Thank you for this video. I could not find why with the fast hop I couldn’t have 100% airseal. I tried everything and when you talked about the 2 O ring at the end of the hop up. I knew it was the problem and they are actually missing on mine. Now that I fixed it and lubbed it I have 0.02 joules of difference with 100% airseal 🙏🏻
just had to add one more I hope useful comment because I want to be able to understand this vide. I used to use the illustration to my employees, 'it's great that you pushed that broom across the floor but did you get it clean?". Yes you used a camera and said stuff but did the camera catch the light? The image? Was the audio understood? The answer is, "not well enough".
True, some steps I had to use the silverback fast hop up video for and then zoom in and replay several times on both this one and the silverback video to get it.
Just installed this hop unit. The pointy grub screw you mention at 8:37 I cant find any place to place it, I also see you not even using it, what does it actually do? I hear you saying it goes on the outer barrel but the outer barrel already have two flat screws on the top and bottom to hold it in place. Is it even needed?
On never outer barrels they use a bigger screw (supplied with the srs or new outer barrel). The smaller grub screws are still included in the fasthop packet and can simply go into your spares box
No really I can't see anything in your video. Get audio but if you can't see anything and you are naming the thing that you are talking about then nothing is communicated.
Brian youre not being specific as to what you “cant see” and yes, i watched this video many times in the editing process. If you can be more specific as to what it is youre struggling with then I may be able to assist.
@@fergietowers Thanks for response. I can't see the parts. Every item is black. Best to put a light on it. It you are editing then take a close up the the part mentioned and put a light on it. You'd do well to put a light on the entire subject. that's be helpful. Be aware you are a bias editor. you know the parts and the process. Have someone who knows nothing about airsoft or even guns watch it and give you feedback. Ask them to be as brutally honest as possible. You have a heavy accent which is hard for Americans to understand so I had to listen several times. Speak clear state the full name of the part, several times it possible. It's a home made video and the only one I found. Thank you for doing the video. Just could be done better.
@@fergietowersmost specifically for me, the nub under the lever and some bits of the fast hop up screws and alignment. Pretty much the small more intricate bits.
Ok Yes the only video I found that has full editorial of the process fo the fast hop up for the SRS rifle. But Please you got to be the best. Get the camera in there. Stop saying, This that or the thing. Name it. Get some light on it. Watch the video yourself. Have your 10 year old watch it and recreate what you are doing. I can't see anything and you are not naming the parts. Thank you for doing this video but Professional to professional you can do better.
I tried installing the fast hop with the faceless sniper rhop, bucking and fow nub. The rhop and bucking achieved an air seal in the standard hop chamber but i couldnt for the life of me get the fast hop to get an air seal, even with the bucking that comes with the fasthop... also any idea when the faceless sniper stuff will be in stock in stock on the longbow website?
Thank you for this video. I could not find why with the fast hop I couldn’t have 100% airseal. I tried everything and when you talked about the 2 O ring at the end of the hop up. I knew it was the problem and they are actually missing on mine.
Now that I fixed it and lubbed it I have 0.02 joules of difference with 100% airseal 🙏🏻
just had to add one more I hope useful comment because I want to be able to understand this vide. I used to use the illustration to my employees, 'it's great that you pushed that broom across the floor but did you get it clean?". Yes you used a camera and said stuff but did the camera catch the light? The image? Was the audio understood? The answer is, "not well enough".
True, some steps I had to use the silverback fast hop up video for and then zoom in and replay several times on both this one and the silverback video to get it.
Just installed this hop unit. The pointy grub screw you mention at 8:37 I cant find any place to place it, I also see you not even using it, what does it actually do? I hear you saying it goes on the outer barrel but the outer barrel already have two flat screws on the top and bottom to hold it in place.
Is it even needed?
On never outer barrels they use a bigger screw (supplied with the srs or new outer barrel). The smaller grub screws are still included in the fasthop packet and can simply go into your spares box
is the aim suppose to go back in flat under the hop unit dial
If I installed this in the LH A2, whats it likely to look like? No issues with operation I am guessing. Nice vids BTW
Will work but there isnt a left handed silverback fasthop, just means you will need to use the numbers on the wheel as a reverse reference as it were
No really I can't see anything in your video. Get audio but if you can't see anything and you are naming the thing that you are talking about then nothing is communicated.
Brian youre not being specific as to what you “cant see” and yes, i watched this video many times in the editing process. If you can be more specific as to what it is youre struggling with then I may be able to assist.
@@fergietowers Thanks for response. I can't see the parts. Every item is black. Best to put a light on it. It you are editing then take a close up the the part mentioned and put a light on it. You'd do well to put a light on the entire subject. that's be helpful. Be aware you are a bias editor. you know the parts and the process. Have someone who knows nothing about airsoft or even guns watch it and give you feedback. Ask them to be as brutally honest as possible. You have a heavy accent which is hard for Americans to understand so I had to listen several times. Speak clear state the full name of the part, several times it possible. It's a home made video and the only one I found. Thank you for doing the video. Just could be done better.
@@fergietowersmost specifically for me, the nub under the lever and some bits of the fast hop up screws and alignment. Pretty much the small more intricate bits.
Ok Yes the only video I found that has full editorial of the process fo the fast hop up for the SRS rifle. But Please you got to be the best. Get the camera in there. Stop saying, This that or the thing. Name it. Get some light on it. Watch the video yourself. Have your 10 year old watch it and recreate what you are doing. I can't see anything and you are not naming the parts. Thank you for doing this video but Professional to professional you can do better.
I tried installing the fast hop with the faceless sniper rhop, bucking and fow nub. The rhop and bucking achieved an air seal in the standard hop chamber but i couldnt for the life of me get the fast hop to get an air seal, even with the bucking that comes with the fasthop... also any idea when the faceless sniper stuff will be in stock in stock on the longbow website?