo sir may mga aral at kaalaman n naman aqong natutunan s tutorial video mo.at magagamit q s pag gagawa din ng mga led tv patungkol s mga backlight.at 💯%❤sumusuporta s iyong channel.new subscriber po at kaibigan.ang hatid s bahay mo.god bless pos family mo.😇🙏

[@greenyelectronics]

salamat din po sa pag support, at thanks for watching po ☺️

[@andyrabinotvtech7586]

Maramung salanat dir sa pagbah nitong video mo

[@greenyelectronics]

Welcome po

[@carlobasijan7278]

galing nyo po👍👍👍👍👍

[@greenyelectronics]

Thank you po

[@romeicernadura5671]

un my lecture..salamat po sir

[@greenyelectronics]

Welcome po at thanks for watching din po

[@rockyvlog4087]

Salamat may kasama pang kaalaman sa ohm's law!!!!

[@greenyelectronics]

Welcome po, thanks for watching din po

[@jorgetechofficial2368]

Nice lodsasubukan ngang gumamit ng ganyan 👍

[@greenyelectronics]

oo sir kahit yung maliit na led tube lang pwede rin, thanks for watching po

[@westjojotechelectronics9386]

Watching po si kuya full support po

[@greenyelectronics]

Thanks for watching po

[@djp2803]

Thanks for sharing sir

[@greenyelectronics]

Most welcome po, thanks for watching din po

[@AUTODIAGNOSE]

Sir gawa din po kyo ng DIY capacitor tester ng electrolitic at mylar tester combination with explanation salamat po

[@greenyelectronics]

cge po, isasama kopo sa mga naka line up, gagawa narin ako ng comparison ng diy at digital capacitor esr tester, at thanks for watching din po

[@broaddatanetwork8864]

Sir, Mamahalin yung mga gamit nyo! Sana all!

[@greenyelectronics]

yes po hilig ko npo dati pa ang mag collect ng mga tools at testers

[@rcdominicelectrolab9753]

Thanks sa info master..newbie here

[@greenyelectronics]

Welcome po, thanks for watching din po

[@pradeepmahendrasemage4043]

Thanks sir. Congratulations.

[@greenyelectronics]

Thanks for watching din po

[@SanCeGOElectronics]

SanCeGO Electronics is now watching...keep safe

[@greenyelectronics]

Thanks for watching cabalen

[@jumarfranco3796]

Sir tagal ko hinintay upload mo..dami kase ako natutunan..hehe
God bless po more power..

[@greenyelectronics]

Thank you po ☺️

[@jumarfranco3796]

Sana sir makagawa kapa nang maraming content ng ganyan.. dbest..hehe

[@greenyelectronics]

Thank you po, pag uwi ko po dyan sa pilipinas dadamihan ko yung mga uploads ko

[@ramiesarsalejo9547]

Nice tutorial sir

[@greenyelectronics]

Thanks po ☺️

[@kalikot0119]

Nice

[@daveelectronicsrepair8660]

Watching boss ... From Mindanao thnx For sharing ....sir full support musta po....

[@greenyelectronics]

Ayos lang sir, sobrang busy nga lang sa work kaya ngayon lang nakapag upload, thanks for the support po

[@daveelectronicsrepair8660]

@@greenyelectronics Basta ikaw boss...oonga no tagal na ... Ok Lang Yan....

[@hanipbuhay]

New friend Goodluck, Full support Godbless

[@greenyelectronics]

Salamat po, thanks for watching din po

[@productreviewer1]

Very informative, sir!

[@greenyelectronics]

may mas mataas pa po dito

[@michaelteodoreverano7645]

nice one sir

[@greenyelectronics]

Thank you po ☺️

[@zildjiancabrera5985]

galing mo boss idol

[@greenyelectronics]

thamk you po

[@garrymacahilos300]

Thank you for sharing sir,, d ba napupundi kung nka reverse yung prove? Kung isang backlight bulb?

