I believe you can set these to red and then use the strobe function and slow the speed down to flash at whatever speed you'd like... or you may be able to set the static color to red in sound active... I hope this helps... Thanks for watching 👀 and commenting
Hello, and congratulations for the video. Just one question if you have eight rooms do you have to put them all in DMX with the cable or once they are synchronized you can remove the cables ?
Hello, they would have to be connected (wired) together to remain dmx'd together if disconnected they will no longer be dmx'd together that's why many people are converting to wireless dmx
Helpful production hints: 1) 'Address the Camera', PLEASE ! (Let's see your eyes) 2) Room Ambience is reverb'ng; ...a shirt MIC would be more directional, and easier to understand your comments. ~Good Luck ! Thanx for the REVIEW ! -Happy Holidays...
Agreed...thanks for the tips! We have since added foam sound diffusers in the studio and hopefully the newer videos are better quality...except the gig logs of course...thanks again
I want to use them for specials and wash for our stage. I know i can dmx them can is there a place where i might have use a powercon blue and gray. thanks very clear review.
I can see how that would be a concern, however with the Led nature of these fixtures, I haven't had any issue plugging everything into the same electrical outlet... including my subs and board... I'm curious to know if you have any issue with plugging them all in...plz let me know if it works out
These lights are Super efficient and at 36 watts times 10 that's only 360 watts total combined so it's way less then 1 or 2 old style lights. You shouldn't have any problems.
i have them at church but i cant get them to stay in the dmx address, every time i shot them off they loose the dmx address configuration. can you tell me what to do? by the way im not using the remotes
Can I get information on how to DMX all my lights together? What's the number for Master & Slave. I attempted to use the instructions, but no luck. I'm using a DMX Controller, CO-Z DMX-192. Thanks.
you put every light with their own dmx channel? like light 1 has dmx channel 001. Second one i think you need to put on 017. because fixture 2 on the controller starts at 017 etc just look in you instructions of dmx controller
How complicated do you want it to be? You can set all ten to the same channel for easy simultaneous control or each one can have it's own channel or even in whatever groups you assign. Also since only you have eight channels on "A" & eight on "B" I'd stick to between 1-4.
These are great as uplights... decent power and Beam angle and really affordable! My only issue is having to find a way to plug them all in at a venue... Thanks for watching 👀 and commenting
@@TroyShahanMusic Thanks for replying guys. Problem is I have a gig in the middle of September and ordering from China I'm looking at 2 months shipping time estimated and ordering from dealer here in the states is doubling the price. I thought I found my solution. But I guess it's not to be. Unless one of you guys are willing to sell your used gear. lol. The search continues.......
Sorry to bother you, one other question. If I know my event is going to go longer than what the batteries allow would I be able to plug this in an outlet and still run them, bypassing the battery operation? I'm sure it's yes , but I'm not positive it's yes.
Normally, I would say yes of course you can... However, these particular lights are not battery operated! They are hard wired and would all need to be plugged in at all times!
Sorry... yes one will always have to be master, but that's the one you have the setting on and the others need to be set to A001 dmx address and the one that's not should be your master
Hi, can anyone help please. Is it possible to have intermittent pulses/flash of red only? Thanks
I believe you can set these to red and then use the strobe function and slow the speed down to flash at whatever speed you'd like... or you may be able to set the static color to red in sound active...
I hope this helps...
Thanks for watching 👀 and commenting
Hello, and congratulations for the video. Just one question if you have eight rooms do you have to put them all in DMX with the cable or once they are synchronized you can remove the cables ?
Hello, they would have to be connected (wired) together to remain dmx'd together if disconnected they will no longer be dmx'd together that's why many people are converting to wireless dmx
Helpful production hints: 1) 'Address the Camera', PLEASE ! (Let's see your eyes) 2) Room Ambience is reverb'ng; ...a shirt MIC would be more directional, and easier to understand your comments. ~Good Luck ! Thanx for the REVIEW ! -Happy Holidays...
Agreed...thanks for the tips! We have since added foam sound diffusers in the studio and hopefully the newer videos are better quality...except the gig logs of course...thanks again
I want to use them for specials and wash for our stage. I know i can dmx them can is there a place where i might have use a powercon blue and gray. thanks very clear review.
If I'm not mistaken, these are all wired electrical plugs... factory wired into the light.
How many chanles ?
