It's actually a simplex 2901 9838. (4:16) So it's not a (Simplex 2901-9806]‐[Simplex 2903 light plate) It's actually a (Simplex 2901-9838]‐[Simplex 2903 light plate)
That looks like a pretty decent homemade panel you've got there. Although let me give you a recommendation to make it better. Get a sheet of lexan plexiglass and a can of white spray paint and paint one side of it. Use that to replace those two blank wall plates you've got in your panel with one large, smooth plate. What you're doing now is rather ugly. Also, what is that panel running on? It's gotta be a microcontroller by how it behaves.
Sounds like a good idea, I'll give it a go when I can. The panel doesn't have any kind of microcontrollers (except the System Sensor sync module, if you count that). It uses a Potter time recycle relay (like the one you used to use for smartsync), with adjustable on and off time, for march time, a system sensor MDL for code 3, and a bypass for continuous. I am planning on making a video on how it works at some point in the near future.
hey FrostedStrobes, when is system test 14 coming out, cuz i want you to keep the 9838 with the 2903 in the same spot, put the 9833 on the 40-50-80 light plate, and put the vibratone where the bell is, and put your hdcvm where the farady horn strobe is and keep the rss.
I need to buy parts for the new panel, but I am saving money for something else. I need to focus my efforts towards school. My hope is that I can make it at some point in July.
The pitch differs between different horns, so one 9838 may not sound like another. This creates an amazing dissonance effect in large buildings. It may also change depending how tightly it's screwed into the back box. Mine to sounds the way it does by chance.
+FrostedStrobes Your 9838 sounds exactly or pretty much like mine. It has a much lower pitched tone (as opposed to the more higher pitched sounding 9838s).
I don't think the strobe has a model number. It's a four wire device, with all four connections on the bell. The only model sticker is on the bell as well.
I learned about the basics of circuits and electronics. Through trial and error, and a ton of relays, I managed to put together my first piece of garbage (System test 4). After learning what went right and wrong from that, and discovering some new parts, I built the next one (System Test 7). And now, I've built the latest generation, which has yet to be revealed for the most part. There are still a few things I want to work out before I make the next video.
What in the world? The Simplex 2901-9806 Sounds Like It’s 90 Years Old!
9838
It's actually a simplex 2901 9838. (4:16)
So it's not a (Simplex 2901-9806]‐[Simplex 2903 light plate)
It's actually a (Simplex 2901-9838]‐[Simplex 2903 light plate)
@@firesafetyclass2903 he wasnt talking about that one
@@TheOnlyAries19oh..., so, he's really talking about the pyrotronics hdc 24.
@@firesafetyclass2903 the pyrotronics hdc-24.
That looks like a pretty decent homemade panel you've got there. Although let me give you a recommendation to make it better.
Get a sheet of lexan plexiglass and a can of white spray paint and paint one side of it. Use that to replace those two blank wall plates you've got in your panel with one large, smooth plate. What you're doing now is rather ugly.
Also, what is that panel running on? It's gotta be a microcontroller by how it behaves.
Sounds like a good idea, I'll give it a go when I can.
The panel doesn't have any kind of microcontrollers (except the System Sensor sync module, if you count that).
It uses a Potter time recycle relay (like the one you used to use for smartsync), with adjustable on and off time, for march time, a system sensor MDL for code 3, and a bypass for continuous. I am planning on making a video on how it works at some point in the near future.
I take it you're using some relays wired as latching relays for other functions then?
Yes
NewAgeServerAlarm
Is it weird that I'm subscribed to both NewAgeServerAlarm and NewAgeServer?
12:19 Cat: Uhhh Human?, Why Am I Hearing Those Alarms?
Human: It’s For My Video
Cat: I’m Out
The 4050 sounds like a duck quacking 😂❤😂
Fr tho.
Thats a pyrotronics HDC rebranded simplex 9806
Click here to hear the Fire alarm go off
----> 4:03
❤️
11:38 bro I would shit my pants if I heard that raspy paratronx horn go off in continuous while I’m sleeping
I think the horn on the light plate is messed up because it probably has dust and stuff on the sounder and it makes it get messed up a lot!