[@eddelromero5692]

Gandang gabi sir pa wash out ako next video hehehhe salamat

[@greenyelectronics]

Gandang gabi din sir, sige po sa next video po, thank you po

[@RyanCrosit]

Watching Sir sorry po na late ako dito Sir. Kaya heto bumabawi..

[@greenyelectronics]

Okay lang po, thanks for watching po

[@LheodaTechTv]

watching again master

[@greenyelectronics]

Thank you po lagi

[@raffyvibes2417]

I love your channel ,nakakarelax ...maraming salamat sir sa pagshare ng kaalaman ..Godbless you always..

[@greenyelectronics]

Thanks for watching din po

[@agustinreyes8014]

Always watching master

[@greenyelectronics]

Thank you po

[@ashleypatron1868]

Pls.upload sir this video T.Y. more power 👍

[@greenyelectronics]

Thanks for watching din po 😊

[@haileynavera7176]

new subscriver thanks for sharing

[@greenyelectronics]

Thanks for subbing po!

[@diosdadoparayno8466]

Salamat boss, mabuhay ka.

[@greenyelectronics]

welcome po at thanks for watching din po

[@mixme8655]

Salamat sir

[@greenyelectronics]

thanks for watching din po 😊

[@08akaneshi]

sir pwede rin ba ito maging backlight driver with its configuration.. since auto volt na sya?

[@marcofrancis713]

Parang nauna aq master 😊 gandang gabi Master 😊

[@greenyelectronics]

Oo nga sir, kayo po ang first, gandang gabi din po. Thank you po

[@mheldomdom7423]

i watching,,,,

[@MackoyTechPh]

Boss nandito nako sa bahay mo.

[@greenyelectronics]

Salamat master, babalikan kita master

[@zaldydeleon1946]

Tanong lng Bro. anong gamit nyng cap. resistor series..many thnks Bro.

[@mirceacluj]

am facut si eu montajul acesta Curenteaza la 300 volti vcc pt ca are spituri de tensiune alternativa Voi mai adauga o dioda la iesire Despre izolatia electrica cu transformator am inteles-o in schema desenata dar nu ai pus in practica trebuiesc doua transormatoare in plus 220/12 si 12/220 iar cel de la smps -ul lampii de neon este al treilea

[@conradcaberte2018]

Gud day po ask lng po since may driver po ang mga led lights bulb or tube ibig sbhin po ba kapag na pundi 1pc led pde ng i-short nlng po ang nasira kesa palitan since may driver nman po na nag cocontrol ng voltage at ampere pr mag distribute ng required voltage at ampere ng individual led po? Ty much

[@stanleyjang4015]

Hello,,I also watched the video and made it with a 10w bulb converter,,And the resistance is 5w41k,,And the voltage is about red 2.1v, but it's thrilling when the probe is touched by both hands,,Is that so,,, the tester voltage is not connected by an electric shock. I'm curious, so I'm asking.
I'd appreciate it if you could answer me.
사전

[@bongelectronics7773]

Watching sir

[@greenyelectronics]

Thanks for watching po

[@angelicamaesanchez6586]

❤❤❤

[@casper8707]

Anu po sir function ng nkaparrallel na resistor at capacitor ung sa number 1 na backlight tester salamat po

[@leozamm53]

Caro amico, premesso che voglio realizzare il tuo progetto, lo zener che hai utilizzato per il led, sul polo negativo, è un 1n4007, ma la resistenza sul positivo che valore ha? saluti dall'Italia.

[@vasquez22]

Hello idol

[@joelcurpinjr3944]

Good job 👍 sir! Pwede po bang lakasan nyo boses nyo nextym mahina Kasi sir,

[@greenyelectronics]

thanks po, yes po tinaas ko na po gain ng mic ko

[@thrashme22]

Sir ask ko po sana pano malaman ang tamang wattage ng led driver na gagamitin para makuha ang tamang liwanag.. atsalamat po

[@tonypaguio1219]

Hello sir ngaun ka lng ulit nag upload ah👍👍👍

[@greenyelectronics]

Oo nga sir, sobrang busy sa work. Thanks for watching po.

