I have had 10 different jobs going at the same time use up parts on one go to the next jamb hoods, fenders,doors,tail gates,beds, etc etc. It's controlled cahos when you're busy I am sure they have customers cars also....repaiables are good fill ins and make a little money on or a killing if ya buy it right.....but seldom do they buy used parts most of the time it's should be in in a few days from the dealer....I am mostly a " why go new when used will do" but I didn't get checks from TH-cam and sponsors...I think it is great they can do it and make loads of cash 👍...not me though I got a face made for radio.
@@ronaldmoparornocar9590 a lot of parts are not interchangeable so you have to go new, if it takes software to work it can only be mated to one car. Unless you know how or a guy to make it "dumb" again or no software
As uzh...killer content. Love the clean delivery - without profanity or vulgarity. Just plain and pure intelligent communication. Your parents grew you up right. Thanks for being a beacon of light for your generation.
Absolutely awesome, good job, cant wait for the sanding block gliding over the mustang, wet sand ,primer. Main event please. Mustang needing some loving
Couple tricks I learned from an old body man (40 plus years). He always washed the car with warm soapy water before and after sanding, used filtered compressed air to dry it. The reason was to remove all grease and dirt from the body jams and panels. Number two; never us a bucket of water when wet sanding (yes, never), always get the water from a garden hose. Turn the water flow down so your not getting drowned and tape up the metal end. What this does it flushes the paint that is removed by the sanding process away from the work area. When you use a bucket our recycling the dirt and removed paint. You may think that these two steps are unnecessary or worthless but as you gain and grow your paint and body skills they will be the next level for increasing your skill set making you a better body man as your work always displays your level of skills. Great job.
I recently got into an accident with my f30 340 and man am I glad to say I walked away with my life and so did the other driver. Watching this video just gave me hope that I may be back on the road with my baby again. Love the content! Gave me all the faith I needed and lesson well learned!! MAINTANCE>MODS
Another amazing rebuild. Liking a lot the "Aztec gold" color on the McLaren. Hope you consider keeping it. Check the "Volcano Red" paint combination. Is also very cool.
@@RogerM88 Problem with the factory color is that it's really hard to match if you don't buy the paint straight from McLaren and they won't sell it to them and it's VERY expensive, a color change is the best option
wow absolutely beautiful paint job! you are killing it with these bmw turn arounds. hopefully its paying off well if youre flipping them. half of tennessee gonna be rolling in used beemers lol
This video was awesome best when I've seen so far. Love the slow motion during the painting process You really shows how fun things can be when restoring cars. And like always great body work.
I have the same GTS hood for my 2014 F30, and it had some dents too. Its where they weld the support from underneath. It pulls the top part of the hood down and creates the dent. Had to have mine fixed before paint too.
Are you fucking serious?, the bodywork on the hood is terrible and the color match is not even close, look at the left fender where it meets the bar. What a joke, can't even match white. LMFAO "Amazing job". For the record, I'm a body man with over 35 years in the game, I know what I'm looking at, but to be fair, this is the first instance of me seeing these guys actually being slack and not doing the job right..
Hey man excellent job on the car.....but your missing the front splitter on the front bumper. The car has the m performance pack. The front bumper needs the splitter
You Guys did again!! Nice car and it look excellent and the color beautiful blends in with the rest of the car, Paul did a amazing paint job as always! Loved this video and the music fits so well with this video, my compliments for the job, editing and the music !
Great job on the repair, car looks fantastic! Great job on the edits in today's videos too. Music and camera work on point! Anything upcoming on the LS swapped BMW?
Sharp car! Nice work, Ven, you and Paul both! Cousins Simeon and Eleazar"s sisters were having a blast over on Fat Finger Foods- any chance your's might show up sometime? Saw the Hellcat frame fix- great work, collision work at the top of the game! Between your finish and Yuri's welding it looked factory ftw! FR
where do you get your bmw parts please list them i have 340i 2017 currently rebuilding it and i need everything the front bumper requires from radiator to everything on bumpers
i like this channel & been following it for years now; however i think the paint jobs are mostly of poor quality from prep work to the paint booth. The middle of the hood on this 340i isn't spot on (far from it actually), & can be clearly discerned b/w 16:10 to 16:13. the paint booth floor isn't water sprayed to catch all particulates, the masking is really not required when you can dismantle a hood, fender, & front in 5 minutes and have the entire parts painted from all sides (back & front) instead of just the outer side just like you'd see it from factory.
He's so talented. Just fixed 2 bmw's and a hellcat while he's waiting for McLaren parts 😄
any decent body tech could do that and more.
I have had 10 different jobs going at the same time use up parts on one go to the next jamb hoods, fenders,doors,tail gates,beds, etc etc. It's controlled cahos when you're busy I am sure they have customers cars also....repaiables are good fill ins and make a little money on or a killing if ya buy it right.....but seldom do they buy used parts most of the time it's should be in in a few days from the dealer....I am mostly a " why go new when used will do" but I didn't get checks from TH-cam and sponsors...I think it is great they can do it and make loads of cash 👍...not me though I got a face made for radio.