4:24, is that alarm supposed to sound like that? It sounds rather sick..
I watched that 50 times
It's sick unfortunately 😔
It needs filtered DC power, moder panels power unfiltered DC power.
No its because the other alarms are sucking up all the voltages so that horn is not getting the volts its supposed to.
It’s just a sick vibratone, they don’t usually sound like that
Your cat really likes you, that’s why he or she is following you everywhere.
I always thought 9838s were higher pitched. Huh.
My school has 9838s and there low pitch and there actually not really loud
11:26 I found out what switches to flip for the continuous code. You flip all 1,2,3 switches on
4:28 The most messed up alarm ever.
I know
Yeah.
i remember watching this video 4 years ago!
The 9838 Horn strobe has a weird Palse In March time
Well also in code 3
oh I have an Edwards genesis red and white strobes showing and a simplex T-bar but I call that a T-pull station, by the way btw love the cat anyway
The pirate Tronics horn is really raspy I do not know why but it’s still a great system
(Pyrotronics)
@@firesafetyclass2903 Probably annoying autocorrect
My Simplex 2901-9806 Sounds messed up like your Pyrotronics horn
Then when i tested it yestarday it started working better outta nowhere
My 450D is doing that
Oh.
Your cat was not impressed lol.
12:20 LOL The cats face!
4:32 it sounds like a duck dying
Molly Reed 🦆🔫
I always thought the 9838 quacked
hey FrostedStrobes, when is system test 14 coming out, cuz i want you to keep the 9838 with the 2903 in the same spot, put the 9833
on the 40-50-80 light plate, and put the vibratone where the bell is, and put your hdcvm where the farady horn strobe is and keep the rss.
I already said I was replacing the 4050-80 with the GX90S-4, also I mentioned I don't want horns next to the panel.
FrostedStrobes ok
FrostedStrobes but plz keep the 2903-9838
FrostedStrobes When is your next video going to be? Just curious. I understand if you're busy or something; I am too, just wondering.
I need to buy parts for the new panel, but I am saving money for something else. I need to focus my efforts towards school. My hope is that I can make it at some point in July.
That poor alarm at 11:42. It's saying "MAKE IT STOP!! I"M DYING!!"
+Frosted Strobes Try to geta new Pyrotronics or Federal Vibratone or 9806
Piratronix horn is on continuous, BUT it’s in code 3!
The Cat:oh crap!! @ 12:18
My Federal Signal (which is rebranded by ADT) sounds bad. Its on 24 V DC. When it faces down it sounds good.
Ftffgghggg
Ererrtyyyyyjjjol
Ay dude I wanna start my own American / British alarm system and all I need is a spare 7002t bc I don’t have one and a panel
That’s a cool system but it’s really loud especially on continuous
All systems are loud on continuous
Well Tocqueville fix crashing while it keeps.
11:37 oh yeah (system goes into alarm)
12:19
Cat: wtf is happening here
12:23
Cat: YEET
out of all of these which one ur fav mine is the buzzer one with the white flashing light
In this system test: Simplex 4050-80 (red light). In my whole collection: Still the 4050-80.
3:22 I have these in my other school from Florida.
There is Symplex tea bars in my school
poor pyrotronics horn its sick
Didn't I see the alarm in the garage
I need more frosted strobes lol but I can't get ebay tho
??? It’s free to sign up but you do have to pay
New system test 2 with njmoo3652 the ummt sound the same
Your cat was not impressed at 12:20. 😂
He used to be able to walk in that back room
4:29 makes me laugh every time I hear it
How do you get the 9838 to sound the way it does??
Not sure what you mean by that. You mean the coding? Pitch?
FrostedStrobes the pitch
The pitch differs between different horns, so one 9838 may not sound like another. This creates an amazing dissonance effect in large buildings. It may also change depending how tightly it's screwed into the back box. Mine to sounds the way it does by chance.
+FrostedStrobes Your 9838 sounds exactly or pretty much like mine. It has a much lower pitched tone (as opposed to the more higher pitched sounding 9838s).
Was that your cat?
Yes.
Did you know that the fire alarm that sound like a ummt, i saw that one at shop rite
That alarm that u had In code three when on continues if it is a multitone it has a dial on the back for diffrent tones
I want to build a fire alarm panel, just like frosted strobe did
Whats the model of the alarm that has the bell on it?
