Now this is an informative video, the best break down and rebuild I’ve ever seen. Thank you sir your the best teacher for this subject no one in the utube world has a video as informative as this. Thanks again
I have a tekna basecoat spray gun with the blue body and it has a minor air leak, what can it be? Maybe the air valve is broken from what I heard on this video
Hi my divilbis spray gun is blowing air all the time can't see anything wrong with the air vavle in your video you said there a seal inside could that be the problem.Thanks interesting video.
Hey question. My FLG4 just suddenly started leaking out the spray tip. Cannot stop it. What happened. I do not see a combustible part that needs replaced ever 6 uses. But I did dig out some crap which looked like primer colored gunk out of the area of the gun behind the spray head. It had needed to be cleaned since I was using it to spray primer with just on one car. But I did not see any soft gasket bushing or a filter? Someone said it was the filter. I don't use a filter. So possibly why it needed to be cleaned. Perhaps it was the packing nut. Would it turn to gunk? It fell all apart when I dug it out. hmmmm. HELP! I cannot paint!
very good video, thank you for sharing. At my gun i can remove all the parts you shown except for the air inlet ......just won't unscrew for the love of God :))
for my tekna prolite it says hold the trigger in while removing cap, or installing the cap, can't remember. many manuals refer to that step and I can't figure out why because the needle is protected by the fluid tip. anyways it's in the manual fyi
Very detailed information 👍
would have liked to see you rebuild with the Devilbiss kit. the O rings and washers are the challenging part to rebuilds.
Well done I've gotten a lot from your video. Thank you
AWESOME! video. Very detailed and easy to understand. Kudos!
Now this is an informative video, the best break down and rebuild I’ve ever seen. Thank you sir your the best teacher for this subject no one in the utube world has a video as informative as this. Thanks again
If the air cap have air leaks, which part should I have to replace to fix the problem? Thanks
I have a tekna basecoat spray gun with the blue body and it has a minor air leak, what can it be? Maybe the air valve is broken from what I heard on this video
Hi my divilbis spray gun is blowing air all the time can't see anything wrong with the air vavle in your video you said there a seal inside could that be the problem.Thanks interesting video.
Thanks for the positive feedback mate👍
Hey question. My FLG4 just suddenly started leaking out the spray tip. Cannot stop it. What happened. I do not see a combustible part that needs replaced ever 6 uses. But I did dig out some crap which looked like primer colored gunk out of the area of the gun behind the spray head. It had needed to be cleaned since I was using it to spray primer with just on one car. But I did not see any soft gasket bushing or a filter? Someone said it was the filter. I don't use a filter. So possibly why it needed to be cleaned. Perhaps it was the packing nut. Would it turn to gunk? It fell all apart when I dug it out. hmmmm. HELP! I cannot paint!
Great video,I just got a tekna copper and everytime I plug in the air line the comes out from the air cap.can u help me out?
Great Video Jordan, should really help me not to mess up when taking apart the gun and rebuilding it back up.
Great video. Was having problems with my devilbiss spray gun, know I know what to check for. Thanks and will comment if it solved the problem.
Thanks please do keep us updated😁
Hi Man thanks for the video !! is it the same component for a devilbiss GTI gun i try to rebuild a spray gun ... Thanks
I have a circlip come into the spray head , can you guide me where it’s from please
very good video, thank you for sharing. At my gun i can remove all the parts you shown except for the air inlet ......just won't unscrew for the love of God :))
for my tekna prolite it says hold the trigger in while removing cap, or installing the cap, can't remember. many manuals refer to that step and I can't figure out why because the needle is protected by the fluid tip. anyways it's in the manual fyi
Yep holding trigger in or removing needle is the best way to prevent wear and tear on the needle.
Where are the seals what have to be replaced to
Have you done a gti one please
Where can I find that air valve? The plastic broke on mine and I can't find it anywhere.
spraygunsdirect, you can literally find it anywhere ebay and amazon, you're not even trying to look
do all Binks tips require the same size wrench to remove?
Most do i believe but I'm not a massive devilbiss/binks fan so I'm not 100% I'm affraid! Thanks!
Price gun k kite hn
What gun cleaning fluid did you use?
Don.
+Don Mason hi, in this video im using pure thinners. I tend not to use recycled thinners when cleaning guns.
usually it's automotive grade lacquer thinner.
what gun is you favorit? Sata, Devilbiss or Iwata?
Very nice examples
Ops
♥️♥️
Where can I buy a repair kit for this gun? Can you send me a link if possible please. Thank you.
Hi, any devilbiss spray gun distributor should be able to provide these. Thanks
Spraygunsdirect in the UK - Google it
Fluid needle Spray Gun ke parts chahie Humko kahan per Milenge adress devil bhej Ghan ke chahie