@@ronaldmoparornocar9590 a lot of parts are not interchangeable so you have to go new, if it takes software to work it can only be mated to one car. Unless you know how or a guy to make it "dumb" again or no software
& also for the Mustang Parts.
He is the real thing 👍👌
As uzh...killer content. Love the clean delivery - without profanity or vulgarity. Just plain and pure intelligent communication. Your parents grew you up right. Thanks for being a beacon of light for your generation.
Absolutely awesome, good job, cant wait for the sanding block gliding over the mustang, wet sand ,primer. Main event please. Mustang needing some loving
Couple tricks I learned from an old body man (40 plus years). He always washed the car with warm soapy water before and after sanding, used filtered compressed air to dry it. The reason was to remove all grease and dirt from the body jams and panels. Number two; never us a bucket of water when wet sanding (yes, never), always get the water from a garden hose. Turn the water flow down so your not getting drowned and tape up the metal end. What this does it flushes the paint that is removed by the sanding process away from the work area. When you use a bucket our recycling the dirt and removed paint. You may think that these two steps are unnecessary or worthless but as you gain and grow your paint and body skills they will be the next level for increasing your skill set making you a better body man as your work always displays your level of skills. Great job.
I recently got into an accident with my f30 340 and man am I glad to say I walked away with my life and so did the other driver. Watching this video just gave me hope that I may be back on the road with my baby again. Love the content! Gave me all the faith I needed and lesson well learned!! MAINTANCE>MODS
Love how his face lights up when he says "let's get straight to work"
Another amazing rebuild. Liking a lot the "Aztec gold" color on the McLaren. Hope you consider keeping it. Check the "Volcano Red" paint combination. Is also very cool.
He has already stated that it is to be white. I like the gold also.
@@drewmiller3462 not a big fan of his color choice for this model. A more vibrant color seems to feet better the car.
@@RogerM88 Problem with the factory color is that it's really hard to match if you don't buy the paint straight from McLaren and they won't sell it to them and it's VERY expensive, a color change is the best option
17:23 rejected that puppy cuddle! How dare you, there's always time for puppy cuddles! 😂
wow absolutely beautiful paint job! you are killing it with these bmw turn arounds. hopefully its paying off well if youre flipping them. half of tennessee gonna be rolling in used beemers lol
OMG this headlights.. this body... I love this car!
This video was awesome best when I've seen so far. Love the slow motion during the painting process You really shows how fun things can be when restoring cars. And like always great body work.
Amazing... Great job man! I noticed a Color difference between the front bumper and hood. Also, the engine doesn't sound well...
Looking good, and the paint job is first class!!
I have the same GTS hood for my 2014 F30, and it had some dents too. Its where they weld the support from underneath. It pulls the top part of the hood down and creates the dent. Had to have mine fixed before paint too.
Ur instrumentals are so soothing.great talent by the way👏🏽
I like this video. The painting was very ASMR. Very nice work!
I love the storm trooper paint jobs on bmws. It works so well.. great work!
Thumps up for the Guy who is the painter.... Amazing Job, He never dissapoint....
Are you fucking serious?, the bodywork on the hood is terrible and the color match is not even close, look at the left fender where it meets the bar. What a joke, can't even match white. LMFAO "Amazing job". For the record, I'm a body man with over 35 years in the game, I know what I'm looking at, but to be fair, this is the first instance of me seeing these guys actually being slack and not doing the job right..
I think he is being sarcastic, the 5-series paint job had more orange peel then 500 kilo's of oranges
@@JohnnyBeGood123 Peel is not a pigment :/
I've said it before but it need's repeating, damn kid you are GOOD you make it look simple, love your work and channel.
15:41 Paul is smiling, I'm shook. Looking good!
LOOK LIKE PAUL WAS DOING MOST OF THE WORK VtUNED WAS ON HIS PHONE MOST OF THE TIME
You should tag the soundtrack used too.
That stuff was banger
Who else feels like their weekend is incomplete without a VTuned video?
Brilliant work that, you and Paul completely nailed that and the 340i has been saved 👍👍
The car looks amazing 💯👍🏻
dude you’ve grown so much since the mustang and hellcat vids! so glad i’ve been around for so long, keep it up man!
Everything just sooo right and perfect. And as for Pauls ability with the colour....unbelievable.
Well done . Another success.
Cheers, Bob
Looks great. I saw them H & R lowering springs. Just did those on my M2.
Looking forward to seeing you tune this bad boy.
Fun to watch a professional work on cars. Thanks!!
Dude, finish e30 and Mustang, these are great projects :) 🔥
WAAAAA!!!WAAAA!!! MUSTANG BUILD !!!
Mustang is a long term project that is bigger than these little rebuilds and needs some planning and parts which take time.
You lookin smart and sharp asf in them glasses brother. Keep hustling and working hard
You always come through bro🔥🔥🔥
Mkhaya wamii....
Youre so good in building cars , but man the painter Is also really good👌🏻👌🏻greetings from the netherlands
Wow that BMW looks fantastic buddy damn good job.
