INAV and tail sitter VTOL support

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ย. 2024
  • SUPPORT ME / pawelspychalski
    FPV University Newsletter bit.ly/3I3qnAJ
    FIMI Manta from Banggood bit.ly/48MpkzK
    INAV 7.1 will add a full support to tail sitter type of VTOL. INAV 7 already supports other kinds of Vertical Takeoff Or Landing crafts, but tail sitters were not fully supported. It was possible to build one, but a lot of features were just not working like expected on tail sitter VTOLs.
    INAV 7.1 changes that! All functions, including navigation will work!
    #fpvuniversity #inav #vtol

ความคิดเห็น • 15

  • @LalitSingh-ul6ii
    @LalitSingh-ul6ii 4 หลายเดือนก่อน +2

    Sir, INAV 7.1.1 version has also been released but the mixing of VTOL plane has not come yet

  • @MCsCreations
    @MCsCreations 6 หลายเดือนก่อน +1

    Sweet! Thanks, Pawel! 😊
    Stay safe there with your family! 🖖😊

  • @TheCatFather01
    @TheCatFather01 6 หลายเดือนก่อน

    Amazing work, thank you!🙏🏽

  • @jj-avi
    @jj-avi 5 หลายเดือนก่อน

    Currently building a standard VTOL. Fixed Quad Drive and Puller motor for Fixed wing. Hope INAV 7 will handle it fine. I haven't seen any videos on such a configuration, only tilt rotor

  • @ТоликКалюж-и5я
    @ТоликКалюж-и5я 6 หลายเดือนก่อน

    Good afternoon. For pensioners, there are step-by-step instructions on how to set up a vertical take-off with two engines. Thank you very much.

  • @maciejmotylinsky
    @maciejmotylinsky 5 หลายเดือนก่อน

    Hope soon will be possible set mixer manually and VTOL X Quad with 1 pusher motor will be possible to easy setup.

  • @BBFPV
    @BBFPV 6 หลายเดือนก่อน

    Yes sure, but witch mixer is for tailsitter phase, can't find anything in RC1. THX

  • @AerialWaviator
    @AerialWaviator 5 หลายเดือนก่อน

    Will INAV also support Belly Sitter VTOL?
    example: the FIMI Manta shown in the video could be easily converted to Belly Sitter just by removing the propeller on the rear motor (or adjusting C/G if motor removed). To convert to Tail Sitter would requiring modifications so could be armed and launched vertically.

    • @FPVBites
      @FPVBites  5 หลายเดือนก่อน

      You mean a bicopter? Yes, INAV supports bicopters

    • @AerialWaviator
      @AerialWaviator 5 หลายเดือนก่อน

      @@FPVBites A belly sitter has two motors with servos like bicopter, so hovers like one; but for takeoff position is sample as a fixed-wing. The initial takeoff sequence is to lift up to a tail down position. (propellers remain parallel to the horizon)
      A bicopter in contrast has landing support (gear/structure) that stabilizes so motors already in hover position.

  • @trafton00
    @trafton00 6 หลายเดือนก่อน

    2 servos that can control the flaps? Do that motors need tilt also for tail sitter?

    • @prmpfbubub
      @prmpfbubub 6 หลายเดือนก่อน +1

      no need to tilt the motors. the simpliest form of a VTOL is a wing with two fixed mounted motors and two servos for elevons. four channels in total for the flight controller.

  • @Sonic_Ox
    @Sonic_Ox 6 หลายเดือนก่อน

    Does INAV 7.1 offer any benefits to the quadcopter pilots over INAV 7.0?

    • @FPVBites
      @FPVBites  6 หลายเดือนก่อน +1

      some bugs fixed of course

    • @Sonic_Ox
      @Sonic_Ox 6 หลายเดือนก่อน

      Thank you. I'll flash it soon.