[@angellicadeleon5970]

Master pwde din kya gawin bl driver yan ,,

[@greenyelectronics]

pwede po, actually backlight driver npo yan, taasan nyo nlng po wattage ng resistor na nakaseries.

[@jovitocastillo4276]

Good day po. Thank you for sharing this video. Saan po nabibili ang box na ginamit nyo. Tnx.

[@greenyelectronics]

nakuha ko po dati sa china, pero meron din po sa shopee, Waterproof Plastic Electric Project Case po ang name

[@jovitocastillo4276]

@@greenyelectronics Thank you so much G-Apple. God bless you with more knowledge, technique and helpful ideas about electronics to be shared. I 💚 it.

[@vijaythakurrfab-jf4439]

Mind blowing 👍

[@greenyelectronics]

Thank you! Cheers!

[@nilocosmeph6082]

newbie master watching new subscribe

[@greenyelectronics]

Thanks for watching at subs po

[@soweirdfilmandproduction9982]

Nice computation po.kaso dq gano makita kc hindi pentel pen at hindi illustration bỏad compare sa iba

[@greenyelectronics]

oo nga po medyo malabo nagamit kong pen, sige po nxt time marker ggmitin ko. thanks for watching po

[@mpaisensei8728]

Hello po, ano pa po bang iba na led driver as alternative po if wala pong ganyan na led tube driver

[@greenyelectronics]

try nyo po yung malaking led bulb

[@mpaisensei8728]

@@greenyelectronics meron po akong nakuha sa 45w led buld po 123v output din nag tester ako ng continuity sa in at out po both wala po continuity meaning po ba isolated then yun po??

[@conradcaberte2018]

Gud day po, Naka design po b particular ung model ng tester nyo po to test ac/dc current po?ty much po

[@greenyelectronics]

yes po, nkadesign po siya. kaso gang 10amps max lng po. kapag higher than that yung clamp npo ginagamit ko na may 200amps max ac dc

[@jojoleocadio]

Puwede pobang gawing inverter yan sa tv

[@greenyelectronics]

yung iba po idinadirect nila, gumagana nmn po kaso hindi kopo nirerecomend.

[@ScrewBot]

Good day Sir. Amazing Video. I dont understand malay language but i still understood your video even without subtitle, you are that good. Sir, am just confused as i could not understand the audio, how is it that we still get 315v DC after connecting the 2 resistors in series with the output probes. Please can you explain? I am really interested in building this tester. Can it also test the values of Zener Diaodes? Thank you.

[@greenyelectronics]

resistors limits the flow of current only, not voltage. yes it can measure zener voltage

[@ScrewBot]

@@greenyelectronics Thank you so much.. But dont the resistors also work as voltage dividers in circuit? Limiting voltage?

[@ScrewBot]

@@greenyelectronics understood sir. Thank you again for your videos. Sir can you have subtitles in all your videos? I learnt a lit about BJT Mosfet from your subtitles. Request you to upload videos with subtitles. It will help the world at large. Thank you again.

[@greenyelectronics]

@@ScrewBot Yes it can devide voltages in a voltage divider configuration but not in series

[@greenyelectronics]

@@ScrewBot okay i will add subtitles, thanks for watching : )

[@pedromanaog2530]

pinapanood ko po mga presentation mo.I like and share kona po.Dito sa bahay namin sir halos mga LED na ang ginamit ko pero kadalasan ang problema blinking.Question: Ano po ang main problem po kaya nito sir?

[@greenyelectronics]

pag blinking po sa driver po yan

[@pedromanaog2530]

if sa driver po,saan po ang kadalasan ang sira if eh try kong ayusin sayang kasi marami rin itong driver na sira? balak kung pag practisan hehe pero naman akong basic electronics kaso lang kulang pa ang kalaman ko sa trouble shooting.