Quality job man! 👌🏻👌🏻👌🏻
Great job you guys make it look so easy!
Hey man excellent job on the car.....but your missing the front splitter on the front bumper. The car has the m performance pack. The front bumper needs the splitter
Really turned out nice thank you for your videos.
The rewards for all the hard work looks awesome 👌
Nice slow mo ! 👏
Man that thing is slick as glass and ghostly white.Amazing job Tennessee.
I am a fan from South Africa, good work my man and I love your channel. When are you going to start work on the Mclaren, can't wait to see completion
Came out real nice. Great work.
What an amazing paint job.
You killed it as always a big tums UP to you and your team for doing amazing work.
Editor is fire
Enjoying the BMW Vids.....while i wait for the main event to return! ... lol
Amazing content 🔥🔥🔥
When Vtuned drops a video its an instant click to watch.....I like these fast jobs but cannot wait till the Mc Claren work again...
What a body sprayer Paul is nice job 👍 amazing 🤩
Great thing is most of the time those nice aftermarket goodies are cheaper than OEM and are usually better built.
lmao aftermarket is rarely better than OEM so many idiots in this comment section that know jack shit.
You Guys did again!! Nice car and it look excellent and the color beautiful blends in with the rest of the car, Paul did a amazing paint job as always! Loved this video and the music fits so well with this video, my compliments for the job, editing and the music !
V tuned just kicking it. 👍👍👍🇬🇧🇬🇧🇬🇧
17:57, SWEET!
Great work as always. Paul is a genius at work. Joe
Great job on the repair, car looks fantastic! Great job on the edits in today's videos too. Music and camera work on point! Anything upcoming on the LS swapped BMW?
Looks sharp Man! Keep up the great work!
Great Work 💪
You need an mperformance kit on it now with some sick ass wheels
Sharp car! Nice work, Ven, you and Paul both! Cousins Simeon and Eleazar"s sisters were having a blast over on Fat Finger Foods- any chance your's might show up sometime? Saw the Hellcat frame fix- great work, collision work at the top of the game! Between your finish and Yuri's welding it looked factory ftw! FR
”Cold air intake” the filter sits in the hottest part of the engine bay 🤣
Paul always does a killer job with paint. not a big fan of the bonnet. but either way all turned out nice. its a great car
He is the real Benny in Gta5 🔥❤️
really very very beautiful this 340i
Love the channel. No nonsense straight to work. I hope you reconsider the yellow gold for the McLaren instead of white.
The car turned out awesome, excellent job and that shop puppy is so damn cute.
Great repair
I hope we'll have an update on the 720s soon! 👍
Great music during the paint process. 👌
See thats how its done 16:50 you have to ask the car really nicely to just work :D
I saw the H&R springs box ? Hopefully its going on the 340i
4:30 looks like Al Pacino in Scarface!
loving the BMW's! keep them coming
Wow man, that Paul can paint for shure 👏🏻🙌🏻💪🏻👈🏻
When you going to paint the Mc Claren? that white is gonna look good.
where do you get your bmw parts please list them i have 340i 2017 currently rebuilding it and i need everything the front bumper requires from radiator to everything on bumpers
Don’t lower that car looks great as is
Отличная работа,но ремень генератора надо протереть или подтянуть-СВИСТИТ)
absolutely fantastic channel would be nice to have a price breakdown cost to purchase ,parts to fix and then profit
Nice quick build here! How's the McLaren 720 coming along?
Great wee puppy👍
Nice work V.
Great stuff dude killing hey whats the name of the music playing when you were in the paint booth that sounded good.
Great job dude! Really nice car for someone's wife. I'm really looking forward to the McLaren.
Great work, as always
That hood looks mean and I like it
When mustang's project continues
Use a "Dent Wizard" for those small dings... Save yourself some elbow grease.
Nice job Ben keep up the good work
Amazing work car look like new ,whatever happen to the Ram truck?????
Ya I love bmw love it and the mclearen 720 that’s my dream car nice work vTuned
Nice job bro..
Yo bro you should mention what type of sand paper you use for each panel
You need a jetski for a next project
VTuned flips cars faster than I can flip a coin lol
HE FLIPED THAT MUSTANG TO THE SCRAP YARD
I flipped my couch. Got $2.
So fresh and so clean clean.
i like this channel & been following it for years now; however i think the paint jobs are mostly of poor quality from prep work to the paint booth.
The middle of the hood on this 340i isn't spot on (far from it actually), & can be clearly discerned b/w 16:10 to 16:13. the paint booth floor isn't water sprayed to catch all particulates, the masking is really not required when you can dismantle a hood, fender, & front in 5 minutes and have the entire parts painted from all sides (back & front) instead of just the outer side just like you'd see it from factory.
Cinematics 👌
Any update on the Maclaren build
WAAAAA!! WAAAAA!!< MACLAREN BUILD!!! WE WANT IT !!! WAAAA!!
Ben you are truly talented!
2018 54k miles m sport, apple car play, heads up display; 1 owner? clean carfax? 30k. Worth or too much mileage?