I believe these are 7 channel dmx... it's been a while since I've had these...
Thanks for watching and commenting
Any advice on powering these? I’m a little nervous about plugging 10 light ac’s into one outlet.
I can see how that would be a concern, however with the Led nature of these fixtures, I haven't had any issue plugging everything into the same electrical outlet... including my subs and board... I'm curious to know if you have any issue with plugging them all in...plz let me know if it works out
These lights are Super efficient and at 36 watts times 10 that's only 360 watts total combined so it's way less then 1 or 2 old style lights. You shouldn't have any problems.
Can they be sound activated?
Yes.. they do have sound active
How do you change Sound sensitivity ? When in Sound mode I cannot change anything. I would like to increase sound sensitivity, how ?
Unsure
i have them at church but i cant get them to stay in the dmx address, every time i shot them off they loose the dmx address configuration. can you tell me what to do? by the way im not using the remotes
Make sure you're saving the settings by actually pushing the save button... if you don't, they'll reset to whatever setting they were last saved at.
@@DJMikeJames does saving the program can only be done with the remote? Can it be done manually?
I have misplaced the remotes
Yes...you have to push the save or enter button once you've made your selection
Can I get information on how to DMX all my lights together? What's the number for Master & Slave. I attempted to use the instructions, but no luck. I'm using a DMX Controller, CO-Z DMX-192. Thanks.
you put every light with their own dmx channel? like light 1 has dmx channel 001. Second one i think you need to put on 017. because fixture 2 on the controller starts at 017
etc just look in you instructions of dmx controller
How complicated do you want it to be? You can set all ten to the same channel for easy simultaneous control or each one can have it's own channel or even in whatever groups you assign. Also since only you have eight channels on "A" & eight on "B" I'd stick to between 1-4.
@d.j.2nz952 I purchased a wolfmix and I figured it all out. I appreciate you responding an looking to help.
Awesome glad to hear it! Thanks to all who helped
It depends on the controller
@@DoetErNietToe
what dmx cable did you use to connect them? i used accu cable but it did not fit the dmx out port
I typically use GLS Pro cables, but you're right...sometimes on the plastic molded fixtures it can be difficult to get them to fit.
@@DJMikeJames Thanks for the help. Didn't think you would have replied considering this video is over 8 months old.
Can you get purple without using DMX?
Ya.. you can color mix them to purple individually, but not black light UV... these don't have that color
I know these aren't uplights but how effective would they be to shoot straight up a wall?
These are great as uplights... decent power and Beam angle and really affordable! My only issue is having to find a way to plug them all in at a venue...
Thanks for watching 👀 and commenting
They do shoot up the wall about 6-8 ft. 5 adjustable brightness levels
@@TroyShahanMusic Thanks for replying guys. Problem is I have a gig in the middle of September and ordering from China I'm looking at 2 months shipping time estimated and ordering from dealer here in the states is doubling the price. I thought I found my solution. But I guess it's not to be. Unless one of you guys are willing to sell your used gear. lol. The search continues.......
Sorry to bother you, one other question. If I know my event is going to go longer than what the batteries allow would I be able to plug this in an outlet and still run them, bypassing the battery operation? I'm sure it's yes , but I'm not positive it's yes.
Normally, I would say yes of course you can... However, these particular lights are not battery operated! They are hard wired and would all need to be plugged in at all times!
Can you get white?
I don't believe so...
You can, but it’s not a true white. Close enough tho.
@@d-rock737 what is the code? Thanks
@@brianring4492 it’s been too long. I don’t remember. Play around with it. Maybe i’m wrong and you can’t. Idk.
Can you use one plug for two
I would think so...
Will these work with soundswitch?
I'm not sure... I'm not using them with a dmx controller
iv just brought a 4 pack of theses and my plan is to use them with soundswitch . i will let you know, They are arriving today (22nd of may)
Update . they do work with soundswitch , and with the profile already in
Hi ,which channel setting do I use with all 10 Dmx connected without dmx controller with sound activated to synchronize
Do I need to set one to master ?
Sorry... yes one will always have to be master, but that's the one you have the setting on and the others need to be set to A001 dmx address and the one that's not should be your master
9 of them need to be set to a dmx address like A001 and the one that's not is then the master
Do you get to keep the lights sent in for review?
Yes, it was my first time with them providing the fixtures and me reviewimg them, it was a good experience hopefully I'll get to do some more 😉