[@braveheart6805]

sir pwde rin bng pangtest ng capacitor yan?tnx and Godbless

[@greenyelectronics]

yung ibang mga kaibigan po nating tech ginagamit din nila pangcharge ng capacitor, then isshort nila para malaman kung gaano pa kalakas ang holding capacity ng capacitor

[@conradcaberte2018]

sir ask lng po npansin kopo s digital tester mopo, lahat po b ng digital tester capable makapag test ng ampere using parallel connections po or naka design po ung digital tester nyo to test ampere in parallel po? , ty much po

[@greenyelectronics]

Dyan po sa video voltage po sinukat ko, sa ibang videos ko po gumagamit akong ac dc clamp meter pa makameasure ng dc current

[@haileynavera7176]

boss ung nilagay mo ba na diode sa led in4001@100ohms na resistor..thanks

[@greenyelectronics]

1N4007 po at 4K na resistor

[@haileynavera7176]

@@greenyelectronics salamat po

[@elmersaycon434]

sir, pwede yan lagyan ng volt meter para makita nanatin ang voltahi sa led ng walang tester. salamat po.

[@greenyelectronics]

pwedeng pwede po, thanks for watching po

[@mr.marksman5726]

Sir pwd ba yung 33k 2w sa negative ba nillgay yung resistor

[@greenyelectronics]

kung pangtest lng po pasaglit saglit at d nmn ibababad pwede napo yun

[@greenyelectronics]

positive or negative pwede po

[@jerseyvinluan8055]

Sir gusto kong gawing decoration yong spare ko dito na backlight galing sa led tv ko..paano po ba paiilawin yon??salamat po

[@greenyelectronics]

supplyan nyo lang po, gamit kayo backlight driver

[@mistybalmes5323]

sir gud day paano po kung hindi isolated? pwed rin ba iaaply same procedure?

[@greenyelectronics]

pwede nman po, kaso kailangan po magingat pag ginagamit na, posible po na makuryente kayo pag nahawakan nyo

[@mangyantech3729]

good job sir ask ko Lang sir electronics engr po ba kayo

[@greenyelectronics]

computer engr. po na napahilig sa electronics

[@jstech1794]

Sir, pwede din ba gamitin yan as backlight driver?

[@greenyelectronics]

pwedeng pwede po, kaso taas nyo nlng po wattage ng resistor

[@richardrodrigo9156]

Boss DIY mo lng ba Yung gamit mo na 220vac supply at safe ba yn ganyan. Salamat

[@greenyelectronics]

yes po diy po, may video po ako kung paano ko ginawa yan, pa watch po ☺️. regarding safety, kailangan po ng extra pagiingat kapag 220volts na ginagawa.

[@tropangkalikot8925]

Sir lang ohms at watts yung nilagay mo sa Led Power indicator at ilang Volts po yung Led salamat po

[@greenyelectronics]

14K po na 1watt, yung led po 2.2volts tas diode po na 1n4004 para halfwave lang ang ppasok sa led.

[@haileynavera7176]

boss bago ba ung led tube na ginamit mo magkano ung ganyan .mahal kasi ang back light led try ko sana gayahin ung ginawa mo..thanks

[@greenyelectronics]

yes po bago, sobra namin sa project namin, wla na pag gagamitan

[@bryansoleta2101]

Yung led boss n red at resistor diode saan naka konek yun

[@greenyelectronics]

nkarallel po sa input ng cuircuit, after ng switch, sa 220vac po

[@christianlagunsad2348]

Ilang ohms po nang resistor sir yung nakalagay sa switch mo at yung diode .

[@greenyelectronics]

4k po na resistor at 1N4007 lang po

[@christianlagunsad2348]

Ssalamat ❤️❤️

[@mpaisensei8728]

More powers po lodi and more raffles po haha sana mapili

[@romeobaltazar8173]

boss pag 48.5 v dc boss ilng watt ung resistor boss

[@romeobaltazar8173]

1/4 -48ohm tama ba boss kaya ba pailawin ung buong strip ng led boss 48 v bc lng ang out pot niya boss