Does the 'newer' stock First Strike t15 barrel come with a ramped feed? I just picked up an early Tiberius arms t15 and it has a blunt feed like the stock adapter. Should i mod this old style barrel?
Does the barrel adapter effect anything I want to buy the freak XL barrel kit and the cocker adapter but I am curious if the adapter will mess with the flow of air going through the barrel at the start or anything ?
@@Prudyk1026Thanks for the quick reply. The standard Bolt (gen 5). yes nose up and fin down correct. With the lapco 11.5 it works perfectly, but with the 14.5 the FS flips. The V2 magazines have been edited and that can't be the problem.
Sorry, I didn’t t realize you asked for a video for that. Thought you just asked for a description. I can make a video for sure. I just need to see if I have an unmodded spare mag release to use for a video
@@Prudyk1026 no worries I didnt mean to come across as demanding and I can see the confusion i didnt specify a request. Whenever you can no rush. Thank you very much.
@@guerillalou2312 some bad news man. The T15’s I currently have are apparently older gen T15’s that didn’t need the mod to it. The newer version T15’s I had are no longer with me…. When/if I manage to get a hold of a newer T15, the mag release mod video will be first on my list.
Dude you're doing great with the t15 mods I hope this helps. My last event I bought 300 dollars of first strikes and most of them chopped I did the mag trick. I sanded the tips down.. and still was getting flipping and chopps some times the first strike didn't even feed all the way in and I have to bang on the mag to push it up
Make sure the mags are kept clean, that can help prevent the follower getting hung up inside the mag, there are other potential reasons for chops. First thing you need to determine is which end of the fsr is getting chopped… :)
@@Prudyk1026 the butt end. Fins are just getting crumbled. Lol but the front have most the times fine. So it's like the back goes up first or hits something right when it's about to chamber.
@@SirArcticPB ok… there’s are different things that can cause that. This vid has helped eliminate the fin end flip but there can also be a few other causes… if you have Facebook, reach out to me there and I can go over a few other things to look at before you do some grinding.
![[BAEMON NEWS 7] NEW ALBUM COMING IN](http://i.ytimg.com/vi/wtVeAPimOyo/mqdefault.jpg)
Keep this up dude, good work.
Does the 'newer' stock First Strike t15 barrel come with a ramped feed? I just picked up an early Tiberius arms t15 and it has a blunt feed like the stock adapter. Should i mod this old style barrel?
Does the barrel adapter effect anything I want to buy the freak XL barrel kit and the cocker adapter but I am curious if the adapter will mess with the flow of air going through the barrel at the start or anything ?
Ive never heard of someone having issues honestly….The adaptors i have fit nicely with no gaps between barrel and adaptor…
I have the problem that the fin gets stuck at the back of the barrel, do you have any advice for me?😅 Best regards🤘🏽
@@NoahFS15 are u running the full auto bolt? And by ur decription, the fsr are flipping nose up, fin down
@@Prudyk1026Thanks for the quick reply. The standard Bolt (gen 5). yes nose up and fin down correct. With the lapco 11.5 it works perfectly, but with the 14.5 the FS flips. The V2 magazines have been edited and that can't be the problem.
Nice!
I know I sound like a broken record but will you make a video on how you mod an Odin works mag release?
Sorry, I didn’t t realize you asked for a video for that. Thought you just asked for a description. I can make a video for sure. I just need to see if I have an unmodded spare mag release to use for a video
@@Prudyk1026 no worries I didnt mean to come across as demanding and I can see the confusion i didnt specify a request. Whenever you can no rush. Thank you very much.
@@guerillalou2312 all good man…. I found a spare mag release… give me a bit to throw a video together …
@@guerillalou2312 some bad news man. The T15’s I currently have are apparently older gen T15’s that didn’t need the mod to it. The newer version T15’s I had are no longer with me…. When/if I manage to get a hold of a newer T15, the mag release mod video will be first on my list.
@@Prudyk1026 I appreciate it. I bought one, and they are not cheap. I just want to make sure that I do it correctly.
Dude you're doing great with the t15 mods I hope this helps. My last event I bought 300 dollars of first strikes and most of them chopped I did the mag trick. I sanded the tips down.. and still was getting flipping and chopps some times the first strike didn't even feed all the way in and I have to bang on the mag to push it up
Makes since now it was catching on the barrel adapter
Make sure the mags are kept clean, that can help prevent the follower getting hung up inside the mag, there are other potential reasons for chops. First thing you need to determine is which end of the fsr is getting chopped… :)
@@Prudyk1026 the butt end. Fins are just getting crumbled. Lol but the front have most the times fine. So it's like the back goes up first or hits something right when it's about to chamber.
@@SirArcticPB ok… there’s are different things that can cause that. This vid has helped eliminate the fin end flip but there can also be a few other causes… if you have Facebook, reach out to me there and I can go over a few other things to look at before you do some grinding.
@@Prudyk1026 okay forsure same name? On fb