(Fire alarm brand) (Model number)
Wheelock 46T-G6-24-WH
+FrostedStrobes Just the strobe, Not the bell. (Not the faraday strobe)
I don't think the strobe has a model number. It's a four wire device, with all four connections on the bell. The only model sticker is on the bell as well.
12:20 cats face is funny
Why does your 4050 sound like a dying duck?
My Daycare makes that sound
4:33 One of the alarms has a scatchy throat XD
MinerMini2115 ikr
It sounds very funny
Screech screech screech screech screech
XD
MinerMini2115 lol
Me and tabby are bffs and same as Fritos videos are you the cat in the video?
what are you using for the marchtime circuit
He mentions for it in one of the earlier system test vids, though I remember the relay is made by Potter
I like how when you reset the pannel on 6:00
Correction, 6:02
It’s 6:02 u dum
Sorry I am retarded
I have that 46 century in my school.
That is awesome!
Put up all spectralert advances for next test on code 3 hi volume
the light is like lighting
The Wheelock RSS & the Pyrotronics Cerberus & the faraday bell strobe
12:19 cracked me up😂
Mr. cat
How
The cats face
Yea lol
W
My school uses code 3 for their alarms
Cool at my elementary school we had simplex alarms set on continuous
12:20 THE DEMONS ARE COMING
DJ ENDIE09 bro this was 2 years ago do u think i understand now
do it on system test 15
The vibratone 450 reminds me of one of SAFETECH's videos...fire alarm test 13 or something.
firefreak57 that was the fs vibratone,
are you using a sync module?
Traffic Control Freak Other than the MDL, I doubt it. The MDL runs the code 3.
A GREEN EFFECT? GET OUT OF MEGA PHOTO AND DON'T TURN ON THE FIRE ALARMS!
Thats his own system. Obviously he wouldn’t pull a public fire alarm.
If your sick shouldn't you not set off the fire alarm because you will get a worse headache? If you have one
Didn't have one.
Even then he’d wear ear protection
Why don't you try out the drill button
How did you make your panel?
I learned about the basics of circuits and electronics. Through trial and error, and a ton of relays, I managed to put together my first piece of garbage (System test 4). After learning what went right and wrong from that, and discovering some new parts, I built the next one (System Test 7). And now, I've built the latest generation, which has yet to be revealed for the most part. There are still a few things I want to work out before I make the next video.
I like your panel and your fire alarms
Whats the clicking sound after you silence it?
A special relay that turns itself on and off for a specified amount of time. It's what I used to get the March time.
I had a fire drill today at school
Did you make the panel yourself
Yes.
@@FrostedStrobes how hard was it to make it
Awesome!
Thanks!
I think the March time is a little fast
I have to manually adjust it so it wont be perfect.
The Symplex is my favorite horn
Jessica TV its spell simplex not symplex dumbass
FrostedStrobes Do a test with the Simplex Truealert and the wheelock chime and the RSS but take down the bell and keep the others.
Hey frostedsrrobes! I hope ya feel better!
SYSTEM TEST 13: 🔥
The simplex 4050-80 sounds disgusting
Nice panel u got there
keep it going 😇😇😇
Spam bot 👺👺👺👺
@@Fa_UTG wtf💀
Inside the house of fire drill 🎉
13:28 All Alarms sounding
12:21 LMAO!!!!!!!!!!!!!
Dirty Wheelock RSS 8:45
I hope you get better from being sick
Your cat is not impressed lol
Your following me everyone why 😂😂😂
“Everywhere” classic mistake
That thing is so loud
Congratulations! I almost went deaf because of how loud youre thing was
I'm gonna try and get my 9838
I have the same bell strobe
Cool
Thanks!
@@FrostedStrobes❤❤❤❤❤❤
btw thats a request
11:41 LMAO
LOLLL
you have a cat yay
That one alarm funny!!😎😋😋
Haha. Home alone!
Ben a wile Sense 2013
Cute cat :3
I’m Your Biggest Fan
How about doing an actual video with frosting on strobes for real, like your username.
He is very sick